Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
The screen shows the current setting for the selected item, as well as alternate setting(s). 4. Use v / V to select the second desired option then press B to move to the third level. 5. Use v / V to select the desired setting then press ENTER to confirm your selection. Some items require additional steps. 6. Press RETURN or HOME to exit the Setup menu. [DISPLAY] Menu 19 Installation [4:3 Letter Box] – Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture. [4:3 Pan Scan] – Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both sides of the picture are cut off. [16:9 Original] – Select when a 16:9 wide TV is connected. The 4:3 picture is displayed with an original 4:3 aspect ratio, with black bars appear- ing at the left and right sides. [16:9 Wide] – Select when a 16:9 wide TV is connected. The 4:3 picture is adjusted horizon- tally (in a linear proportion) to fill the entire screen. Resolution Sets the output resolution of the Component and HDMI video signal. Refer to “Resolution Setting” on page 17 for details about the resolution. 1080p Display Mode When the resolution is set to 1080p, select [24Hz] for smooth presentation of film material (1080p/24Hz) with an HDMI-equipped display compatible with 1080p/24Hz input. Notes: • When you select [24Hz], you may experience some picture disturbance when the video switches video and film material. In this case, select [60Hz]. • Even when [1080p Display Mode] is set to [24Hz], if your TV is not compatible with 1080p/24Hz, the actual frame frequency of the video output will be 60 Hz. • When the 1080p/24Hz video source is outputted via HDMI connection, the VIDEO OUT and COM- PONENT VIDEO OUT will not output any video signal. • If you want to set the 1080p/24Hz, set the resolu- tion setting to [1080p] and [1080p Display Mode] option to [24Hz]. HDMI Color Setting Select the type of output from the HDMI OUT jack. For this setting, please refer to the manuals of your display device. [YCbCr] – Select when connecting to an HDMI display device. [RGB] – Select when connecting to an RGB dis- play device. Note: When you connect the HDMI OUT jack to DVI dis- play device, the [HDMI Color Setting] will automati- TV Aspect Ratio cally switch to [RGB]. [LANGUAGE] Menu Display Menu Select a language for the [Setup] menu and on- screen display. Disc Menu / Disc Audio / Disc Subtitle Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. [Original] – Refers to the original language in which the disc was recorded. [Other] – Press ENTER to select another language. Use number buttons then ENTER to enter the corresponding 4-digit number according to the language code list on page 33. [Off] (for Disc Subtitle) – Turn off Subtitle. Note: Depending upon the disc, your language setting may not work for some discs. [AUDIO] Menu Each disc has a variety of audio output options. Set the player’s Audio options according to the type of audio system you use. Note: Since many factors affect the type of audio output, see “The unit’s Audio Output Specifications” on page 36 for details. HDMI / SPDIF (Digital Audio Output) Select the output sound format when a device equipped with an HDMI or Digital Audio input jack is connected to the HDMI OUT or DIGITAL AUDIO OUT jack on this player. [PCM Stereo] – Select if you connect this unit’s HDMI OUT or DIGITAL AUDIO OUT jack to a device with two-channel digital stereo decoder. [PCM Multi-Ch] (HDMI only) – Select if you connect this unit’s HDMI OUT jack to a device with multi-channel digital decoder. [DTS Re-Encode] – Select if you connect this unit’s HDMI OUT or DIGITAL AUDIO OUT jack to a device with DTS decoder. [Primary Pass-Thru] – Select if you connect this unit’s DIGITAL AUDIO OUT and HDMI OUT jack to a device with LPCM, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS and DTS-HD decoder. Notes: • When [HDMI] option is set to [PCM Multi-CH], the audio may output as PCM Stereo if the PCM Multi-Ch information is not detected from HDMI device with EDID. • If the connected device is only capable of PCM, the menu can be changed but it will not affect the actual output format. Sampling Freq. (Only for SPDIF audio) [192KHz] – Select this if your A/V Receiver or Amplifier is capable of handling 192 KHz signals. [96KHz] – Select this if your A/V Receiver or Amplifier is NOT capable of handling 192 KHz signals. When this choice is made, this unit automatically converts any 192 KHz signals to 96 KHz so your system can decode them. [48KHz] – Select this if your A/V Receiver or Amplifier is NOT capable of handling 192 KHz and 96 KHz signal. When this choice is made, this unit automatically converts any 192 KHz and 96 KHz signals to 48 KHz so your system can decode them. Check the documentation for your A/V Receiver or Amplifier to verify its capabilities. DRC (Dynamic Range Control) When a disc encoded in Dolby Digital ...
Este manual também é adequado para os modelos :Blu-Ray - LVT2007-029C (1.28 mb)