Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
3D SURROUND: The audio out is virtual surround sounds (only for 5.1CH player). OFF: Turn off DOWNMIX function. If playing 5.1CH discs or the unit is connected with 5.1 channel amplifier, this item should be selected (only for 5.1CH player). FRONT, CENTER, REAR and SUB-WOOFER SPEAKER: (No this item in 2CH player) If your speaker system includes the above speakers, you can set these items according the real speaker status. DIALOG: The DIALOG mode is available, and you can press up and down direction key to adjust it. (In the DOWNMIX mode, LT/RT or STEREO is selected). D.R.C: The D.R.C can control data record. You can chose AUTO, ON and OFF in this mode. TV Display: 4:3 PANSCAN: When the unit connects to the normal TV set, the widescreen image shows on the full screen, but some part is cut off. 4:3 LETTERBOX: When the unit connects to the normal TV set, the widescreen image shows and black bars appear on the top and bottom of screen. 16:9: 7 4060.indd 7 -ф- 23.10.2006 9:25:12 ENGLISH DIGITAL AUDIO SETUP PAGE 3D PROCESSING: m\ it DIGITAL AUDIO SETUP PAGE DIGITAL OUTPUT RAW LPCM OUTPUT 48K SE LPCM SPDIF OUTPUT RATE DIGITAL OUTPUT: SPDIF OFF: No digital output (coaxial off), only analog audio output. ALL: If this item is selected, you can set up RAW. PCM ONLY: In SPDIF/PCM mode, setup PCM channel according to your preference. LPCM OUT: Select PCM frequency at 48kHz or 96kHz. Note: Some amplifiers don’t support 96kHz sampling, which will affect the coaxial output. DOLBY DIGITAL SETUP DOLBY DIGITAL SETUP DUAL MONO STE DYNAMIC L-MONO R-MONO MIX-MONO DUAL MONO (1 +1 ) SETUP DUAL MONO: Stereo: Set audio output to the stereo output. L-mono: Set audio output to the mono-left channel. R-mono: Set audio output to the mono-right channel. Mix-mono: Set audio output to the mix-mono channel. DYNAMIC: Select this to reduce the overall volume and still keep defined audio sound. CHANNEL DELAY PAGE: If the above setup is dissatisfying, you can set the speaker distances in the real conditions. Press up/down direction key to select the speaker, and press left/right direction key to adjust the distance. EQUALIZER: SOUND MODE OFF 1 OFF I BASS BOOST OFF ROCK SUPER BASS OFF POP TREBLE BOOST OFF LIVE DANCE TECHNO CLASSIC SOFT SELECT EQUALIZER TYPE In this item you can set sound mode, bass boost, super bass and treble boost. You can select one according to your preference and the disc content. You can press up and down direction key to adjust it. _ PRO LOGIC I REVERB MODE OFF CONCERT LIVING ROOM HALL BATHROOM CAVE ARENA CHURCH GOTO PRO LOGIC II CONFIG PAGE In PROLOGIC ON mode, the reverb mode setup is available. HDCD SETUP: You can select the digital filter at off 1x and 2x. KARAOKE KARAOKE can be controlled to output by the setup menu. There are 2 optional output modes: ON/OFF. MIC Adjust microphone volume to the minimum level. Insert microphone into the microphone jack. MIC VOL Use the microphone volume knob to adjust the microphone volume. Press up/down direction key to adjust the echo level in the setup menu. О IC V! О When playing karaoke disc, to eliminate the original singing, press [L/R/ ST] key on the remote controller to select left channel or right channel. When playing DVD disc, press [AUDIO] to eliminate its original singing. VIDEO SETUP PAGE VIDEO SETUP PAGE VIDEO OUTPUT COLOR SETTING RGB GOTO VIDEO SETUP PAGE COMPONENT V IDEO: OFF: Set video output to the composite. YUV: Set video output in analog component video format when connecting to Y/U/V terminals. P-YUV: Set progressive YUV signals. Connection same as YUV. RGB: Set video output in Red/Green/Blue format when connecting to SCART terminal. P-RGB: Progressive RGB signals. Connection same as RGB. VGA: Set to this item when connecting to VGA terminal. Note: If the video setting differs with the physical connection, the TV set may not have picture. In this case, you can RESET the machine, then keep pressing key [V_MODE] until the picture returns again. COLOR SETTING SETUP: COLOR SETTING includes: SHARPNESS, BRIGHTNESS, CONTRAST, GAMMA, HUE, SATURATION and LUMA DELAY SHARPNESS: There are three optional output modes: HIGH\MEDIUM\ LOW. BRIGHTNESS: Use the left/right direction key to move the scroll and adjust the brightness. CONTRAST: Use the left/right direction key to move the scroll and adjust B 4060.indd 8 23.10.2006 9:25:13 # ENGLISH the contrast. Set the left/right direction key to move the scroll and adjust the contrast. GAMMA: There are four optional output modes: HIGH\MEDIUM\LOW\ NONE. HUE: Use the left/right direction key to move the scroll and adjust the hue. SATURATION: Use the left/right direction key to move the scroll and adjust the saturation. LUMA DELAY: In this item you can choose 0T or 1T. PREFERENCES TV TYPE PAL PBC ON AUDIO ENG SUBTITLE ENG DISC MENU ENG PARENTAL DEFAULT GO TO PREFERENCE PAGE V___/ TV system: This u...