|
por este dispositivo também tem outras instruções :
Facilidade de uso
Date (mm:dd:yy) SATA Info Displays the SATA drives integrated in the system (SATA -0; SATA-1; SATA-2; SATA-3; SATA-4; SATA-5). SATA Mode AHCI by default Halt On All Error; All; But Keyboard. (All, But Keyboard by default) Advanced BIOS Features CPU Feature SpeedStep—Enabled; Disabled (Enabled by default) Execute Disable Bit—Enabled; Disabled (Enabled by default) Hyper-Threading—Enabled; Disabled (Enabled by default) Core Multi-Processing—Enabled; Disabled (Enabled by default) Intel(R) C-STATE tech—Enabled; Disabled (Enabled by default) BSotaottu Usp NumLock Off; On (On by default) Quiet Boot Enabled; Disabled (Enabled by default) Boot Configuration HParirdor Diitsyk Boot Used to set the device priority of hard drives. The items displayed are dynamically updated according to the hard drives detected. BReomootv Parbiloer Dirtiyves Used to set the device priority of removable devices such a media card readers. The items displayed are dynamically updated according to the removable devices connected. First Boot Device Removable; Hard Disk; CDROM; USB-CDROM; Legacy LAN; Disabled (Removable by default) DSeecviocnde Boot Removable; Hard Disk; CDROM; USB-CDROM; Legacy LAN; Disabled (Hard disk by default) Third Boot Device Removable; Hard Disk; CDROM; USB-CDROM; Legacy LAN; Disabled (CD-ROM by default) BSeocotur Mietnyu Enabled; Disabled (Disabled by default) Advanced Chipset Features FIinirstt Display Onboard, PCI, PCI-Express (PCI-Express by default) Integrated Peripherals USB Controller Enabled or Disabled (Enabled by default) COnobnnoaecrdto rAudio Enabled or Disabled (Enabled by default) Onboard LAN Connector Enabled or Disabled (Enabled by default) OROnMboard LAN Boot Enabled or Disabled (Disabled by default) Serial Port OFF, COM 1, AUTO, COM 3 (AUTO by default) Power Management Setup ACPI Suspend Type S1(POS); S3(STR) (S3(STR) by default) AC Recovery Power Off, Power On, Last State (Power Off by default) Remote Wake Up Enabled; Disabled (Enabled by default) Auto Power On Enabled; Disabled (Disabled by default) Auto Power On Date 0 Auto Power On Time 0:00:00 Load Defaults Load Optimal Defaults Resets CMOS defaults to factory install values. Boot Sequence This feature allows you to change the boot sequence for devices. Option Settings Diskette Drive — The computer attempts to boot from a floppy drive (if installed). If the floppy disk in the drive is not bootable, if no floppy disk is in the drive, or if there is no floppy drive installed in the computer, the computer generates an error message. Hard Drive — The computer attempts to boot from the primary hard drive. If no operating system is on the drive, the computer generates an error message. CD Drive — The computer attempts to boot from the CD drive. If no CD is in the drive, or if the CD has no operating system, the computer generates an error message. USB Flash Device — Insert the memory device into a USB port and restart the computer. When F12 = Boot Menu appears in the upper-right corner of the screen, press