Assessments - 3, GPA: 3.3
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Clean the fan (2) . Verify that all the fan assembly is firmly tightened (2) . Clean the condensate drain pan (2) . . : This check mark requires checking the indoor/outdoor unit periodically, following to the description to maintain the air conditioner properly. (1) The described operations should be performed more frequently if the area of installation is very dusty. (2) These operations must always be performed by qualified personnel. For more detailed information, see the installation part in the manual. Troubleshooting Refer to the following chart if the air conditioner operates abnormally. This may save time and unnecessary expenses. PROBLEM SOLUTION The air conditioner does not work at all. • Check power status and then operate the air conditioner again. • Plug in or switch on the circuit breaker and then operate the air conditioner again. • Check if you have set the Off Timer. Operate the air conditioner again by pressing the Power button. The temperature adjustment is not working. • Check if you have selected Fan/Turbo mode. In these modes, desired temperature is set to auto and you cannot adjust the temperature. Cool/Warm air does not come out of the air conditioner. • Check if the set temperature is higher(during Cool mode)/lower(during Heat mode) than the current temperature. Press the Temp + or - button on the remote controller to change the set temperature. • Check if the Air filter is blocked by dirt. If there is a lot of dust on the Air filter, cooling(heating) performance may decrease. Clean them frequently. • Check if the outdoor unit is covered or installed near the obstacle. Take the cover off and take the obstacle away. • If you want to operate the air conditioner in the sunlight, cover the outdoor unit using curtains or etc. • Check if the air conditioner is operating in De-ice mode. When the ice formed in winter or the outdoor temperature is too low, the air conditioner operates in De-ice mode automatically. In De-ice mode, indoor fan stops and cool air does not come out. • If the doors or windows are open, it may cause bad cooling (heating) performance. Close the doors and windows. • Check if the air conditioner has just been turned on after stopping cooling or heating operation. In this case, just a fan will run to protect the outdoor unit compressor. • Check if the pipe length is too long. When the pipe length exceeds maximum allowable pipe length, cooling (heating) performance may decrease. Air flow adjustment is not working. • Check if you have selected Auto/Dry/ mode. In these modes, desired temperature is set to auto and you cannot adjust the temperature. Fan speed adjustment is not working. • Check if you have selected Auto/Dry/Turbo/ mode. In these mode, fan speed is set to Auto and you cannot adjust the fan speed. Remote controller is not working. • Check if your batteries are depleted. • Make sure nothing is blocking your remote controller sensor. • Check that there are strong lighting apparatus near the air conditioner. Strong light which comes from fluorescent bulbs or neon signs may interrupt the electric waves. Timer function does not set. • Check if you press the Set button on the remote controller after you have set the time. The indicator is blinking continuously. • Press the Power button or disconnect the power plug/switch off the auxiliary power switch. If the indicator is still blinking, contact the service center. Odors permeate in the room during operation. • Check if the appliance is running in a smoky area. Ventilate the room or operate the air conditioner in Fan mode for 1~2 hours. (We do not use smelly components in the air conditioner.) PROBLEM SOLUTION Error is indicated. • When an indoor unit indicator blinks, contact the nearest service center. Noise is generated. • Depending on the status of the air conditioner usage, noise can be heard when refrigerant flow movement changes. It is normal. Smoke is generated from the outdoor unit. • If may not be a fire but it can be a steam generated by the defrost operation from outdoor heat exchanger during Heat mode in winter. Water is dropping from the outdoor unit piping connection. • Water may be generated because of the temperature difference. It is normal. INSTALLATION PARTS . In this manual, you may find model names written in simplified forms as indicated in following table. Model Names Included Models Remark AQ..T.. AQ09T.., AQ12T.., AQ18T.., AQ24T.. Grouping was done by series. AQ..U.. AQ09U.., AQ12U.., AQ18U.., AQ24U.. ..09.. AQ09T.., AQ09U.. Grouping was done by capacity. ..12.. AQ12T.., AQ12U.. ..18.. AQ18T.., AQ18U.. ..24.. AQ24T.., AQ24U.. Safety precautions Carefully follow the precautions listed below because they are essential to guarantee the safety of the equipment. • Always disconnect the air conditioner from the power supply before servicing it or accessing its internal components. • Verify that installation and testing operations are performed by qualified personnel. • Verify that the air condit...
Este manual também é adequado para os modelos :Aparelhos de ar condicionado - AQ09TSBNEUR (4.68 mb)
Aparelhos de ar condicionado - AQ09TSBXEUR (4.68 mb)
Aparelhos de ar condicionado - AQ09UGFN (4.68 mb)
Aparelhos de ar condicionado - AQ09UGFX (4.68 mb)