Assessments - 4, GPA: 3.8
(
)
)
|
Facilidade de uso
The information is correlated with the list in the section “PTY List” on page 24. Note: • If a PTY code of zero is received from a station, “NONE” will be displayed. This indicates that the station has not defined its program contents. • If the signal is too weak for this product to pick up the PTY code, “NO PTY” will be displayed. ■ Frequency The frequency of the current station appears on the display. V m (ti (ti Fi m it) AF Function (AF) The AF (Alternative Frequencies search) function is used to search for other frequencies in the same network as the currently tuned station. It automatically retunes the receiver to another frequency in the network which is broadcasting a stronger signal when there are problems with reception of the currently tuned station or better reception is possible on a different frequency. Note: • AF tunes the receiver only to RDS stations when you use Seek tuning or BSM Auto Memory with the “AF ” indicator ON. • When you recall a preset station, the tuner may update the preset station with a new frequency from the station’s AF list. (This is only available when using presets on the FM2 and FM3 bands.) No preset number appears on the display if the RDS data for the station received differs from that for the originally stored station. • Sound may be temporarily interrupted by another program during an AF frequency search. • When the tuner is tuned to a non-RDS station, the “AF ” indicator flashes. • AF can be switched ON or OFF independently for each FM band. Activating/Deactivating the AF Function AF is set to ON by default. 1. Press the FUNCTION button and select the AF mode (AF) in the Function Menu. 2. Activate or deactivate AF while in an FM band. eSs rf off , “AF” disappears. 8 Using RDS Functions PI Seek Function_ The tuner searches for another frequency broadcasting the same programming. “PI SEEK” appears on the display and the radio volume is muted during a PI Seek. The muting is discontinued after completion of the PI Seek, whether or not the PI seek has succeeded. If the PI Seek is unsuccessful, the tuner returns to the previous frequency. If the tuner fails to locate a suitable alternative frequency or if the broadcasting signal is too weak for proper reception, the PI Seek will automatically start. Auto PI Seek (for preset station) When preset stations cannot be recalled, as when traveling long distances, this product can be set to perform PI Seek also during preset recall. The default setting for Auto PI Seek is OFF. Note: • Refer to “Initial Setting” for details on how to switch Auto PI Seek ON/OFF. Regional Function (REG)_ When AF is used to retune the tuner automatically, REG (regional) limits the selection to stations broadcasting regional programs. Note: • Regional programming and regional networks are organized differently depending on the country (i.e., they may change according to the hour, state or broadcast area). • The preset number may disappear on the display if the tuner tunes in a regional station which differs from the originally set station. • REG can be switched ON or OFF independently for each FM band. Activating/Deactivating the REG Function The REG function is set to ON by default. 1. Press the FUNCTION button and select the REG mode (REG) in the Function Menu. 2. Activate or deactivate REG while in an FM band. PI Seek TA Function (TA) The TA (Traffic Announcement standby) function lets you receive traffic announcements automatically, no matter what source you are listening to. The TA function can be activated for either a TP station (a station that broadcasts traffic information) or an enhanced other network’s TP station (a station carrying information which cross-references TP stations). Activating/Deactivating the TA Function 1. Tune in a TP or enhanced other network’s TP station. The TP indicator “TP” lights when the tuner is tuned to a TP station or an enhanced other network’s TP station. 2. Activate the TA function. “TA” “TP” The TA indicator “TA” lights, indicating that the tuner is waiting for traffic announcements. Repeat the preceding operation when no traffic announcement is being received to deactivate the TA function. Note: • You can also switch the TA Function ON/OFF in the Function Menu. • The system switches back to the original source following traffic announcement reception. • The TA function can be activated from sources other than tuner if the tuner was last set to the FM band but not if it was last set to the MW/LW band. • If the tuner was last set to FM, turning on the TA function lets you operate other tuning functions while listening to sources other than tuner. • Only TP or enhanced other network’s TP stations are tuned in during the Seek Tuning mode when the TA indicator “TA” is ON. • Only TP or enhanced other network’s TP stations are stored by BSM when the TA indicator “TA” is ON. Using RDS Functions Canceling Traffic Announcements • Press the TA button while ...