Assessments - 1, GPA: 4
(
)
)
|
Facilidade de uso
5 THE FI12 ISDN ADAPTER .............................................................................................................. 6 INSTALLATION................................................................................................................................7 TECHNICAL DESCRIPTION ...........................................................................................................9 Page 2of 11 FCT –PL 001 DO/01 Access Audio Ltd GSM FIXED CELLULAR TERMINAL (F151s) The fixed cellular terminal is a GSM terminal to which conventional fixed telephony equipment can be connected in such a way that access to the switched telephone network is established via the GSM network. The F151s units incorporate a standard telephone interface to which any conventional telephone equipment can be connected – just like plugging in the telephone to the traditional fixed analogue network. The units include the best of both worlds, fixed and mobile telephony. As far as the end-customer is concerned, it is simply a telephone plug...with a little extra! Additionally, the F151s can be connected to a PBX. When Low Cost Routing (LCR) is programmed onto the PBX, calls to mobiles made from the desktop will be charged at the prevailing mobile-to-mobile tariff. This could enable the customer to make significant cost savings on their telephone bill. Excellent quality of voice is guaranteed thanks to Enhanced Full Rate CODEC. In addition, the unit’ s intelligence allows it to carry out automatic network searches and can operate on DUAL bands. The possibility of using a safeguard battery should there be a failure in mains power yields maximum telephone network access in any circumstance. These units are adaptable and can be installed anywhere within a building, or wherever the fixed telephone connection is eventually needed. They have been designed to be extremely easy to install in order to keep associated start-up costs to an absolute minimum. As these are GSM terminals, they provide the entire range of subscriber services that the network supports, such as pre-pay subscriptions, Call Line Identification presentation (CLIP) through the a/b line, SMS, Call Waiting, Call Barring, Call Forwarding, Multi- Conferencing or Alternate Line Service. Page 3of 11 FCT –PL 001 DO/01 Access Audio Ltd UNIT DESIGN The F151s is designed for internal installation only. Its size makes installing more than one F151s unit simple, rapid and versatile. The F151s fixed cellular terminals have no keyboards or screens, since their natural user interface is a telephone connected to the unit. All of the functions of the device are operated via this telephone. Two light indicators on the front panel, green and red, supply users with information on the status of the fixed cellular terminal. The level of the incoming signal, AC or battery function and other status information can be obtained via these indicators. The front cover of the unit can be removed, revealing a space inside for inserting a power fail standard lead battery. CONFIGURATION OF KITS F151s terminal kit includes all the required equipment to make installation as easy as possible. F151s TERMINAL KIT consists of: • F151s terminal • Internal antenna • AC/DC adapter • F151s user guide • AC cable • BT type RJ45 phone • Wall installation base socket • Installation material Page 4of 11 FCT –PL 001 DO/01 Access Audio Ltd THE FD10 FAX DATA ADAPTER The FD10 adapter is an external accessory, which is connected to the system connector on the lower part of the F151s terminals. The accessory is designed so that the fixed cellular unit with the adapter attached looks like a single integrated unit. The FD10 can be inserted directly in the fixed cellular unit without having to dismantle it. When users need fax and data services, they simply purchase the unit, insert it in the F151s and it is ready for immediate use. The adapter requires no special skills whatsoever in order to be installed, and therefore installation can be easily done by the end-user. The FD10 basically carries out two functions: 1. It serves as a GSM modem. It provides an RS232 serial port into which a PC can be directly connected for data transmission (file transfers, Internet, etc.). No additional modem needs to be purchased, since the FD10 is a modem itself. 2. It adds extra functions to the F151s units. When the FD10 is inserted in the F151s, G3 faxes can be sent and data reader services (such as credit card readers) can be used by means of the line connector. The FD10 does not supply an additional line connector but instead enhances the functionality of the connector of the equipment to which it is installed. Page 5of 11 FCT –PL 001 DO/01 Access Audio Ltd THE FI12 ISDN ADAPTER The ISDN Adapter is an interface between an ISDN 2B+D output trunk,on a PBX, and up to two F151s units. The ISDN Adapter behaves as an ISDN Network Terminator in a point-to-point configuration and provides 2 speech channels; each B channel is linked t...