Assessments - 3, GPA: 4
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
2 Timbre Type Specific Operation The sound source operation performed for a sound generator instrument receive message may depend on the value of the Timbre Type (see “About the Timbre Type” in “8 Program Change”) of each part’s operation mode. For details, see the explanation for each message. 3 Controlling Send/Receive of MIDI Messages in Each Instrument Part Send and receive of MIDI messages for each instrument part can be controlled by mixer function and global Instrument MIDI settings, Performance MIDI settings, NRPN messages, and Instrument-specific system exclusive messages. See the Instrument’s User’s Guide for details. 4 Conditions that Disable Message Send and Receive No MIDI messages at all can be sent or received while “Please Wait ...” is on the display. 10 Part II Channel Message MIDI Message Send by Assignable Knobs When the Instrument is in the Performance Mode, any control change, after touch, or other MIDI message from CC:00H to CC:65H can be assigned to the assignable knobs, so the MIDI messages are sent by knob operation. For details about the functions that can be assigned, see the User’s Guide. MIDI Message Send by Multi-function Key Any control change, polyphonic key pressure, or other MIDI message from CC:00H to CC:77H can be assigned to the multi-function key, so the MIDI message is sent are sent by key operation. (The Multi-function key is supported by the XW-G1 only.) For details about the functions that can be assigned, see the User’s Guide. MIDI Message Receive by Virtual Controller When the tone is a Solo Synthesizer tone, CC:00HCC: 61H and/or after touch and other effects can be assigned a virtual controller source, which makes it possible to send and receive their MIDI messages. Operation when a message is received is in accordance with the function assigned to the destination of the virtual controller. For details about the functions that can be assigned, see the User’s Guide. Note Off Message Format: 8nH kkH vvH 9nH kkH 00H(receive only) n: MIDI Channel Number kk: Key Number vv: Velocity(Send:40H, Receive:Ignored) Send Sent when the keyboard is played, when play is performed using Auto Accompaniment, and when recorded song data is played back. The key number changes in accordance with on the Transpose function and Octave Shift function. Receive Receipt stops a note being sounded by a note on message. Note On Message Format: 9nH kkH vvH n: MIDI Channel Number kk: Key Number vv: Velocity Send Sent when the keyboard is played, when play is performed using Auto Accompaniment, and when recorded song data is played back. The key number changes in accordance with on the Transpose function and Octave Shift function. Receive Receipt sounds a note of the corresponding instrument part. 11 Control Change Message Format: BnH ccH vvH n: MIDI Channel Number cc: Control Number vv: Value Drawbar Operation by Control Change Message When a drawbar tone is selected on the applicable MIDI channel (n: MIDI Channel Number), control change messages can be used to perform various drawbar parameter operations. (Drawbar tone selection is supported by the XW-P1 only.) Specifically, control change message assignment can be switched as shown below when a non-drawbar tone is selected or when a drawbar tone is selected. Control Change Number Non-drawbar tone selected Drawbar tone selected 46H -Drawbar Position 16’ 47H Filter Resonance Drawbar Position 5 1/3’ 48H Release Time Drawbar Position 8’ 49H Attack Time Drawbar Position 4’ 4AH Filter Cut Off Drawbar Position 2 2/3’ 4BH -Drawbar Position 2’ 4CH Vibrato Rate Drawbar Position 1 3/5’ 4DH Vibrato Depth Drawbar Position 1 1/3’ 4EH Vibrato Delay Drawbar Position 1’ 4FH -Drawbar Organ Type 54H -Drawbar Organ 2nd Percussion 55H -Drawbar Organ 3rd Percussion 56H -Drawbar Organ Percussion Decay Time 57H -Drawbar Organ Key On Click 58H -Drawbar Organ Key Off Click 59H -Vibrato Rate 5AH -Vibrato Depth For details about messages, see each section of this manual that covers them. 7.1 Bank Select (00H,20H) Message Format: BnH 00H mmH (MSB) BnH 20H llH (LSB) n: MIDI Channel Number mm: MSB Value(Note1) ll: LSB Value(Send:00H, Receive:Ignored) Note1 : For details about the relationship between the MSB value and the tone, see the Tone List that comes with the Instrument. Send Sent when tone, performance number, or Step Sequencer number is selected. 12 Receive Receipt causes a change in the tone bank number stored in Instrument memory, but the tone is not actually changed until a Program Change message is received. For details, see “8 Program Change”. The performance number and Step Sequencer number can also be changed by the bank program. For details, see “8 Performance Number/Step Sequencer Number Switching by Bank Select Message and Program Change Message”. For details about performance and the Step Sequencer, see the User’s Guide. 7.2 Modulation (01H) Message Format: BnH 01H vvH n: MIDI Channel Number vv: Value Send Sent when the modulation wheel is operated. Recei...