Assessments - 4, GPA: 3.5
(
)
)
|
Facilidade de uso
Getting Started BATTERY CHARGE lamp Charging begins and the BATTERY CHARGE lamp lights up. The BATTERY CHARGE lamp goes off when charging is complete. This takes about 5 hours maximum. Notes • Please charge the battery where temperature is 0°C to 35°C. • When you strat playback while charging the battery, the lamp goes off and charging is interrupted. (You can still playback with the power from the AC wall outlet.) When you stop playback, the player starts charging the battery again. (You cannot playback if you connected the player to a computer.) to wall outlet to DC IN Battery duration About 11 hours. On the remaining battery indication The battery icon in the display (page 11) changes as shown below low battery please charge the battery Basic Operations Transferring songs from the computer to Network Walkman (Check-out) 1 Install the supplied OpenMG Jukebox software and import digital audio files to OpenMG Jukebox. For details, refer to the OpenMG Jukebox operating instructions. Note Before connecting the player to your computer for the first time, be sure to install "OpenMG Jukebox" software and NW-E7/E10 driver from the supplied CD-ROM to your computer. If you have already installed "OpenMG Jukebox" software, you also need to install NW-E7/E10 driver before connecting the player to your computer. 2 Connect Network Walkman to your computer. 1Attach your Network Walkman to the USB cradle. USB cradle Note Be sure to attach the player to the arrow direction as illustrated below. 3 Connect Network Walkman to your computer. Connect the small connector of the supplied USB cable into the USB jack on the USB cradle, then the large connector to the USB computer. Display Access lamp 2 Connect the AC power adaptor*. Connect the supplied AC power adaptor to an AC wall outlet first, then to the DC IN jack on the USB cradle. * You can use the player by only connecting the dedicated USB cable, but the battery is not be charged. to AC wall outlet jack of your computer. “PC” appears in the display, and the access lamp flashes to confirm access to the USB cable (supplied) to USB cradle AC power adaptor (supplied) to DC IN to Notes • Do not disconnect the USB cable or remove the player from the USB cradle during the access lamp is flashing. This may cause the data being transferred to be broken. • Do not connect more than two USB devices to your computer. Normal operation will not be guaranteed. • Use of this player with a USB hub or a USB extension cable is not guaranteed. • A malfunction may occur depending on the USB devices connected at any one time. • When connecting Network Walkman to your computer for the first time, the USB driver Installer window appears. Please follow the instructions in the Installer window. • You cannot operate the player while it is connected to a computer. If you place the player on the USB cradle connected to a computer during playback, playback stops and "PC" appears on the display. • Even if you connect the player to a computer, it is impossible to browse the contents of the built-in memory of the player using the Windows Explorer. 3 Transfer the music file to Network Walkman (Check-out). For details on how to operate, refer to the OpenMG Jukebox Operating Instructions. Tip To transfer the song back to the computer (check-in), refer to the OpenMG Jukebox software instruction manual or the online help. Note on playing back time-limited music (timeout contents) Some music data distributed via the Internet (EMD service) have playback time restriction. When you playback a song with playback time restriction, the timeout icon (page 11) goes on. If you try to playback a song whose playback period is already expired, the timeout icon flashes and playback of the next song begins. We recommended you to check-in or delete the expired song in the player to the computer using the OpenMG Jukebox software. OpenMG Jukebox will not playback the expired song and the expired song will not be available for check-out to Network Walkman. Delete these songs as needed. Basic Operations Listening to music with Network Walkman Please charge the battery before use (see page 7). Note When using Network Walkman, be sure to disconnect it from the computer. 1 Connect the headphones/earphones. 2 Start playback. 1 Push the jog lever. 2 Press the VOLUME +/– button up or down to adjust the volume. HOLD switch to i jack Playback stops automatically when the music reaches the end (only when the REPEAT mode is off). If playback does not start The HOLD switch may be switched on. Please release it off (page 13). To stop playback Push the jog lever. Tip If you do not operate the player for 3 seconds while in stop mode, the display automatically turns off. (rear) On other operations On the display 5 Basic OperationsTo Operation of the Jog lever Slide downwards Jog lever Slide upwards Push 4321BASS12 1 SHUF VOL Go to the beginning Slide upwards once. of the next track Go to the beginning Slide upwards of the succeding and hold st...
Este manual também é adequado para os modelos :Jogadores - NW-E7 (357.22 kb)