Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
• Enzymes provide a particularly effective action at temperatures around 50°C, and as a result detergents containing enzymes can be used in conjunction with low-temperature wash cycles in order to achieve the same results as a normal 65°C wash cycle. • To avoid wasting detergent, use the product in appropriate quantities based on the manufacturer’s recommendations, the hardness of the water and the soil level and quantity of the crockery. Even if they are biodegradable, detergents contain substances that may alter the balance of nature. Recycling & Disposal Informatio. As part of Hotpoint's continued commitment to helping the environment, Hotpoint reserves the right to use quality recycled components to keep down customer costs and minimise material wastage. Please dispose of packaging and old appliances carefully. To minimise risk of injury to children, remove the door, plug and cut mains cable off flush with the appliance. Dispose of these parts separately to ensure that the appliance can no longer be plugged into a mains socket and the door cannot be locked shut. Only available in selected models. Troubleshootin. Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance (see Assistance). Some problems are indicated by specific codes that flash on the display: make a note of any codes displayed EN before calling Assistance. Malfunction. The dishwasher does not start. No water enters the dishwasher. No water drains out from th. dishwasher. The dishwasher makes excessiv. noise. The dishes and glasses are covere. in a white film or limescal. deposits. The dishes and glasses ar. streaked or have a bluish tinge. The crockery has not been drie. properly. The dishes are not clean. Shut off tap alarm. (you will hear several short beeps) (the code AO6 flashes on the display). Blocked filter alar. (the code AO5 flashes on the display). Water loading solenoid valv. malfunction alar. (the code AO1 flashes on the display). Possible causes / Solutions. • The plug has not been inserted into the electrical socket properly, or there is no power in the house. • The dishwasher door has not been shut properly. • A delayed start has been programmed (see Start-up and use). • There is no water in the mains supply. • The water inlet hose is bent (see Installation). • The dishwasher cycle has not yet finished. • The water outlet hose is bent (see Installation). • The drain duct is blocked. • The filter is clogged up with food residues. • The dishes are rattling against each other or against the sprayer arms. • The level of the refined salt is low or the dosage setting is not suited to the hardness of the water (see Rinse aid and salt). • The lid on the salt dispenser is not closed properly. • The rinse aid has been used up or the dosage is too low. • The crockery is made from non-stick material. • The rinse aid dosage is too high. • The rinse aid has been used up or the dosage is too low (see Rinse aid and salt). • The rinse aid dispenser setting is not high enough. • A wash cycle without a drying programme has been selected. • The racks are overloaded (see Loading the racks). • The crockery has not been arranged well. • The sprayer arms cannot move freely. • The wash cycle is too gentle (see Wash cycles). • The detergent has not been measured out correctly or it is not suited to the type of wash cycle (see Start-up and use). • The filter is dirty or blocked (see Care and maintenance). • The refined salt level is low (see Rinse aid and salt). • Turn on the tap and the appliance will start after a few minutes. • The appliance lock has been activated because nothing was done when the beeps sounded. Switch off the machine using the ONOFF button, turn on the tap and switch the machine back on after 20 seconds by pressing the same button. Re-programme the machine and restart the wash cycle. • Switch off the machine by pressing the ON-OFF button and clean the filters (see Maintenance), then switch the dishwasher back on by pressing the same button. Re-programme the machine and restart the wash cycle. • Switch off the appliance by pressing the ON-OFF button and switch it back on after a minute. If the alarm continues, turn off the water tap to reduce the risk of flooding, remove the plug from the electrical socket and call Assistance. Information for test lab. EN Load for 12 Standard Settings test. lower baske. CBADC1C9A4C1 upper basket (at top position. ifkeeeghg 5561. . Loading the Baske. 78 64 5123 • This basket is equipped with two removable grids: insert the cutlery one by one into the slots, with the handles at the that they don't touch. • Position them so 1 1 1 1 1 1 1 1 1 1 1 1 3 3 3 3 3 3 8 3 7 4 4 4 4 4 4 7 6 4 4 4 4 4 4 2 2 2 2 2 2 3 55 5 55 5 55 5 5 5 53 2 2 2 2 2 2 3 3 3 bottom. Lower basket Upper basket Type Item Diameter Volum (approximately) Type Item Diameter/Volum (approximately) A soupe plate 23 cm. e cup 0,20 l. B dinner plate 26 cm. f serving bowl 19 cm. C desse...
Este manual também é adequado para os modelos :Máquinas de lavar louça - FDW 75 (731.77 kb)