y y When transporting the TV by hand, hold the TV as shown in the following illustration. y y When transporting the TV, do not expose the TV to jolts or excessive vibration. y y When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right. Mounting on a table 1 Lift and tilt the TV into its upright position on a table. - - Leave a 10 cm (minimum) space from the wall for proper ventilation. 10 cm 10 cm 10 cm 10 cm 2 Connect the power cord to a wall outlet. CAUTION y y Do not place the TV near or on sources of heat, as this may result in fire or other damage. 18 EENNGGLISH ASSEMBLING AND PREPARING Securing the TV to a table Fix the TV to a table to prevent from tilting forward, damage, and potential injury. (Only 32/37LM611*, 32/42/47LM580*, 32/42LM34**, 32/37/42/47LS56**) To secure the TV to a table, insert and tighten the supplied screw on the rear of the stand. (Only 32LM585*) 1 Connect the Desk-mount Cables to the Stand Base using the Bracket Screws. 2 Fix the Desk-mount Cables to a table using the Desk-mount Screws. 3 Once the TV is fixed, move the table close to the wall. Children may go in, causing injuries. M4 x 8 2EA WARNING y y To prevent TV from falling over, the TV should be securely attached to the floor/ wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury. Adjusting the angle of the TV to suit view (Only 32/37LM611*, 32/42/47LM580*, 32/42LM340*, 32/37/42/47LS56**, 47CM96**) Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. 20° 20° (Only 42/47/55LM615*, 32/42/47LM585*) Swivel 10 degrees to the left or right and adjust the angle of the TV to suit your view. 10° 10° CAUTION y y When adjusting the angle of the product, watch out for your fingers. - - Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury. (Only 42/47/55LM615*, 32/42/47LM585*) 19 EENNGGLISH ASSEMBLING AND PREPARING Securing the TV to a wall (This feature is not available for all models.) 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. - - If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV. 3 Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface. CAUTION y y Make sure that children do not climb on or hang on the TV. NOTE y y Use a platform or cabinet that is strong and large enough to support the TV securely. y y Brackets, bolts and ropes are not provided. You can obtain additional accessories from your local dealer. Using the Kensington security system (This feature is not available for all models.) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit . Connect the Kensington security system cable between the TV and a table. Mounting on a wall Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. 10 cm 10 cm 10 cm 10 cm 20 EENNGGLISH ASSEMBLING AND PREPARING A B CAUTION y y Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur. y y If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. y y Do not over tighten the screws as this may cause damage to the TV and void your warranty. y y Use the screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. NOTE y y Use the screws that are listed on the VESA standard screw specifications. y y The wall mount kit includes an installation manual and necessary parts. y y The wall mount bracket is not provided. You can obtain additional accessories from your local dealer. y y The length of screws may differ depending on the wall mount. Make sure to use the proper length. y y For more information, refer to ...
)
