Equipped with an automatic knife sharpening system, the XD-EU5 uses the newest and most advanced technology to ensure the finest cutting quality. The use of a die cast housing ensures lightweight and easy operation, while the safety mechanisms assure the proper protection is provided for the operator. BEST USED FOR Light to medium weight fabrics Woven and knit fabric FEATURES • Automatic sharpening system • Low-profile ergonomic design • Powerfull 1” stroke OPTIONS Specify U-ground or t

An extra thin base plate and light die cast design make the XD-100 a pleasure to operate. BEST USED FOR Light to medium weight fabrics Woven or loosely knit fabric FEATURES • Octagonal cutting blade • Built-in sharpening mechanism • Extra-thin base plate • High-power electric motor • Carbide-tipped counter blade • Extra blade, stone, grease, motor brush and key to remove blade supplied OPTIONS Extra blades (#S135) and sharpening stones (#S150)

NOTE: The red Thermostat Light will continue to on during use as the Iron maintains 7. Press the Steam Button willbe released continuously position. 6 NOTE: Steam can be stopped by holding the Iron in the vertical position, or by pressing the Steam Button back into theNO STEAM position. CAUTION: AVOID COMING IN CONTACT WITH ESCAPING STEAM. 8. When finished ironing, press the Steam Button into the NOSTEAM position, turn the Temperature Control Dial to the“MIN” setting, and unplug the Iron. If nec

. .. . .. i iif ff i iit tt’ ’’ s ss W WWe ees sst tti iin nng ggh hho oou uus sse ee IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Use iron only for its intended use. 3. To protect against a risk of electric shock, do not immerse the iron in wateror other liquids. 4. The iron should always be turned to the “MIN” setting before plugging orunplugging from outlet. Never yank cord to d

the Iron back in the vertical position (on its Heel completely before cleaning or storing. NOTE: The Water Tank should be emptied after each use. Blast of Steam The Blast of Steam Button releases a penetrating blast of steam wrinkles and to iron faster. 1. When using the Blast of Steam feature, the Temperature Control Dial must be positioned to at least the “ ” symbol -- located midway between the GREEN (• •) and LILAC (• • •) settings. For best results, use the “max” (RED) temperature and keep

Read all instructions. 2. Use iron only for its intended use. 3. To protect against a risk of electric shock, other liquids. 4. The Iron should always be turned to “min” position from outlet. Never yank cord to disconnect from pull to disconnect. 5. Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Loop cord loosely around iron when storing. 6. Always disconnect iron from electrical outlet when filling with water and when not in use. 7. Do not operate iron wi

Read all instructions. 2. Use iron only for its intended use. 3. To protect against a risk of electric shock, other liquids. 4. The Iron should always be turned to “min” position from outlet. Never yank cord to disconnect from pull to disconnect. 5. Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Loop cord loosely around iron when storing. 6. Always disconnect iron from electrical outlet when filling with water and when not in use. 7. Do not operate iron wi

Read all instructions. 2. Use iron only for its intended use. 3. To protect against a risk of electric shock, do not immerse the iron in water or other liquids. 4. The iron should always be turned to off before plugging or unplugging from outlet. Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect. 5. Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Loop cord loosely around iron when storing. 6. Always disconnect iron from e