Log:
Assessments - 3, GPA: 3.7 ( )

Instruções de Operação Emerson, Modelo iP500

Fabricante : Emerson
Arquivo Tamanho: 1006.01 kb
Arquivo Nome : 43a09c56-3cb2-afe4-85f5-2926f7f7eb1f.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


6.) Press the Volume + or Volume – buttons to select the desired wake up mode: BUZ (Buzzer), RAD (Radio), or iPod. 7.) After 10 seconds the alarm display will stop flashing and the correct time display reappears. 35 iP500_042307.p65 35 23/4/2007, 17:01 To Activate or Deactivate The Alarm Press the Alarm On/Off button once on the top panel, or on the remote control, to activate the alarm. One of the alarm mode icons will appear in the time display to confirm that the alarm is ‘On’. Press the Alarm On/Off button again to deactivate the alarm. The alarm icon disappears. Wake-up To Radio 1.) Turn the radio ‘On’, select the station that you wish to hear at the wake-up time, and turn the radio ‘Off’ again. 2.) Check and adjust the alarm time setting if necessary and make sure the “ RAD” alarm mode is selected. 3.) Press the Alarm On/Off button to activate the alarm. Make sure the “ RAD” icon appears in the display. 4.) At the selected wake up time the radio will turn on automatically. It starts softly and gradually gets louder. It will continue to play for 60 minutes and then shut off automatically until the following day. 5.) To stop the radio alarm sooner, press the Alarm On/Off button once. The radio stops immediately but the “ RAD” indicator remains in the display and the alarm remains set for the following day. To deactivate the alarm completely press the Alarm On/Off button once more. The “ RAD” indicator disappears. 36 iP500_042307.p65 36 23/4/2007, 17:01 Wake-up To iPod® NOTES: • You cannot wake-up to an iPod® Shuffle connected to the USB port. You can only wake-up to ‘dockable’ iPod® models that are connected to the 30-pin connector in the docking area. • If you select the “Wake-up To iPod® ” mode but there is no iPod® connected to the dock at the wake-up time, the system will automatically default to the “Wake-up to Buzzer” mode. 1.) Make sure that the iPod® is properly inserted in the docking area and that the HOLD switch on the iPod® is ‘Off’. 2.) Check and adjust the alarm time setting if necessary and make sure the “ iPod” alarm mode is selected. 3.) Press the Alarm On/Off button to activate the alarm. Make sure the “ iPod” icon appears in the display. 4.) At the selected wake up time the iPod® will turn on automatically. It starts softly and gradually gets louder. It will continue to play for 60 minutes and then shut off automatically until the following day. 5.) To stop the iPod alarm sooner, press the Alarm On/Off button once. The iPod® stops immediately but the “ iPod” indicator remains in the display and alarm remains set for the following day. To deactivate the alarm completely press the Alarm On/Off button once more. The “ iPod” indicator disappears. 37 iP500_042307.p65 37 23/4/2007, 17:01 Wake-up To Buzzer With Auto Snooze Function 1.) Check and adjust the alarm time setting if necessary and make sure the “BUZ ” alarm mode is selected. 2.) Press the Alarm On/Off button to activate the alarm. Make sure the “BUZ ” icon appears in the display. 3.) At the selected wake up time the Buzzer will turn on automatically. It continues for 1 minute and then enters the “Auto Snooze” mode. After one minute the buzzer will shut off for 9-10 minutes and then turn on again automatically. This “Buzzer/Auto Snooze” cycle will be repeated three more times, but after the fourth time the alarm will shut off and reset itself for the following day. 4.) To stop the buzzer alarm sooner, press the Alarm On/Off button once. The buzzer stops immediately but the “BUZ ” indicator remains in the display and alarm remains set for the following day. To deactivate the alarm completely, press the Alarm On/Off button once more. The “BUZ ” indicator disappears. Snooze Operation If you need a few minutes extra sleep when the Radio or iPod alarm turns on in the morning, press the Snooze/Light button. The alarm will stop for 9-10 minutes and then turn on again. The Snooze operation may be repeated 3 times but after the 4th time the alarm will not repeat. It will shut off and reset itself for the following day. The buzzer alarm automatically enters the “Auto Snooze” mode after one minute as mentioned above. However you may still use the manual snooze mode for the buzzer alarm by simply pressing the Snooze/Light button as soon as the buzzer alarm turns on. 38 iP500_042307.p65 38 23/4/2007, 17:01 Sleep To Music Timer This feature allows you to fall asleep to the Radio, or your iPod®, for up to 60 minutes, and then the system shuts off automatically. 1.) Turn the system on and select the music source that you want to play as you are falling asleep. Tune to the desired radio station, load and start your iPod® and select the desired album, or artist, or genre, etc. 2.) Adjust the Volume level as desired. 3.) Press the Sleep button 1, 2, 3, or 4 times to select 15, 30, 45, or 60 minutes of sleep timer operation. The SLEEP indicator and the amount of sleep time appear in the display. After 10 seconds the time display disappears and only th...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias