Assessments - 2, GPA: 4.5
(
)
)
|
Facilidade de uso
When this distance decreases, replace the batteries with new ones. Using the shared buttons The remote control is designed to operate both of the CD decks of the unit. Some buttons are dedicated to one specific CD deck, while others are shared between the two decks. To use shared buttons , t, PRGM, PRGM CHECK, RANDOM, REPEAT, A B and numbered, first press either CD/SEL to control the play deck or CD-R/RW/SEL to control the record deck. When CD/SEL or CD-R/RW/SEL is pressed, "CDP" or "CDR" will appear on the appropriate information display to confirm the selection. r REPEAT ca B ,tf,gs NOTE • If the remote control is not going to be used for an extended period of time, remove the batteries to prevent possible electrolyte leakage. • The remote control may not operate correctly when: -The line of sight between the remote control and the remote sensor (located on the front panel) is exposed to intense light, such as direct sunlight -Other remote controls are used nearby (television, etc.) CD-R/RW/SEL PRGM CD/SEL RANDOM 0-9,+10 PRGM CHECK A r En ENGLISH 5 GENERAL GUIDE GENERAL GUIDE FRONT PANEL CONTROLS 123... : For CD Play Deck (CD) 123... : For CD Record Deck (CD-R/RW) 123... : For both Decks (CD and CD-R/RW) _12345680@#79!/.,;]'\[=-(&^%$)* 1 POWER $zOPEN/CLOSE Press to turn on the power. Press to open the record deck. Press again to close 2 PHONES the deck. Connect headphones with a standard stereo type %t/gSKIP/SEARCH plug. Press and hold to play the disc in fast-forward mode. 3 PHONE LEVEL Press to move to the next track. Turn to adjust the headphones volume level. ^f/rSKIP/SEARCH 4 DIGITAL IN (OPTICAL) Use to connect a portable digital audio player to Press and hold to play in fast-reverse mode. Press to move to the previous track. this unit for digital recording. &aPAUSE 5 Play deck Press to pause or restart the disc. Use to play CD, CD-R or CD-RW discs that have *INPUT been finalized. Press to select the input source for recording. 6wRECORD (sSTOP Press to begin recording. Press to stop the CD in the record deck. 7ERASE )DISPLAY Press to erase one or more tracks of an unfinalized Press to cycle through the time display options for CD-RW disc. the record deck. 8CD SYNC -cPLAY/SELECT Press to begin sync recording of a single track or Press to play a CD or to set a selection in the record an entire disc from an external CD, MD, DAT player. deck. 9FINALIZE = Information display Press to finalize the recording process. Displays the status of this unit. 0 DUBBING [ DISPLAY Press to make a complete copy of the disc to a CD-Press to cycle through the time display options for R or CD-RW. the play deck. ! SPEED ] aPAUSE Press to select the recording speed for internal Press to pause or restart the disc. dubbings. \ DUAL @REC LEVEL Press to enable both CD decks to playback at the Use to control input level when making recordings same time and function separately. in analog mode. ; sSTOP #Record deck Press to stop the CD in the play deck. Use to playback CD and record CD-R and CD-RW discs. ' REMOTE SENSOR Receives commands from the remote control. 6 ENGLISH , cPLAY / f/rSKIP/SEARCH Press to play a CD in the play deck. Press and hold to play in fast-reverse mode. Press . t/gSKIP/SEARCH to move to the previous track. Press and hold to play the disc in fast-forward mode. _ zOPEN/CLOSE Press to move to the next track. Press to open the play deck. Press again to close the deck. INFORMATION DISPLAY [-)(*&\13680%^;245791!@3#68$\];-)(*&=[ 11RANDOM Lights when random playback has been programmed for one of the CD decks. 2 COAXIAL Lights when signal from coaxial jacks is selected as the source. 33 PROG Lights when one of the CD decks is being programmed for playback options. 4OPTICAL Lights when signal from optical jack (on the front panel or rear panel) is selected as the source. 5ANALOG Lights when signal from analog jacks is selected as source. 66 REPEAT Lights when a repeat function is being used. 7COPY PROHIBIT Lights when a recording is not possible due to the Serial Copy Management System (SCMS). 881 A-B ALL Displays the type of repeat function being used. 9AUTO Lights when the automatic method of incrementing tracks is selected for a recording session. 0 DUAL Lights when the unit is playing in dual mode. !ERASE Lights when a CD-RW disc is being erased. @FINALIZE Lights when the unit is in the Finalization process. #RECORD Lights when making a recording and flashes while preparing to make a recording. $SYNC Lights when the unit has been programmed for a CD sync recording. % DUBBING Lights when a dubbing is in progress between the two CD decks. ^ X2 X4 Indicates which speed has been selected for dubbing recordings. &&TIME Lights in conjunction with one of the time indicators TRACK, TOTAL, REMAIN, to show which of the time status mode is active. **REMAIN Lights when the information display shows the time remaining on a disc. (( Status display Displays the disc playing time and messages about the discs recordings. )) TOTA...