Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
MP3, CD player & etc.) to REPEAT ALL mode after turning off the unit. 2. If you want to wake to a specific song, please select it on your iPod shuffle or external Player and select REPEAT ONE mode instead. 3. When selecting the AUX as the wake to setting and using a battery-powered external player as the source, you will need to make sure there is sufficient power to run the player beyond the desired wake-up/alarm time. We strongly recommend using an AC adaptor wherever possible. BASS BOOST Operation - Press “BB” button to turn on / off bass boost effect. Note: Bass boost effect is available in all function modes. It can be switched ON/OFF by the remote BB button. REMOTE CONTROL To use the remote control, please ensure the remote control battery CR2025 (included) is installed properly. Replace the remote control battery when it stops working. It is highly recommended to use a good quality DC3V Lithium cell. - POWER ON/OFF button: Press to switch on or off your unit. -MUTE button Press to cut off the output sound immediately. - PLAY/PAUSE button: Start/pause the music playback. Press and hold to stop your iPod and return it to sleep mode. -SKIP ( and ) buttons: Press to change to your favorite song. Press and hold to search the desired music passage. - SLEEP button: Press to set the sleep timer. -Radio Memory Channel button +/- buttons: Press to select your saved radio memory channel. - Bass Boost button: Press to switch Bass Boost effect ON/OFF. - Volume +/- buttons: To adjust the volume to desired level. -FUNCTION button: Press to select the function mode. -SNOOZE button: Press to suspend sounding alarm sound for 10 minutes. Note: -Room lighting and battery life can affect the operating range of the remote control. - To ensure the Infrared remote control works as expected, your iPod must have the proper or latest iPod software installed. -The remote control works even when the iPod is locked. CARE AND MAINTENANCE -Do not subject the unit to excessive force, shock, dust or extreme temperature. -Do not tamper the internal components of the unit. - Clean the unit with a damp (never wet) cloth except metal contact or speaker grille. Solvent or - detergent should never be used. -Avoid leaving your unit in direct sunlight or in hot, humid or dusty places. -Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors. -Always keep your finger dry and clean before touching all the buttons. -Do not dispose of batteries in fire, batteries may explode or leak. 8 TROUBLESHOOTING GUIDE TROUBLESHOOTING GUIDE SYMPTOM POSSIBLE PROBLEM SOLUTION This unit does not turn on. AC-DC adaptor is not plugged into a wall outlet or the connector is not plugged into the DC jack on the back of the unit. Plug the AC adaptor into a wall outlet and plug the connector into the supply jack on the unit. Wall outlet is not functioning. Plug another device into the same outlet to confirm the outlet is working. iPod does not respond to the unit. Using no / wrong iPod adaptor. Make sure the dock adaptor is the proper fit for your iPod. iPod does not dock properly. Remove your iPod from the dock and check for any obstruction on the connector in the dock and on your iPod. Then return it onto the dock. iPod does not charge up. iPod is not docked properly. Remove your iPod from the dock and check for any obstruction on the connector in the dock and on your iPod. Then return it onto the dock. Problem with the iPod battery. Please make sure that your iPod is working properly before docking into the unit. Please refer to your iPod manual for details. No sound from AUX input source. 3.5mm headphone cable is not connected properly. Check the connection and make sure the cable is inserted firmly into those jacks. Sound is distorted. Volume is set too high. Decrease the volume of the unit to fit your preference. Sound source is distorted. If you are using an external sound source like older generation of iPod, try reducing the output volume on the device itself. Also, try turning bass boost OFF or change EQ setting. Remote control is not functioning properly. Low battery. Replace the battery with correct type CR2025. The unit functions or displays abnormally. The unit or display may be af fected by the high electrostatic discharge. Press the RESET button on the back of the main unit. Low battery indicator in the display is flashing. Main battery power is getting weak. Replace all batteries in the main battery compartment with 4 good quality ‘AA’ (UM-3) alkaline batteries. 9 SPECIFICATIONSSPECIFICATIONS AC Adaptor: Input: 120V~60Hz Output: 7.5V 1.5A Battery: 4 x DC1.5V “AA”(UM-3) Batteries Output Power: 2 X 2W(RMS), 4ohms Remote Control Battery: 1 x DC3V Lithium Battery (Type CR2025) FM Frequency Range: 87 -108 MHz The specification and external appearance of the set are subjected to change without prior notice. “Made for iPod” means that an electronic accessory has been designed to connect specifically to...