Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
standard. Carefully read the rating label located on the power adapter. If the locally available power is outside of the specified range for the adapter, plugging the adapter in could result in failure and possibly fire. • Do not expose this product to temperatures above 95 degrees F (35 degrees C). • Do not leave the unit in direct sunlight for long periods of time. • Do not place the unit on or near a heater. • Do not block air circulation around the unit. • Protect the unit from dust, moisture and water. • Clean the unit only with a damp cloth and mild soap. Do not use solvents or other cleaning products. • There are no user serviceable parts inside. Refer all repairs to a qualified repair facility. • At the end of the useful life of the product, remove batteries before discarding. Many locales prohibit disposing of electronic devices or batteries in the trash. Please be responsible, and follow all applicable local regulations when disposing of this or other electronic devices. Getting Started Thank you for purchasing the KE-8 system for your iPod. Designed specifically to work with your docking iPod, this system provides high quality audio and performance that brings out the best in your music. The KE-8 can be powered by the supplied adapter or by four “AA” batteries. NOTE: When operating on battery power, the KE-8 will NOT charge your iPod. When operating on adapter power the KE-8 WILL charge docking iPods with the exception of the “iPod Shuffle and 3rd Generation iPods”. Batteries should be installed in the KE-8 only when portable operation is anticipated. Batteries should not be left in the KE-8 long term. When batteries are installed and the adapter is available, the KE-8 will take its power from the adapter. The KE-8 uses highly efficient class D amplification and switch mode voltage regulation for exceptional sound quality and long battery life. At moderate volume, four fresh “AA” alkaline cells will provide approximately 8 hours of operation. Rechargeable “AA” batteries can be used in the KE-8; however, the KE-8 will NOT charge them. Different battery chemistries have different charging requirements. Always use the correct charger for the batteries that you have. Install or replace the batteries: • Open the KE-8 by pressing on the friction latch and swinging the speakers outward. Remove the two battery compartment covers located on the top of the unit. • Insert four “AA” cells as shown in the illustration below. Follow the polarity marks inside the battery area. • Never mix fresh and used batteries. Always replace all four batteries with fresh ones. 4x’AA’ Batteries Controls and Indicators 1. Open Speaker 2. Speaker 3. iPod Dock 4. Power On/Off 5. AC Adapter Jack 6. Volume Up/Down 7. Line-in Jack 8. Power LED 9. Battery Compartment 10. AC Adapter 11. Line-in Cord Using the KE-8 To open the KE-8, grip the unit as shown. Press outward with the right hand and pull in with the left. Simultaneously, swing the speakers open and into the operating position. If you are not using battery power, connect the adapter (10) to the power jack (5) and plug the adapter into a power outlet. Turn on the power switch (4). Notice that the blue light (8) comes on. Use your thumbnail to grip the underside of the iPod dock tray. Move it forward to the stop. Mount your iPod on the KE-8 and initiate play using the controls on the iPod. Increase the volume to the desired level by pressing the top portion of the volume control (6). To turn the KE-8 off, slide the power switch (4) to the off position. Remember to turn off your iPod or any device connected to the line-in jack (7). Charging your iPod Note: Docking iPods will only be charged when the KE-8 is powered from the AC Adapter. (Except iPod Shuffle and 3rd Generation iPod) Using the KE-8 with non-docking devices The KE-8 can be used with any device that has a headphone output. Use the supplied interconnect cord (11) to connect the “Line in” jack (7) to the headphone output of the source that you wish to listen to through the KE-8. Suitable sources are small TVs, laptop computers, generic MP3 players, nondocking iPods, portable CD players, and headphone radios. Troubleshooting Symptom Possible Problem Solution No sound from the KE-8 No power to the system Source turned off or muted Power switch not in the on position. Power adapter not plugged into the back of the KE-8. Power adapter not plugged into the wall outlet. Wall outlet not switched on. Test this by plugging a working lamp into the outlet. Bad or no batteries installed Check that source is on and playing. Low volume Volume misadjusted or inadequate recording level. Weak or dead batteries Press the top of the volume button (6) to increase the volume. Redo the recording with higher level. If connected to a non-docking source, turn up the source’s volume. Replace the batteries Distorted sound Weak or dead batteries Original recording may be distorted Battery in so...