Assessments - 3, GPA: 3
(
)
)
|
Facilidade de uso
Installation 6 Connecting to your iPod iPod connector Insert appropriate iPod adaptor for Dock your iPod here your iPod here Remote Control receiver 1. USB 2. DC In 3. Audio Connection 4. S-Video Connecting the dock and i-X6 Speakers 1. Connect the dock to the speakers using the included 5 metre Audio (3) and DC (2) cable to connect the audio and provide power to charge your iPod. 2. For viewing video footage, connect the S-video cable to the dock (4) and into your television. This requires an iPod with video capabilities. Make sure video output is set to on & settings on your iPod are correct. ie. PAL or NTSC. 3. To sync your iPod with your computer, connect the included USB cable from the dock (1) to your computer. Your iTunes should automatically start after a short while and sync with your iPod. 4. Once you have connected the cables to the rear of the dock, slot in the appropriate insert for your iPod. Then dock your iPod on the iPod connector To take full advantage of the stereo sound, we recommend you place the dock close to the centre of your entertainment system and separate the speakers. 5. To adjust the volume via the dock press the (+) or (-) buttons on the front of the dock or on the remote. Operation 7 BACKLIGHT REPEAT VOL UP VOL DOWN MENU ENTER MENU PLAY/PAUSE REW/PREVIOUS FF/NEXT MUTE SHUFFLE Operating the Speaker System via remote control Remote Control Features . Backlight: Your iPod’s backlight is switched on for 30 seconds . Mute: Changes between mute and mute off. . Repeat: Changes your iPod’s repeat status. repeat off ==> repeat one track ==> repeat all tracks==>repeat off . VolUp: Volume up . Shuffle: Changes your iPod’s shuffle status. Shuffle off ==> shuffle tracks ==> shuffle albums ==> shuffle off . Rew/Previous: Play previous track. Press and hold to scan backwards through the track. . Play/Pause: When your iPod’s power is on, changes play status between play or pause. When iPod’s power is on, press and hold for 2 seconds to turn off iPod. When your iPod’s power is off, press to turn on iPod. . FF/Next: Play next track. Press and hold to scan forward through the track. . Menu: Works as your iPod’s Menu button . VolDown: Volume down . Menu Up: Works as your iPod’s Menu Up button . Enter: Works as your iPod’s Enter button . Menu Down: Works as your iPod’s Menu Down button Specifications 8 Type: Two-way Powered Speaker System LF Driver: Woofer: 6.5" magnetically shielded paper cone HF Driver: Tweeter: 1" magnetically shielded natural silk Frequency Response: 45Hz-22KHz Crossover Frequency: 3.0KHz S/N Ratio: >95dB (typical, A-weighted) Power: 100 watts Dynamic Power: 20 watts RMS 4 ? per channel @0.5% THD+N Input Impedance: 10K Ohms Unbalanced Polarity: Positive signal at “+” input produces outward low-frequency cone displacement Input Sensitivity: 100 mV pink noise input produces 95dBA output SPL at 1 meter with volume control at maximum Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter Indicator: Power on/off indicator on rear panel Input Connectors: 2 RCA Inputs Aux Inputs Power Requirements: 100-120V/60Hz & 220-240V/50Hz AC Select Dimension: 300mm(H) x 198.5mm(W) x 250mm(D) Weight: 11.82kg Finish: High Gloss Enamel Colour: Black CYGNETT HEAD OFFICE BUILDING 6/650 CHURCH STREET RICHMOND VICTORIA AUSTRALIA 3121 DESIGNED & DEVELOPED IN AUSTRALIA MADE IN CHINA CYGNETT UNISON PRODUCT CODE: U S IX6B website: unison.com e mail: info@cygnett unison.com For help or technical support, please emil: info@cygnett-unison.com iPod is a trademark of Apple, Inc., registered in the U.S. and other countries. ...
Este manual também é adequado para os modelos :Speakers - i-x6 (242.89 kb)
Speakers - i-x6 (242.89 kb)