Assessments - 4, GPA: 5
(
)
)
|
Facilidade de uso
The included wall- mount brackets make installation easy, and MagnaGuard® magnetic shielding allows placement next to a television or computer monitor. How to Wire Your Speakers You need to wire your speakers correctly to obtain the best sound quality and the proper image. Wiring should just take a few minutes, but it’s important to do it carefully, since incorrect wiring (such as reversed connections) can result in a poor soundstage or poor bass. We recommend using 18-gauge or larger speaker wire for runs up to 25 feet (8m), and thicker 16-gauge or larger for longer runs. Strip 1.2" (12mm) of insulation off the ends of each speaker cable to expose the two conductors and tightly twist the wire strands. Maintain consistency of the + (red) and – (black) connections by using the markings on the wire. IMPORTANT: Typically, one side of the wire is smooth. Connect this side to the – (black) connection. The other side has a rib or stripe. Connect this to the + (red) connection. Using the five-way binding posts: The binding posts permit easy connection to banana plugs, pins, spade lugs, and bare wire. The metal surfaces are plated with 24K gold to prevent corrosion. Insert the wire in the hole and tighten. Connections WARNING: To prevent electrical shock, always switch off the amplifier or receiver when making connections to the speaker. Micro90c II Center Channel Connections Connect the speaker’s terminals to the center channel terminals on the amplifier or receiver. Maintain consistency of the + (red) and – (black) connections by using the markings on the wire. Micro90x II and Micro80x II Satellite Connections Connect the satellites to the amplifier or receiver terminals designated for surround or rear channel effects. Usually, these will be labeled as “Left Rear” and “Right Rear.” Maintain consistency of the + (red) and – (black) connections by using the markings on the wire. Placement Micro90c II Center Channel Placement Place the Micro90c II as close to the TV monitor as possible, with its front panel flush with the front of the television. Self-adhesive rubber feet are included with the Micro90c II to protect the TV’s finish and prevent vibration. Micro90x II and Micro80x II Satellite Placement Micro90c Rear channel Center channel Left Right Receiver or amplifier Left Micro satellite Right Micro satellite IMPORTANT: Be sure to hook + to +, – to –. Place the surround satellite beside or behind the listeners Center channel flush with front of TV 5–9 ft. (1.5–3m) For the most realistic surround effects, place the surround speakers so the sound is diffused around the listening area. Avoid pointing them directly at the listeners. Wall-Mounting the Micro Satellites The Micro satellites may be wall-mounted using the included keyhole bracket. Install a #8 or #10 mounting screw on the wall (not sup- plied–consult a knowledgeable installer regarding the proper hardware to use on your wall). Attach the bracket to the back of the speaker with the machine screw...
Este manual também é adequado para os modelos :Speakers - Micro80x II (494.65 kb)
Speakers - Micro90c II (494.65 kb)