Assessments - 2, GPA: 5
(
)
)
|
Facilidade de uso
Move the device nearer to this unit. (See “ About Bluetooth ® ”) • Remove any obstacle between this unit and the device. • Switch off any wireless LAN device. • Select “ MODE 1” for stable communication. ( See “ Switching transmission” ) • If the indicator lights up red, please replace the batteries. ( See “Inserting the batteries” ) The power supply of the unit cuts out or you hear a noise. • If you turn the volume up too high when the unit is connected to your computer, you may find that the unit is turned off or you may hear a noise. In this case, please turn down the volume of the unit. When you turn on the unit, audio is not output and the indicator blinks alternately in red and blue. • A problem has occurred. Disconnect the USB cable from the speaker and remove the batteries. After waiting for a few moments, reconnect the USB cable or reinsert the batteries and turn on the power. If the problem continues, contact the dealer. When the following situations occur, refer to the instructions below to reset the memory: – There is no response when buttons are pressed. – You want to clear and reset the memory. 1 Press [ I/I] to turn the power on. 2 Press and hold [ I/I] for about 10 seconds until the indicator turns off. • All the settings are set back to the factory preset. • The pairing device information will have been deleted by the reset, so it will be necessary to perform pairing again. Delete the pairing information for this unit from the Bluetooth ® device, then perform the pairing operation again. (See “Pair with another device and listen to audio”) Specifications Amplifier section RMS output power: 1 W per channel (8 . ), 1 kHz, 5 % THD Total RMS power: 2 W FTC output power: 0.7 W per channel (8 . ), 60 Hz to 16 kHz, 1 % THD Total FTC power: 1.4 W Total harmonic distortion: 0.15 % ( 1 kHz) S/ N ratio: 87 dB ( 1 kHz, 20 kHz LPF) Speaker: .36 mm (1 3/8q) (8 . ) k 2 Bluetooth ® section Bluetooth ® system specification: Ver. 2.1 i EDR Wireless equipment classification: Class 2 (2.5 mW) Supported profiles: A2DP Frequency band: 2402 - 2480 MHz (Adaptive Frequency Hopping) Driving distance: 10 m (33 ft.) Line of Sight (iPhone 4, at height 1 m (3.3 ft.) , in “MODE 1” ) General Power supply: Panasonic alkaline battery: AA size/ LR6 k 2, DC 3.0 V USB power supply: DC 5.0 V Operating temperature range: 0 oC to i40 oC ( i32 oF to i104 oF) Operating humidity range: 20% to 80% RH ( no condensation) Dimensions (W k H k D) : 103 mm k 41.9 mm k 103 mm (4 1/ 16qk 1 21/ 32qk 4 1/ 16q) Mass (Weight): Approx. 216 g (7.6 oz) (with batteries) Approx. 170 g (6.0 oz) (without batteries) Battery duration time: Approx. 4 hours (Panasonic alkaline battery LR6 Type) Note • Specifications are subject to change without notice. Mass and dimensions are approximate. • Total harmonic distortion is measured by the digital spectrum analyzer. Notes on Speakers • These speakers do not have magnetic shielding. Do not put them near devices easily influenced by magnetism. • When you play at high levels for a long period, it can cause damage to the unit and decrease the life of the unit. • Decrease the volume when you play distorted sound to prevent damage. The model number and serial number of this product can be found on the top of the unit and the inside of the battery cover. Please note them in the space provided below and keep for future reference. MODEL NUMBER SC-MC07 SERIAL NUMBER User memo: DATE OF PURCHASE DEALER NAME DEALER ADDRESS TELEPHONE NUMBER Limited Warranty ( ONLY FOR U. S. A. AND PUERTO RICO) Panasonic Consumer Marketing Company of North America, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Home Audio Products Limited Warranty Limited Warranty Coverage ( For USA and Puerto Rico Only) If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Marketing Company of North America ( referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase ( “ warranty period”) , at its option either ( a) repair your product with new or refurbished parts, ( b) replace it with a new or a refurbished equivalent value product, or ( c) refund your purchase price. The decision torepair, replace or refund will be made by the warrantor. Product or Part Name Parts Labor Audio Products (except items below) 1 year 1 year DVD Home Theater System 1 year 1 year Home Theater Audio System 1 year 1 year SD Memory Cards, Rechargeable Battery Packs (defective exchange) 90 days Not Applicable During the “Labor” warranty period there will be no charge for labor. During the “ Parts” warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non- rechargeable batteries, antennas, and cosmetic parts (cabinet) . This warranty only applies to productspurchased and serviced in the United States or Puerto Rico. This warranty is e...