Assessments - , GPA:
(
)
)
Fabricante : Yamaha
Arquivo Tamanho: 1.74 mb
Arquivo Nome :
Língua de Ensino: 
O documento está colocado, por favor, espere
 |
O documento está colocado, por favor, espere
Facilidade de uso
A vessel with water in it – If the vessel falls by vibrations and water spills, it may cause damage to the speaker, and/or you may get an electric shock. • Do not place the speaker where foreign objects such as water drips might fall. It might cause a fire, damage to the speaker, and/or personal injury. • Do not place the speaker where it is liable to be knocked over or struck by falling objects. Stable placement will also ensure better sound performance. • Placing the speaker on the same shelf or rack as the turntable can result in feedback. • Never put a hand or a foreign object into the port located on the front of the speaker as this might cause personal injury and/or damage to the speaker. • When moving the speaker, do not hold the port as it might cause personal injury and/or damage to the speaker. • Any time you note distortion, reduce the volume control on your amplifier to a lower setting. Never allow your amplifier to be driven into “clipping”. Otherwise the speaker may be damaged. • When using an amplifier with a rated output power higher than the nominal input power of the speaker, care should be taken never to exceed the speaker’s maximum input. • Do not attempt to clean the speaker with chemical solvents as this might damage the finish. Use a clean, dry cloth. • Do not attempt to modify or fix the speaker. Contact qualified Yamaha service personnel when any service is needed. The cabinet should never be opened for any reasons. • As this unit is heavy, whenever it is moved, two people are required to transport it safely. • Secure placement or installation is the owner’s responsibility. Yamaha shall not be liable for any accident caused by improper placement or installation of the speaker. PRECAUTIONS WHEN POSITIONING THE SPEAKERS The speaker is constructed with the majority of the weight located in its upper portion, and is thus susceptible to falling over if proper care is not taken to insure its stability. If the speaker falls over, it may damage the speaker or be the cause of injury (or even death) to persons and/or damage to personal property. For safe and proper use of the speaker: • Position the speaker in a location that is solid, level, smooth, and low (with respect to the floor). • Do not push or apply pressure to the side of the speaker when moving, or lean objects against the side of the speaker. • Do not sit on or set objects on top of the speaker. • Do not remove the stands attached to the bottom of the speaker as this might cause the serious accidents, resulting from falling over of the speaker. Vibrations or jolts associated with earthquakes and other phenomena or activities may cause the speaker to fall over. For safety reasons, using commercially available products that increase stability in the speaker is recommended (metal fittings or chains, etc.). 1 En FEATURES • Type: 3-way, 3-speaker bass-reflex floor standing tower speaker for main channels. Aluminum diecast stand included. • Woofer: Dual 16 cm A-PMD cone, Midrange: 13 cm A-PMD cone, Tweeter: 3 cm Aluminum dome. PLACING THE SPEAKERS English ¦ Using as 2ch stereo speakers Better stereo images will be obtained when the speakers are slightly angled in towards the listeners. ¦ Using as front speakers in a multi channel system Position the speakers on both sides of the TV. The positioning of speakers is important, because it controls the whole sound quality of a multi channel system. Set up the speakers on the basis of your listening position by following the owner’s manual supplied with your amplifier. Soavo-3 Surround Subwoofer Center Notes When setting up this unit on a thick carpet etc. Attach the spikes at the four point on the speaker stand to increase stability and improve sound quality. How to attach the spike: 1Lay down this unit on the floor. 2Turn the nut and position it near the tip of the spike. 3Screw the spikes into the hole of the stands. 4Place the speaker in the desired location in an upright position and adjust the length of the spike to match the depth of the carpet. (repeat step 1, 2 and 3.) 5When adjustment is finished, turn the nut up to the base of the stand firmly. • The tips of the spikes may scratch or damage the flooring. Please be careful when positioning the speakers. • Do not push or lean against the speaker to prevent falling over, which may cause damage to this unit or personal injury. • As this unit is heavy, whenever it is moved, two people are required to transport it safely. Notes Spike x 4 Nut x 4 23 • Do not remove the stands attached to the bottom of the speaker as this might cause the serious accidents, resulting from falling over of the speaker. • Placing this unit too close to a CRT TV set might impair picture color or create a buzzing noise. Should this happen, move the speaker away (more than 20 cm (7-7/ 8”)) from the TV set. When using a PDP or LCD TV, it would not happen. 2 En CONNECTING TO YOUR AMPLIFIER This speaker is capable of standard connections and bi-wired connections. B...