Assessments - 4, GPA: 4
(
)
)
|
Fotos e especificações Yamaha NS-B700 |
Facilidade de uso
Stable placement will also ensure better sound performance. • Placing the speaker on the same shelf or rack as the turntable can result in acoustical feedback. • Never put a hand or a foreign object into the port located on the rear of the speaker, as this might cause personal injury and/or damage to the speaker. • When moving the speaker, do not hold the port, as it might cause personal injury and/or damage to the speaker. • Any time you notice distortion, reduce the volume control on your amplifier. Never allow your amplifier to be driven into “clipping.” Otherwise the speaker may be damaged. • When using an amplifier with a rated output power higher than the nominal input power of the speaker, care should be taken never to exceed the speaker’s maximum input. • Do not attempt to clean the speaker with chemical solvents, as this might damage the finish. Use a clean, dry cloth. • Do not attempt to modify or repair the speaker. Contact qualified YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reasons. • Secure placement and installation is the owner’s responsibility. YAMAHA shall not be liable for any accident caused by improper placement or installation of speakers. Information for Users on Collection and Disposal of Old Equipment This symbol on the products, packaging, and/ or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/ 96/EC. By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. [For business users in the European Union] If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. [Information on Disposal in other Countries outside the European Union] This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. i En PLACING THE SPEAKERS PLACING THE SPEAKERS ¦Using as 2ch stereo speakers Better stereo images will be obtained when the speakers are slightly angled in towards the listeners. ¦Using as front speakers in a multi channel system Position the speakers on both sides of the TV. The positioning of speakers is important, since this dictates the overall sound quality of the multi channel system. Set up the speakers on the basis of your listening position by following the owner’s manual supplied with your amplifier. ¦Using as presence or surround speakers Mount the speakers on a wall or place the speakers on a shelf. Determine the best position by following the owner’s manual supplied with your amplifier. NS-B700 Presence Subwoofer NS-B700 Front NS-B700 Surround NS-B700 Surround back Center Notes • Placing this unit too close to a TV set might impair picture color or create a buzzing noise. Should this happen, move the speaker away (more than 20 cm (7-7/8”)) from the TV set. • To avoid accidents resulting from tripping over loose speaker cables, fix them to the floor. ¦To mount the speaker on a wall by using the attached mounting bracket Fasten screws into a firm wall or wall support as shown in the figure, and hang the holes of the mounting bracket on the protruding screws. By setting the two supplied bass control plugs into the ports on the rear of the speaker, the tone and volume balance of the low bass sound produced between the port and the wall will be optimized. * Make sure that the screws are securely in the narrow sections of the holes. Tapping screw (3.5-4 mm) (5/32”-3/16”) (Available at the hardware store) You can also use the screw holes on the rear of the speaker for installing the speaker using a commercially available speaker bracket (if you do not use the attached mounting bracket). Min. 20 mm (13/16”) 3 mm (1/8”) 40 mm (1-5/8”) Wall/wall support 60 mm (2-3/8”) Screw holes Diameter: 6 mm (1/4”) Hole Depth: 15 mm (19/32”) WARNING • This speaker weighs 3.5 kg (7 lbs. 12 oz.). Do not mount it on thin plywood or a wall with soft surface material. If mounted, the screws may come out and the speaker may fall. This may damage the speaker, or cause personal injury. • Do not install the speaker on a wall with nails, adhesives, or any other unstable hardware. Long term use and vibrations may cause it to fall. • To avoid accidents resulting from tripping over loose speaker cable, fix them securely to the wall. English 1 En CONNECTIONS TO YOUR AMPLIFIER CONNECTIONS TO...