Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
s TUNER/RDS . Select FM source. . { { { information. 3 Get started Caution . Use of controls, or adjustments or performance of procedures other than hereinmay result in hazardous radiation exposure orother unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this device.The model number and serial number are on the back of the device. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Connect FM antenna Tip . For optimal reception, fully ex tend and adjust the position of the antenna. Connect the supplied FM antenna to the FM =-+%= jack on the back of the main unit. Connect power Caution . Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. . Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never pull the cord. . Before connecting the AC power cord, ensureyou have completed all other connections. Connect the power cord to: the AC~MAINS jack on the back of the main unit. the wall outlet. 2 Inser t 2 A AA batteries with correct ~Q " 3 Close the batter y compar tment. abc Note . If you are not going to use the remote control for a long time, remove the batteries. . Do not use old and new or different types of batteries in combination. . Batteries contain chemical substances, so theyshould be disposed of properly. English Set clock 1 In standby mode, press and hold PROG/ Prepare the remote control <"<'-6 for more than two seconds to activate the clock setting mode. » The 12 hour or 24 hour format is Caution displayed. . Risk of explosion! Keep batteries away from % %"; ! . 2 Press / to select 12 hour or 24 " hour format, and then press PROG/ <"<'-6. To insert the remote control battery: » The hour digits are displayed and begin 1 Open the batter y compar tment. to blink. 3 Press / to set the hour, and then press $+";)<"<'-6. » The minute digits are displayed and begin to blink. 4 Press / to set the minute. 5 Press $+";)<"<'-6" Turn on Press . » The unit switches to the last selected source. Switch to standby Press again to switch the unit to standby mode. » The backlight on the display panel is reduced. » ?$ panel. To switch to Eco power standby mode: Press and hold for more than two seconds. » The backlight on the display panel turns off. To switch between normal standby mode and Eco power standby mode: Press and hold for more than two seconds. Note . If no button is pressed over 15 minutes instandby mode, this device goes to Eco power standby mode automatically. 4 Play Play from disc 1 Press CD on the remote control or press SRC repeatedly on the main unit to select CD source. 2 Inser t a disc into the disc compar tment with the printed side facing right. » ? "< not, press . Press EJECT to take the disc out of the disc tray. Play iPod/iPhone/iPad You can enjoy audio from iPod/iPhone/iPad through this docking system. Compatible iPod/iPhone/iPad The unit suppor ts the following iPod/iPhone/ iPad models. Made for iPad 2 iPad » The audio in connected iPod/iPhone/ iPhone 4 iPad streams from this docking system iPhone 3GS automatically. If not, press . iPhone 3G To navigate the menu: press MENU, iPhone and press / / / to select, iPod classic and then press OK" iPod with video iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th . Charge the iPod/iPhone/iPad iPod touch (1st, 2nd, 3rd, and 4th When the unit is connected to power, the docked iPod/iPhone/iPad begins to charge automatically. $)$)$ Note Place the iPod/iPhone/iPad in the dock. . iPod with color display, iPod classic, and iPod with video are not compatible with dockcharging. Remove the iPod/iPhone/iPad Pull the iPod/iPhone/iPad out of the dock. $)$)$ Note . Make sure that your iPod/iPhone/iPad has been loaded securely. 1 Press DOCK on the remote control or press SRC repeatedly on the main unit to select iPod/iPhone/iPad source. 2 Play audio on your iPod/iPhone/iPad. English Play from USB Note . Ensure that the USB device contains playable audio content. 1 Press USB on the remote control or press SRC repeatedly on the main unit to select the USB source. 2 Inser t the USB device into the ]| socket on the back of the unit. » ? "< not, press . 5 Play options Pause/resume play During play, press to pause/resume play. Stop play During play, press to stop play. Skip to a track For CD: 1 Press / to select another track. . To select a track directly, press a key on the numerical keypad. For MP3 disc and USB: 1 Press / to select an album or folder. 2 Press / $" Search within a track 1 During play, press and hold / to search within a track. 2 Release to resume normal play. +QLVXQZ[ 1 During play, press +-$-=6)>??- repeatedly to select: >?$ played repeatedly. >*$ played repeatedly. >*$ a random sequence. 2 To return to normal play, p...