Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
__________________________ Serial No. ___________________________ Prepare the remote control Caution • Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire. • Risk of product damage! When the remote control is not used for long periods, remove the batteries. • Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. For first-time use: Remove the protective tab to activate the remote control battery. To replace the remote control battery: 1 Open the battery compartment. 2 Insert one CR2025 battery with correct polarity (+/-) as indicated. 3 Close the battery compartment. Turn on Press POWER. » The unit switches to the last selected source. Switch to standby Press POWER again to switch the unit to standby mode. » The red standby indicator turns on. English 123123 EN 7 5 Play Play from iPod/iPhone You can enjoy audio from iPod/iPhone through this device. Compatible iPod/iPhone The unit suppor ts the following iPod/iPhone models. Made for • iPod classic • iPod with video • iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generation) • iPod touch (1st, 2nd, 3rd, and 4th generation) • iPhone (4th generation) • iPhone 4 • iPhone 3GS • iPhone 3G • iPhone Load the iPod/iPhone Inser t your iPod/iPhone on the dock. Charge the iPod/iPhone When the unit is connected to power, the docked iPod/iPhone begins to charge automatically. Listen to the iPod/iPhone Note • Make sure that your iPod/iPhone has been loaded securely. 1 Press SOURCE repeatedly to select iPod/ iPhone source. 2 Play audio on your iPod/iPhone. » The audio in connected iPod/iPhone streams from this device automatically. If not, press . Remove the iPod/iPhone Pull the iPod/iPhone out of the dock. Play disc 1 Press SOURCE repeatedly to select the disc source. 2 Open the disc compar tment. 3 Inser t a disc with the printed side facing up. 4 Close the disc compar tment. » Play star ts automatically. • To pause or resume play, press . • To stop play, press . • To skip to another track, press / . • To search within a track, press and hold / for three seconds. 8 EN Control play Display play information During play, press DISPLAY repeatedly to display the play information. Program tracks You can program a maximum of 20 tracks. 1 In disc mode, in the stop position, press PROG to activate the program mode. » [01-] is displayed. 2 Press / to select a track number, and then press PROG to confirm. 3 Repeat steps 1-2 to select and store more tracks. 4 Press to play the programmed tracks. • To erase the program, in the stop position, press . Repeat play 1 During play, press REPEAT repeatedly to select: • [r1]: play the current track repeatedly. • [rA]: play all tracks repeatedly. 2 To return to normal play, press REPEAT repeatedly until repeat mode is no longer displayed. Enhance bass During play, press DBB to turn on or off dynamic bass enhancement. • [DBB-0]: DBB off • [DBB-1]: DBB on Adjust volume During play, press VOL +/-to increase or decrease the volume. Mute sound During play, press MUTE to mute or restore the volume. English EN 9 6 Listen to radio Tune to a radio station Tip • Position the antenna as far as possible from TV, VCR or other radiation source. • For optimal reception, fully extend and adjust the position of the antenna. 1 Press SOURCE repeatedly to select FM source. 2 Press and hold / for three seconds. » The radio tunes to a station with strong reception automatically. 3 Repeat step 2 to tune to more stations. To tune to a weak station: Press / repeatedly until you find optimal reception. Program radio stations automatically Note • You can program a maximum of 20 preset FM radio stations. In FM mode, press and hold PROG for three seconds. » The device stores all available FM radio stations and broadcasts the first available station automatically. Program radio stations manually Note • You can program a maximum of 20 preset radio stations. 1 Tune to a radio station. 2 Press PROG to activate program mode. » The preset number is displayed. 3 Press PRESET +/- to select a number, and then press PROG to confirm. » The preset number and the frequency of the preset station are displayed. 4 Repeat steps 1-4 to program other stations. Tip • To overwrite a programmed station, store another station in its place. Select a preset radio station In FM mode, press PRESET +/-to select a preset number. 10 EN 7 Other features Listen to an external device You can listen to an external device through this device. 1 Press SOURCE repeatedly to select AUX source. 2 Connect the supplied MP3 link cable to: • MP3 LINK jack (3.5 mm) on the unit • the headphone jack on an external device 3 Star t to play the device (see the device user manual). MP3-LINK 8 Product information Note • Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 2 x 2 W RMS Frequency Response 60 Hz-16 kHz, ±3 dB Signal to Noise Ratio Aux Input >50 dBA 0.5 V RMS 20 ko...