Log:
Assessments - 0, GPA: 0 ( )

Instruções de Operação Philips, Modelo DCM129/05

Fabricante : Philips
Arquivo Tamanho: 555.64 kb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



Facilidade de uso


This product is fitted with an approved molded plug. If you replace the fuse, use one with: • the ratings shown on the plug, • a BS 1362 approval, and • the ASTA approval mark. Contact your dealer if you are not sure about what type of fuse to use. Caution: To conform with the EMC directive (2004/108/EC), do not detach the plug from the power cord. Caution ••Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. EN 2 Your Docking Music System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at Introduction With this unit, you can: • enjoy audio from discs, iPod/iPhone, and other external devices • listen to radio stations You can enrich sound output with the following sound effect: • Dynamic Bass Boost (DBB) The unit supports the following media format: What's in the box Check and identify the contents of your package: • Main unit • 2 speakers • Remote control (with battery) • MP3 link cable • User manual EN Overview of the main unit a POWER • Turn on or off the unit. • Switch to standby mode. b SOURCE • Select a source: disc, iPod/iPhone, FM, or AUX. c DBB • Turns on or off Dynamic Bass Boost (DBB). d • Play a track or all tracks repeatedly. e MP3 LINK • Jack for an external audio device. f Dock for iPod/iPhone g / • Skip to the previous/next track. • Search within a track or disc. • Tune to a radio station. h /MENU • Stop play or erase a program. • In iPod/iPhone mode, access the menu. i • Start or pause play. j VOL +/- • Adjust volume. k Display panel • Show current status. l Disc compartment m FM antenna • Improve FM reception. n Speaker sockects • Connect speakers. o Power cord • Connect AC power. Overview of the remote control adecbfghijklonm abcdefghijkl EN a POWER • Turn on/off the unit. • Switch to standby mode. b DBB • Turn on or off dynamic bass boost. c • Stop play or erase a program. • In iPod/iPhone mode, access the menu. d • Start or pause play. e / • Skip to the previous/next track. • Search within a track or disc. • Tune to a radio station. f VOL +/- • Adjust volume. g PRESET +/- • Select a preset radio station. h DISPLAY • Show current status. i MUTE • Mute or restore volume. j PROG • Program tracks. • Program radio stations. k REPEAT • Play a track or all tracks repeatedly. l SOURCE • Select a source: disc, iPod/iPhone, FM, or AUX. 3 Connect Connect speakers Note ••Insert the stripped portion of each speaker wire into the socket completely. ••For optimal sound, use the supplied speakers only. ••Connect only speakers with impedance that is the same or higher than the supplied speakers. Refer to the Specifications section of this manual. Insert the speaker wires completely into the speaker input sockets on the back of the unit. Connect power Caution ••Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the back or the underside of the Micro Hi-Fi system. ••Before connecting the AC power cord, make sure that you have completed all other connections. EN Connect the AC power cable to the power outlet. 4 Get started Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the rear of the apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Prepare the remote control Caution ••Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire. ••Risk of product damage! When the remote control is not used for long periods, remove the batteries. ••Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. For first-time use: Remove the protective tab to activate the remote control battery. To replace the remote control battery: 1 Open the battery compartment. 2 Insert one CR2025 battery with correct polarity (+/-) as indicated. 3 Close the battery compartment. 123123 EN Turn on Press POWER. »»The unit switches to the last selected source. Switch to standby Press POWER again to switch the unit to standby mode. »»The red standby indicator turns on. 5 Play Play from iPod/iPhone You can enjoy audio from iPod/iPhone through this device. Compatible iPod/iPhone The unit supports the following iPod/iPhone models. Made for • iPod classic • iPod with video • iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generation) • iPod touch (1st, 2nd, 3rd, and 4th generation) • iPhone (4th generation) • iPhone 4 • iPhone 3GS • iPhone 3G • iPhone Load the iPod/iPhone Insert your iPod/iPhone on the dock. EN Charge the iPod/iPhone When the unit is connected to power, the docked iPod/iPhone begins to charge automatically. Listen to the iPod/iPhone Note ••Make sure that your iPod/iPhone has been loaded securel...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias