Assessments - 3, GPA: 3.3
(
)
)
|
Facilidade de uso
Applicable accessory: Remote Commander. Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead. By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. If you have any questions or problems concerning your unit, please consult your nearest Sony dealer. Preparing a power source 1 Connect the AC power cord (supplied) to the AC power adaptor (supplied). 2 Connect the AC power adaptor to the DC IN 20V jack on the back of this unit firmly and plug it into a wall outlet. To wall outlet AC power AC power adaptor cord AUDIO IN DC IN 20V Note on the AC power adaptor . Use the Sony supplied AC power adaptor only. The polarity of the plugs of other manufactures may be different. Failure to use the supplied AC power adaptor may cause the unit to malfunction. Preparing the remote commander Before using the remote commander for the first time, remove the insulation film. To know when to replace the battery With normal use, the battery (CR2025) should last for about 6 months. When the remote commander no longer operates the unit, replace the battery with a new one. . with the + side facing up Notes . Do not attempt to charge the battery. . If you are not going to use the remote commander for a long time, remove the battery to avoid any damage that may be caused by leakage and corrosion. Operations Troubleshooting Specifications Remote sensor Docking Tray AUDIO IN indicator MEGA BASS indicator Operations Troubleshooting Specifications Remote sensor Docking Tray AUDIO IN indicator MEGA BASS indicator 1 Attach the adapter for your iPod/iPhone. 2 Set your iPod/iPhone in the Docking Tray. Tip Remove the case or cover from your iPod before setting it in the tray . VOLUME + (VOL + on the remote) and . buttons have a tactile dot. Before using the unit To turn on/off the power Press ... (power). The ... (power) button indicator will light up in green when the unit is turned on. To adjust the volume Press VOLUME +/. (VOL +/. on the remote). Tips . The volume range is adjustable between 0 and 30. . When turning on the power, the last volume setting is resumed. The volume will be suitably lowered automatically, if the last volume setting is too loud. . The ... (power) button indicator flashes three times when the sound is set to either maximum or minimum volume. To reinforce the bass sound Press MEGA BASS. The MEGA BASS indicator lights up. You can achieve high quality bass sound. To return to normal sound, press the button again. Power management system After playback of the iPod (or component connected to AUDIO IN jack) has finished, if no operation is performed for about 30 minutes, the unit will automatically turn off. Operating an iPod You can enjoy audio from iPod by setting it in the Docking Tray of this unit. When setting an iPod in the unit, be sure to use the supplied universal dock adapter with your iPod or commercially available products from Apple Inc. If you are using an iPhone, iPhone 3G, iPhone 3GS or iPhone 4, attach the supplied universal dock adapter for iPhone, iPhone 3G, iPhone 3GS or iPhone 4 before connecting. The adapter number, ., . or ., is shown on the underside of the supplied universal dock adapters. . is for the iPhone, . is for the iPhone 3G & iPhone 3GS and . is for the iPhone 4. Check the adapter number before use. Universal Dock Adapter . .. Notes . To use an iPod, refer to the user’s guide of your iPod. . The connector of the unit is exclusively for use with an iPod. If you use a device that does not match the connector, connect it to the AUDIO IN jack of this unit with the suppli...