Assessments - 4, GPA: 4
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
.. Use the same procedure to set the minutes. LOCK OFF” appears on the display .. system is off (Standby mode). iPod/iPhone connector: Erroneous display CHILD LOCK : The child lock function has been enabled. Output voltage: DC 5 V Connect additional audio component to the DVD/PC 5 Use the same procedure as in step 4 to set the time .Send the music data to the USB device again, as Maximum output current: 1 A IN L/R jacks . on the unit using an audio analog to stop playback. iPod/iPhone To disable the child lock, hold down .. on the unit Compatible iPod/iPhone models: the data stored on the USB device may have been cord (not supplied). until “CHILD LOCK OFF” appears on the display .. .iPod touch 4th generation 6 Select the sound source. There is no sound. corrupted. ERROR : The USB device could not be recognized or an .iPod touch 3rd generation 2 Adjust the volume level to minimum. .The character codes that can be displayed by this Press ./.. repeatedly until the desired sound .Make sure the iPod/iPhone is connected securely. unknown device is connected. .iPod touch 2nd generation Press VOLUME .. repeatedly until “VOL MIN” source appears, then press system are numbers and alphabets only. Other .iPod nano 6th generation .. .Make sure the iPod/iPhone is playing music. NoDEVICE : No USB device is connected or the characters are not displayed correctly. .iPod nano 5th generation (video camera) appears on the display .. 7 Turn off the system. .Make sure the iPod/iPhone is updated with the latest connected USB device has been removed. .iPod nano 4th generation (video) 3 Select the DVD/PC function. software. If not, update the iPod/iPhone before using The USB device is not recognized. NoMEMORY : The memory media is not inserted in the .iPod nano 3rd generation (video) Press ..... The system automatically turns on with the system. USB device. .iPod classic Press FUNCTION +/.. repeatedly. before the preset time. .Turn off the system and reconnect the USB device, then . iPhone 4S .Adjust the volume. turn on the system. NO TRACK : Playable file on the USB device is not loaded . iPhone 4 4 Start playback. If the system is already on at the preset time, the Play in the system. .Check the information on the websites about . iPhone 3GS Timer will not be activated. Do not operate the system Start playback of the connected component and adjust The sound is distorted. . iPhone 3G compatible USB devices with URLs listed under NOT USED : You tried to perform a specific operation from the time the system turns on until the playback the volume. .Make sure the iPod/iPhone is connected securely. “Playing a file of the USB device.” under conditions where that operation is prohibited. “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has starts. been designed to connect specifically to iPod or iPhone, respectively, and has .Turn down the volume. Note NO SUPPORT : An unsupported USB device, iPod/ been certified by the developer to meet Apple performance standards. Apple The system may enter Standby mode automatically if the volume To check the setting .Set the “EQ” setting of the iPod/iPhone to “Off ” or The USB device is not working properly. iPhone model is connected, or the iPod/iPhone whose is not responsible for the operation of this device or its compliance with safety level of the connected component is too low. Adjust the component’s “Flat.” .Refer to the USB device operation manual for how to battery is empty is connected. and regulatory standards. Please note that the use of this accessory with iPod volume accordingly. See “To turn off the automatic standby function.” 1 Press TIMER MENU .. or iPhone may affect wireless performance. deal with this problem. TIME NG : The Play Timer start and end times are set to Unexpected track changes occur during USB section 2 Press ./.. repeatedly to select “SELECT,” and then the same time. Supported bit rates: playback. Play does not start. press .. MP3 (MPEG 1 Audio Layer-3): 32 kbps . 320 kbps, VBR .Turn the “Shake to Shuffle” function (changing tracks .Turn off the system and reconnect the USB device, then WMA: 48 kbps . 192 kbps, VBR AAC: 48 kbps . 320 kbps Adjusting the sound 3 Press ./.. repeatedly to select “PLAY SEL,” and by shaking the iPod/iPhone) off on the iPod/iPhone turn on the system. Sampling frequencies: then press .. when listening to music on the iPod/iPhone at high .Check the information on the websites about MP3 (MPEG 1 Audio Layer-3): 32/44.1/48 kHz To Press WMA: 44.1 kHz To cancel the timer Precautions AAC: 44.1 kHz volumes. If this function is enabled, unexpected track compatible USB devices with URLs listed under Adjust the volume VOLUME +/... changes may occur due to the vibrations caused by “Playing a file of the USB device. ” (USB) port: Type A, maximum current 500 mA Repeat the same procedure as above until “OFF” appears Generate a more BASS BOOST . repeatedly to sound pressure from the system. .Press .. to start playback. .. On safety Tu...