Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
EN DE FR ES JA PRECAUTIONS PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep this manual in a safe place for future reference. CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the device or other property. These precautions include, but are not limited to, the following: English Location Connections • If you use a stand, make sure to observe the following precautions in order to avoid toppling the device or causing damage to the internal components. -Check the stand’s specifications and make sure that it is sturdy enough to support the weight of the speaker. -Mount only one speaker on each speaker stand. -Use the supplied screws if included. -Tighten fastening screws securely. -Use the speaker stands with their legs fully opened. -Use the stand at a height of less than 140cm. -Add weight such as sand bags around the stand legs to prevent them from falling over. -Remove the speakers from the stands before moving the stands or adjusting their height. -Limit the number of people around the placed stand. • Always consult qualified Yamaha service personnel if the device installation requires construction work, and make sure to observe the following precautions. -Choose mounting hardware and an installation location that can support the weight of the device. -Avoid locations that are exposed to constant vibration. -Make sure to use the specified hardware. -Inspect the device periodically. • When transporting or moving the device, always use two or more people. Attempting to lift the device by yourself may damage your back, result in other injury, or cause damage to the device itself. • Before moving the device, remove all connected cables. • Do not expose the device to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel disfiguration or damage to the internal components. • Do not place the device in an unstable position where it might accidentally fall over. • Before connecting the device to other devices, turn off the power for all devices. Before turning the power on or off for all devices, set all volume levels to minimum. • Use only speaker cables for connecting speakers to the speaker jacks. Use of other types of cables may result in fire. Handling caution • When choosing a power amplifier to use with your speakers, make sure that its power output matches the speakers’ power capacity (refer to the Specifications on page 14). Even if the amplifier’s power output is lower than the speakers’ power capacity, the speakers may be damaged when clipping of a high input signal occurs. The following may cause damage to speakers: -Feedback caused when using a microphone. -Continuous high sound pressure level produced by electronic instruments. -Continuous high-power output of distorted signals. -Popping noises caused by turning on equipment, or by connecting or disconnecting system components while the amplifier is turned on. • When turning on the AC power in your audio system, always turn on the power amplifier LAST, to avoid speaker damage. When turning the power off, the power amplifier should be turned off FIRST for the same reason. • Do not operate this device at high volum...
Este manual também é adequado para os modelos :Speakers - IF2115M/99 (302.13 kb)
Speakers - IF2208 (302.13 kb)