Assessments - 6, GPA: 3.7
(
)
)
|
Facilidade de uso
The polarity of 4-400-214-32(1) Union and other European countries with reference to functions on an iPod, iPhone or iPad, unless the plugs of other manufacturers may be different. separate collection systems) otherwise specified by the text or illustrations. General Failure to use the supplied AC adaptor may cause the unit to malfunction. If you have any questions or problems concerning your The power does not turn on when the AC adaptor is unit, please consult your nearest Sony dealer. This symbol on the product or on its packaging indicates connected. that this product shall not be treated as household waste. .Make sure the AC adaptor is connected to the wall outlet Instead it shall be handed over to the applicable collection General information firmly. point for the recycling of electrical and electronic There is no sound. equipment. By ensuring this product is disposed of .Adjust VOLUME +/. (VOL +/. on the remote). correctly, you will help prevent potential negative Remote control Noise is heard. Reference Guide GB Personal Audio Specifications consequences for the environment and human health, .Ensure that the unit is not near in-use portable phones, Before using the supplied remote for the first time, remove which could otherwise be caused by inappropriate waste etc. the insulation film. handling of this product. The recycling of materials will iPod The power indicator flashes. Aim the remote at the (Remote sensor) of the unit. Docking System help to conserve natural resources. For more detailed DC out: 5 V .The power indicator flashes when the unit receives a The power indicator flashes when the remote’s command is information about recycling of this product, please contact MAX: 2.1 A signal from the remote. In this case, the flashing does received. your local Civic Office, your household waste disposal not mean there is an error or fault. Bluetooth service or the shop where you purchased the product. Applicable accessory: Remote control. Output When using an iPod on the Dock Bluetooth Specification Power Class 2 Disposal of waste batteries (applicable Maximum communication range There is no sound. in the European Union and other Line of sight approx. 10 m*1 .Make sure the iPod is connected firmly. European countries with separate Frequency band .Make sure that the function for iPod is activated. collection systems) 2.4 GHz band (2.4000 GHz – 2.4835 GHz) Operation is not performed. .Make sure the iPod is connected firmly. Communication System This symbol on the battery or on the packaging indicates Bluetooth Specification Version 2.1 + EDR (Enhanced .Check that the iPod is compatible with this unit. (See that the battery provided with this product shall not be Data Rate) “Dock Connector compatible models.”) treated as household waste. The iPod does not charge. Compatible Bluetooth Profiles*2 On certain batteries this symbol might be used in .Make sure the iPod is connected firmly. A2DP (Advanced Audio Distribution Profile) combination with a chemical symbol. The chemical .Make sure the AC adaptor is connected firmly. AVRCP*3 (Audio/Video Remote Control Profile) symbols for mercury (Hg) or lead (Pb) are added if the .Check that the iPod is compatible with this unit. (See battery contains more than 0.0005% mercury or 0.004% Supported codec*4 “Dock Connector compatible models.”) lead. SBC (Subband Codec) By ensuring these batteries are disposed of correctly, you *1 The actual range will vary depending on factors such as obstacles When using the Bluetooth connection will help prevent potentially negative consequences for the between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, aerial performance, environment and human health which could otherwise be There is no sound. operating system, application software, etc. caused by inappropriate waste handling of the battery. The .Ensure that this unit is not too far from the iPod, or this .side facing up *2 Bluetooth standard profiles provide the specifications for recycling of the materials will help to conserve natural unit is not receiving interference from a wireless LAN, Bluetooth communication between devices. Note resources. other 2.4 GHz wireless device, or microwave oven. *3 Some operations may not be available for some models of iPod. . If you are not going to use the remote for a long time, .Check that the Bluetooth connection is made properly In case of products that for safety, performance or data *4 Codec: Audio signal compression and conversion format remove the battery to avoid any damage that may be caused between this unit and the iPod. integrity reasons require a permanent connection with an by leakage or corrosion. .Pair this unit and the iPod again. incorporated battery, this battery should be replaced by General qualified service staff only. .Keep away from metal objects or surfaces. Speaker To ensure that the battery will be treated properly, hand .Make sure that the Bluetooth function is act...