|
Facilidade de uso
Press the STANDBY button, located on the remote control unit or on the front panel of the device, to turn on the device’s power. B. VOLUME 1. Press the VOL + button on the remote control unit to increase the overall system volume; the display on the front panel will show the overall volume level of the system in a numerical format. 2. Press the VOL - button on the remote control unit to decrease the overall system volume; the display on the front panel will show the overall volume level of the system in a numerical format. C. 3D SOUND MODE 1. Connect the center and rear speakers to the system. 2. Press the 3D button located on the remote control unit to turn the 3D sound on or off. D. CENTER SPEAKER 1. Press the CEN + button on the remote control unit to increase the volume level on the central speaker; the display on the front panel will show the volume level of the central speaker in a numerical format. 2. Press the CEN - button on the remote control unit to decrease the volume level on the central speaker; the display on the front panel will show the volume level of the central speakers in a numerical format. E. REAR SPEAKERS 1. Press the REAR + button on the remote control unit to increase the volume level on the rear speakers; the display on the front panel will show the volume level of the rear speakers in a numerical format. 2. Press the REAR - button on the remote control unit to decrease the volume level on the rear speakers; the display on the front panel will show the volume level of the rear speakers in a numerical format. F. FRONT SPEAKERS 1. Press the FRONT + button on the remote control unit to increase the volume level on the front speakers; the display on the front panel will show the volume level of the front speakers in a numerical format. 2. Press the FRONT - button on the remote control unit to decrease the volume level on the front speakers; the display on the front panel will show the volume level of the front speakers in a numerical format. G. AUDIO SOURCE SELECTION - 2.1 CH or 5.1 CH 1. Connect the system correctly to the audio source. 2. Press the CD/DVD button on the remote control unit or on the front panel of the subwoofer to select the audio source (2.1 CH or 5.1 CH). H. MUTE FUNCTION I. Press the MUTE button on the front panel or on the remote control unit to turn off the sound. 2. The MUTE indicator will appear on the front of the subwoofer. 3. Press the MUTE button again to turn on the sound. I. AM/FM TUNER Connect the AM and FM antennas to their respective jacks located on the rear panel of the subwoofer 1. Press the INPUT button on the remote control unit or on the front panel until the subwoofer’s display shows the “TUNE” indicator. 3. Use the FM/AM button located on the remote control unit to choose the desired band (FM or AM). 4. Press the SCAN button on the remote control unit to activate the automatic tuning function. The tuner will tune to a radio station automatically, 5. Press the TUNE+ or TUNE- button on the remote control unit to tune to a radio station manually, 6. Press the ST/MN button on the remote control unit while in the FM band to choose between stereo and mono modes. 7. To save a chosen radio station into memory, press the MEMORY button on the remote control unit and then press the desired memory location number on the numeric keypad and the station will be saved into memory. To enter a number of ten or higher, first press the 10+ button and then a numeric button from 0-9. NOTE: You can save up to 20 radio stations into memory, RESOLVING MALFUNCTIONS 1. THERE IS NO SOUND AT ALL (1) Make sure the system is connected properly. (2) Increase the volume. (3) Make sure the audio input is selected properly, (4) Make sure the MUTE function has not been activated, 2. NO SOUND IS COMING FROM THE FRONT-LEFT SPEAKER (1) Make sure the front-left speaker is properly connected to the device. (2) Make sure the device is properly connected to the audio source. 6 -Q- 4 02 6.qxd 04.10.2005 11:31 Page 7 ENGLISH 3. NO SOUND IS COMING FROM THE FRONT-RIGHT SPEAKER (1) Make sure the front-right speaker is properly connected to the device. (2) Make sure the device is properly connected to the audio source. 4. NO SOUND IS COMING FROM THE CENTRAL SPEAKER (1) Make sure the central speaker is properly connected to the device. (2) Make sure the device is properly connected to the audio source. (3) Increase the volume of the central speaker. 5. NO SOUND IS COMING FROM THE REAR SPEAKERS (1) Maker sure the rear speakers are connected properly. (2) Make sure the device is properly connected to the audio source. NOTE: The central and rear speakers only work if the system is connected to a six-channel audio source (for example, a DVD player with an AC-3/Dolby Digital decoder) or, if in 3D mode, when connected through the 2.1 CH audio input. 6. NO RADIO STATION RECEPTION (1) Verify that the antennas are connected to their respective j...
Este manual também é adequado para os modelos :Speakers - VT-4026 (330.3 kb)
Speakers - VT-4026-4036 (330.27 kb)