Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
Read and understand all the applicable instructions before installing or operating the product. . Retain documents. Keep this manual in a convenient place for reference. . Heed warnings. Be aware of all warnings on the product and in the instructions. . Follow instructions. Install and use this product only as described in the instructions. Don’t try to use this product in ways it wasn’t designed for. . Use indoors only. Don’t expose this product to the weather or harsh environmental conditions such as continuous sunlight, excessive humidity, or rain. . Keep product dry. Don’t use the product near water; for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Also, don’t handle the product when your hands are wet or damp. . Avoid heat. Locate the product away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. . Maintain ventilation. Locate the product so as not to interfere with its proper ventilation. Don’t use the product on a bed, sofa, rug, or similar surface that may block the ventilation openings, or in a bookcase or cabinet that may impede the flow of air through the ventilation openings. . Use the right power. Don’t connect the product directly to electrical line voltage. Use only the power adapter provided with the product, described in the operating instructions, or as marked on the product. . Ground product properly. Make sure the product’s means of grounding or polarization is not defeated. . Keep product clean. From time to time, wipe off the product with a clean soft cloth. Don’t use abrasive materials, thinners, alcohol or other chemical solvents or materials. . Avoid spills and foreign objects. Make sure liquids and objects don’t get into the product enclosure through any openings. . Get professional service. Have the product serviced only by qualified service personnel when: • Liquids have spilled or objects have fallen into the product • The product has been exposed to rain • The product doesn’t seem to operate normally • The product is damaged Don’t attempt to service the product yourself. Doing so will void the warranty. If you have any questions, call Russound at 1.800.638.8055 or 603.659.5170. Product Information Product Overview The BGD1 iBridge Dock allows you to use an iPod as a remote source for a Russound RNET® or other multiroom system. Used with a Russound RNET A/V Decoder, it provides either RNET or infrared (IR) control of the iPod, depending on the type of system. With a Russound RNET system, the BGD1 treats the iPod as a fully functional RNET smart source. It gives the system’s keypads, touchscreens, and remotes full control of the iPod: Play, Pause, Next Song, Previous Song, Playlist Up, and Playlist Down. The UNO-TS2 touchscreen adds the ability to select music by playlist, genre, artist, album, and song. Front and Rear Views The BGD1 also enables program information to display on the RNET system’s keypads and touchscreens. They show playlist, genre, artist, album, and song title information from the iPod. When used with a non-RNET system, the BGD1 only conveys IR commands from the system to the iPod. No program information feeds back to the system. The BGD1 supports most iPod models. It connects via a single CAT-5 cable to an RNET A/V Decoder at the system controller. In addition, the BGD1 iBridge Dock provides power to the iPod to keep it charged while docked and connected to the system. 1 1 2 3 CONNECTOR WELL – Accepts most iPod models with supplied adapters SOURCE/FUNCTION SELECTOR – 8position switch for selecting source input or function OS UPDATE PORT – 4-pole connector for updating device firmware with programming cable, Russound part number 2500- 521065 RNET A/V PORT – RJ-45 connector for RNET A/V Decoder POWER JACK – Connector for included 12 VDC 1 A power adapter The source/function selector allows using multiple units on one RNET system by assigning each a unique ID. It also supports a simple IR mode for non-RNET systems and a PRGM mode for firmware updates. 2 3 4 5 4 5 4 Typical Applications Multi-Zone Controller CAS44 Power Supply Connection to RNET system Connection for IR control Installation Connections Note: The BGD1 iBridge Dock requires the use of an RAVD1 RNET A/V Decoder at the audio system, regardless of which system is used. 1. Locate devices. Place the iBridge Dock where the iPod will be located. Place the RNET A/V Decoder with the audio system controller. 2. Run cable. Install CAT-5 or CAT-5e cable between the Dock and Decoder locations, up to 300 feet (90 m). If desired, use modular wall plates and RJ-45 patch cables for a neater appearance. 3. Connect iBridge Dock. Crimp an RJ-45 connector on the source end of the CAT-5 cable, following the T568A standard as shown. Plug the connector into the RNET A/V jack on the Dock. (If using a wall plate, punch down the CAT-5 per the T568A standard and use a straight-through patch cable...