Assessments - 2, GPA: 3
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Keep screwdrivers and other metallic objects away from the disc mechanism and disc. Service This product is made of precision parts. Do not attempt to disassemble or adjust any parts. For repair, please consult your nearest authorized Panasonic Service Center. System Configuration To operate this CD changer, an optional main control unit (listed below) must be connected and purchased separately. CQ-HX2083U, CQ-HX1083U, CQ-HR1003U, CQ-DFX983U, CQ-DF903U, CQ-DFX883U, CQ-DF783U, CQ-DFX683U, CQ-DF583U, CQ-DFX4Û3U, CQ-DP383U, CQ-R253U, CQ-RG153UetC. Note: The units listed above are available as of the period over which this unit is on the market. Regarding units other than the above, consult the dealer where you purchased this unit Caution: This product cannot be connected to FM modulator (CY-RM60EUC). 6 CX-DP880U Accessories I—I 1 Operating instruction Panasonic Servicenter Directory Supplied Hardware (1 set) (■> page 13) Note: Additional magazines (CA-MP801D) are available from your local dealer. In USA, call Panasonic Parts Department 1-800-833-9626 to order, Parts No. RYQ0206-K. Location of Controls (See page 14 for details.) Disc Magazine Tray Magazine Inserting r ---------- Note: Do not use 8 cm CDs. ♦ ■\ V. CX-DP880U Preparations Loading and Removing a CD / Cautions: • Be sure to use the magazine supplied with the unit as an accessory, or the optional magazine CA-MP801D. Any other magazines can not be used. • Never use protect film or stabilizer commercially available as a CD accessory for the unit because it may cause trouble. • Do not use irregularly-shaped CD. Failure to observe this may cause malfunction. To Load a CD © Place the CD magazine with the disc mark facing upward, and pull out trays fully one after another from the magazine. (2) Place a CD on the tray. (D Push the tray straightforward into the magazine until it clicks in position. Note: Be careful not to insert more than one disc on a single tray to protect the unit from any unexpected troubles. Magazine CO with the labeled side To Remove a CD Pull out trays from the magazine to the stopper position, and take a compact disc from each of them by hand. Be careful not to allow the disc to drop to the ground while taking it out. Note: Carefully handle the magazine since discs may be disengaged and come out, if the magazine is placed with its disc-inserting port facing downward. CX-OP88OU Loading and Removing the Magazine To Load the Magazine (D Slide the door to the left until it is fully open with a click. (D Check the unit for its top and magazine inserting direction, and carefully push the magazine into it until you hear a click. Note: When inserting the magazine, follow the sign marked on the magazine for the inserting direction. d) Close the door fully until you hear a click. Caution: Be sure to keep the CD unit door closed to prevent dirt and dust from getting into the unit and causing possible malfunctions. To Remove the Magazine Turn the key in the ignition until the accessory indicator lights. Switch the power on of your receiver. ©Open the door. (2) Press the eject button (A). The magazine will eject automatically. ® Pull the magazine straight in the arrow direction until it comes off the unit. For a description of the functions, refer to the operating instructions for the control unit. (CQ-R253U etc.) CX-DP880U Troubleshooting Preliminary Steps Check and take steps as described in the tables below. If You Suspect Something Wrong Immediately switch power off. Disconnect the power cable and check that there is neither smoke nor heat from the unit beiore asking for repairs. Never try to repair the unit yourself because it is dangerous to do so. Cautions: • Do not use the unit if it malfunctions or something is wrong. • Do not use the unit in an irregular condition, for example, no sound, smoke or foul smell, which can cause ignition or electric shock. Immediately stop using the unit and call the store where you purchased it. Trouble Shooting Tips Trouble ) C Cause/Step Trouble Shooting Tips (continued) Error Display Messages Possible Cause/Possible solution Displays when the compact disc is dirty or when it is inverted. Next compact disc is automatically selected. Displays when the compact disc has a scratch on it. Next compact disc is automatically selected. Displays when the unit stops operating for some reason. Press the eject button of changer unit. Displays when there is no disc in the disc magazine. • Numbers before E1, E2 are error disc numbers. • Display messages differ depending on the control unit. érate Malfunctionall Reset Switch Press the reset switch with a sturdy and pointed object when any operations do not function. If the unit does not become restored even after pressing the reset switch, contact your nearest Panasonic Service Center for service. CX-DP880U Electrical Connection Caution: Connect the battery lead to the ba...