Assessments - 5, GPA: 4.2
(
)
)
|
Fotos e especificações JVC KD-LH917 |
Facilidade de uso
Make sure there is no obstacle in between. Warning: • Store the battery in a place where children cannot reach to avoid risk of accident. • To prevent the battery from over-heating, cracking, or starting a fire: – Do not recharge, short, disassemble, or heat the battery or dispose of it in a fire. – Do not leave the battery with other metallic materials. – Do not poke the battery with tweezers or similar tools. – Wrap the battery with tape and insulate when throwing away or saving it. Caution: 1 (standby/on/attenuator) button • Turns on and off the power and also attenuates the sound. 2 SOURCE button • Selects the source. 3 5 (up) / . (down) buttons • Changes the preset stations. • Changes the services for DAB. • Changes the MP3/WMA folders. 4 VOL (volume) + / – buttons • Adjusts the volume level. 5 Number buttons • Selects the preset station (or service) if pressed, or store a station (or a service) if pressed and held. • Selects the tracks while playing an audio CDs or CD Texts. • Selects the folders while playing MP3/WMA discs or an SD card. • Selects the discs while operating the CD changer. 6 ANGLE button • Adjusts the control panel angle. 7 BAND button • Selects the band for FM/AM and DAB. 8 4 / . buttons • Searches for stations (or ensembles) if pressed, or skips frequencies after pressed and held. • Changes the tracks of the disc or of the SD card if pressed. • Fast-forwards or reverses the track if pressed and held. ENGLISH Getting started ENGLISHBasic operations ~ Y You cannot select some sources if they are not ready. ! • For FM/AM tuner only • For DAB tuner only . Adjust the volume. To show the level meter (see page 36). @ Adjust the sound as you want. (See pages 25 – 28.) To drop the volume in a moment (ATT) To restore the sound, press it again. To turn off the power Canceling the display demonstrations If no operations are done for about 20 seconds, display demonstration starts. [Initial: Demo]—see page 34. 1 Enter the PSM menu (see page 5). 2 Select “Off.” • Make sure “Demo/Link” is shown on the display. If not, press 5 or .. 3 Exit from the setting. To activate the display demonstration In step 2 above, select “Demo” or “Image Link.” For more details, see page 34. Setting the clock 1 Enter the PSM menu (see page 5). 2 Set the hour, minute, and clock system. 1 Select “Clock Hr” (hour), then adjust the hour. 2 Select “Clock Min” (minute), then adjust the minute. 3 Select “24H/12H,” then select “24Hours” or “12Hours.” 3 Exit from the setting. To check the current clock time when the power is turned off ENGLISH Radio operations ENGLISHListening to the radio To tune in to a station manually ~ In step ! on the left... 1 Y 2 Select the desired station frequencies. Clock display ! Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again. Note: FM1 and FM2: 87.5 MHz – 108.0 MHz FM3: 65.00 MHz – 74.00 MHz When an FM stereo broadcast is hard to receive 1 Enter the MODE menu (see page 5). 2 Select “Mono.” 3 Select “On.” Reception improves, but stereo effect will be lost. 4 Exit from the setting. To restore the stereo effect, repeat the same procedure and select “Off” on step 3. Storing stations in memory You can preset six stations for each band. FM station automatic presetting — SSM (Strong-station Sequential Memory) 1 2 Select the FM band (FM1 – FM3) you want to store into. 3 Enter the MODE menu (see page 5). 4 Select “SSM.” 5 Local FM stations with the strongest signals are searched and stored automatically in the FM band. ENGLISH ENGLISH Manual presetting Ex.: Storing FM station of 92.5 MHz into the preset number 4 of the FM1 band. 1 2 3 • By holding 5/., the Preset Station List will also appears (see step 7 below). 4 Enter the MODE menu (see page 5). 5 Select “List.” 6 7 Select a preset number. • If the current band is FM, you can move to the lists of the other FM bands (except FM3) by pressing 4/.. 8 Store the station. Listening to a preset station 1 2 3 Perform steps 4 to 7 (on left column) to enter the Preset Station List. 4 FM RDS operations ENGLISHSearching for your favorite FM RDS programme You can tune in to a station broadcasting your favorite programme by searching for a PTY code. • To store your favorite programme, see page 14. ~ Y Select a PTY code. ! Start searching for your favorite programme. If there is a station broadcasting a programme of the same PTY code as you have selected, that station is tuned in. • You can move to the other lists by pressing 4/.. ENGLISH What you can do with RDS RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. By receiving the RDS data, this receiver can do the following: • Programme Type (PTY) Search (see page 13) • Temporarily switches to Traffic Announcement—TA Standby Reception. (See page 15.) • Temporarily switches to your favorite programme—PTY Standby Reception. (See pages 14 – 16, and 36.) • Tracing the same programme a...