Log:
Assessments - 3, GPA: 4 ( )

Instruções de Operação Combi, Modelo Centre ST 8065

Fabricante : Combi
Arquivo Tamanho: 4.83 mb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



Facilidade de uso


See Section 11 for more information on suitable vehicle belts. Any extra support used to hold the car seat up must not interfere with the Vehicle Belts. Locking Clip 37 SECTION 10 Installing the Car Seat without the Base 38 SECTION 10 Installing the Car Seat without the Base LAP ONLY BELT To install with a Lap only belt pass the belt from one side of the carseat to the other. Fit the belt under the lugs in front of the handle. Pull the belt tight! LAP/SHOULDER BELT To install with a Lap/shoulder belt pass the Lap belt from one side of the carseat to the other. Fit the belt under the lugs in front of the handle. Fit a Locking Clip to the Lap and Shoulder belts just above the vehicle belt latch. Pull the belts tight! NOTE: A Locking Clip MUST be used with a Lap/Shoulder belt with a tongue that moves freely along the belt, or with a Lap/shoulder belt where the Lap portion of the belt cannot be tightly secured. LOCKING CLIP A Locking Clip is supplied with the car seat and is stored at the back of the carseat. To fit the Locking Clip, first fit to the Lap Belt as shown opposite, then fit the Shoulder Belt through the Locking Clip over the top of the Lap belt. Keep the belts tight! WARNING: If the Locking Clip is not used where required, the car seat will not be held securely in place. Remove Locking Clip from the vehicle belt when not in use. DO NOT use the Locking Clip as a vehicle belt shortener. Locking Clip 37 SECTION 10 Installing the Car Seat without the Base 38 SECTION 10 Installing the Car Seat without the Base LAP ONLY BELT To install with a Lap only belt pass the belt from one side of the carseat to the other. Fit the belt under the lugs in front of the handle. Pull the belt tight! LAP/SHOULDER BELT To install with a Lap/shoulder belt pass the Lap belt from one side of the carseat to the other. Fit the belt under the lugs in front of the handle. Fit a Locking Clip to the Lap and Shoulder belts just above the vehicle belt latch. Pull the belts tight! NOTE: A Locking Clip MUST be used with a Lap/Shoulder belt with a tongue that moves freely along the belt, or with a Lap/shoulder belt where the Lap portion of the belt cannot be tightly secured. LOCKING CLIP A Locking Clip is supplied with the car seat and is stored at the back of the carseat. To fit the Locking Clip, first fit to the Lap Belt as shown opposite, then fit the Shoulder Belt through the Locking Clip over the top of the Lap belt. Keep the belts tight! WARNING: If the Locking Clip is not used where required, the car seat will not be held securely in place. Remove Locking Clip from the vehicle belt when not in use. DO NOT use the Locking Clip as a vehicle belt shortener. 39 Section 11 Vehicle Belt Systems 40 Section 11 Vehicle Belt Systems WARNING DEATH or SERIOUS INJURY can occur Not all vehicle seat belts can be used with a car seat. The car seat must be held tight at all times by a lap belt (or the lap portion of a lap/shoulder belt) that will not loosen while driving. To provide a secure installation in the vehicle: .Read the Owners Manual regarding car seat installation and vehicle seat belt use with a car seat, .Follow all instruction labels on vehicle seat belt and car seat. If the car seat does not stay tightly secured after following instructions: .Move car seat to another location in the vehicle, or .Contact vehicle dealer for assistance, or .See page 6 of this manual for other sources of aassistance. BELTS FORWARD OF SEAT BIGHT Vehicle seat belts located forward of the seat bight may not hold the car seat securely. Check vehicle Owners Manual or see vehicle dealer for car seat installation instruction. If seating position is approved for use with car seat, install car seat and check for secure installation by pulling car seat front to back. If car seat slides forward or vehicle seat belt does not stay tight, DO NOT use these seat belts. Seat Bight Belt forward of seat bight Buckle forward of seat bight Seat Bight 39 Section 11 Vehicle Belt Systems 40 Section 11 Vehicle Belt Systems WARNING DEATH or SERIOUS INJURY can occur Not all vehicle seat belts can be used with a car seat. The car seat must be held tight at all times by a lap belt (or the lap portion of a lap/shoulder belt) that will not loosen while driving. To provide a secure installation in the vehicle: .Read the Owners Manual regarding car seat installation and vehicle seat belt use with a car seat, .Follow all instruction labels on vehicle seat belt and car seat. If the car seat does not stay tightly secured after following instructions: .Move car seat to another location in the vehicle, or .Contact vehicle dealer for assistance, or .See page 6 of this manual for other sources of aassistance. BELTS FORWARD OF SEAT BIGHT Vehicle seat belts located forward of the seat bight may not hold the car seat securely. Check vehicle Owners Manual or see vehicle dealer for car seat installation instruction. If seating position is approved for use with car seat, install car seat and chec...

Este manual também é adequado para os modelos :
Os assentos de carro - Centre DX 8074 (4.83 mb)
Os assentos de carro - Centre EX 8086 (4.83 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias