Assessments - 2, GPA: 4 ( )

Fabricante : Graco Arquivo Tamanho: 1 mb Arquivo Nome : Língua de Ensino:

For a vehicle with a front passenger air bag, refer to your vehicle owner’s manual as well as these instructions for booster seat installation. • NEVER LEAVE YOUR CHILD UNATTENDED. • NEVER LEAVE A BOOSTER SEAT UNSECURED IN YOUR VEHICLE. An unsecured booster seat can be thrown around and may injure occupants in a sharp turn, sudden stop or crash. Remove it or make sure that it is securely belted in the vehicle. • REPLACE THE BOOSTER SEAT AFTER AN ACCIDENT OF ANY KIND. An accident can cause damage to the booster seat that you cannot see. • DO NOT MODIFY YOUR BOOSTER SEAT or use any accessories or parts supplied by other manufacturers. • NEVER USE BOOSTER SEAT IF IT HAS DAMAGED OR MISSING PARTS. DO NOT use a cut, frayed or damaged vehicle seat belt. 7 • THE BOOSTER SEAT CAN BECOME VERY HOT IF LEFT IN THE SUN. Contact with these parts can burn your child’s skin. Always touch the surface of any metal or plastic parts before putting your child in the booster seat. • THIS CHILD RESTRAINT CONFORMS to all applicable Federal Motor Vehicle Safety Standards and is certified for use in motor vehicles. This restraint is NOT certified for use in aircraft because there is no shoulder belt available. • NEVER GIVE THIS BOOSTER SEAT to someone else without also giving them this manual. • NEVER USE A SECOND-HAND BOOSTER SEAT or a booster seat whose history you do not know. • NEVER USE THIS BOOSTER SEAT without the armrests attached to the base. 8 Assembling the Booster Seat Step 1. Insert armrest into base as shown until buttons snap into slots on side of base 1 . Step 2. Select the desired armrest height for your child, then insert the height adjustment screw 2 and tighten. Repeat for other armrest. Step 3. To adjust armrests, remove screw and press in button on side of base as shown to raise or lower 3 . Reinsert screw and tighten. CHECK to make sure armrests are securely attached by pulling up on them. SNAP! 1 9 2 3 Step 4. Slip armrest covers (on certain models) onto armrests as shown. Step 5. Your Graco booster seat is now ready to use. See page 29, “Securing Child in Vehicle with Shoulder Belt Positioning Clip”. FOR MODELS with a back support continue on to Step 6. 10 SNAP! 2 SNAP! 2 Assembling the Back Support (on certain models) Step 6. Flip head support and lower back support over as shown . 1 1 Step 7. Squeeze red adjustment button and slide two pieces together until they snap into place . CHECK to make sure two pieces are securely snapped together by pulling on them. 2 11 Step 8. Attach elastic strap as shown 3 .3 3 Step 9. Flip seat over and insert the fabric from the head support underneath the fabric on the lower back support as shown . To make insertion of fabric easier, slide the upper and lower back pieces apart by squeezing the red adjustment 4 12 button. 4 5 Step 10. Attach backrest to base. “U”-shaped hooks on bottom of backrest will interlock with bars on base . Make sure that no part of the seat covering interferes when attaching backrest to the base. 13 5 Step 11. Once backrest is securely attached to the base, push backrest up as shown .6 6 14 Step 12. Your Graco booster seat is now ready to use. See page 21-27, “Using your Graco Booster Seat” and “Securing Your Ch...

Baixe o seu

Para fazer o download, introduza 2 dígitos :