Assessments - 9, GPA: 3.7
(
)
)
|
Facilidade de uso
— Pressing DIR changes the unit to Tape Play mode. — Pressing CD changes the unit to CD Changer Play mode. If you switch modes with these buttons, the unit does not turn off at the turn-off time of the timer. Toswitchto CD/MD IN mode, press DIR, CD, or BAND before connecting a portable CD/MD player, etc. to the CD/MD IN jack. “rAPE PLAYBACK ,3 1 DIR 1 Press OPEN to open the front panel and insart a cassette. Playback starts in the direction that the unit played back previously. A (eject) button z Close the front panel. Tape running indicator 3 Adjust the volume with +/-. Notes l If a cassette is already inserted, press DIR to start playback. l Elesure to close the front panel after inserting or ejecting a cassette. mm ENGLISH 10 TAPE PLAYBACK Press the following buttons to operate tape transport. To do this Press this button Eject the cassette Change the playback side Stop fast-forwarding or rewinding and resume playback Fast-forward either side of the tape Rewind either side of the tape Stop the tape and turn the unit off (for more than 2 seconds) l At the end of the tape in Fast Forward mode, the other side of the cassette will start playing automatically. l At the end of the tape in Rewind mode, the same side will start playing automatically. Direction indications FI,I,IKI Displayed when the upper side of the cassette is being played. l@J Displayed when the lower side of the cassette is beina daved. Tape transport display When you start tape playback, the transport display indicates the tape movement. Upper side: During playback, fast-fowarding H ~=:~ Lower side: During rewinding ~ ‘y ‘~ Lower side: During playback, fast-fowarding %“%;4 r’; +-&-4 LJmer side: Durina rewindinq 9“ ““””s ‘“’ During fast-forwarding or rewinding, the transport display accelerates. Beforeturningthe ignitionoff Be sure to eject any cassette from the unit before turning the ignition off. Switching modes When the unit is in Radio or CD Changer Play mode, inserting a cassette switches the unit to Tape Play mode automatically. To prevent tape problems Before inserting a cassette into the unit, make surethatthereisnoslackinthetape. Ifnecessary, take up the slack by inserting a pencil into the spindle hole and winding. Tapes of 90 minutes or longer are extremely thin and easily deformed or damaged. They are not recommended. MS 00MTL BL REW FF To play tapes recorded with Dolby B NR Press DD (the Dolby NR button) when playing a tape recorded in this mode, The “on B indicator lights up. Press this button again to cancel this mode. Note If a tape recorded without Dolby B NR is played back in Dolby B NR mode, the sound will not be reproduced properly, To play metal tapes Press MTL (metal) when playing a metal or CrO, tape. The “MTL” indicator lights up. Press this button again to cancel this mode. 11 ENGLISH Note If you play a normal tape in Metal mode, the sound will not be reproduced properly. Music sensor function By using this function, you can fast-forward or rewind the tape to the beginning of the next or current track, from which the tape playback will resume automatically. 1. Press MS to stand by for the music sensor function. The “MS” indication appears. 2. To search for the beginning of the next track, press FF. To search for the beginning of the current track, press REW. The “MS” indication flashes during scaning. To cancel this function, press MS again. Note There must beat least a 4-second blank between the tracks for this function to be activated correctly. Blank skip function By using this function, when the unit detects a blank portion longer than 12 seconds between tracks, it automatically fast forwards the tape to the beginning of the next track. Press BL to activate this function. The “BL” indication appears. The indication flashes during scanning the next track. To cancel this function, press BL again. l If the end of the tape is reached during fast- forwarding, the unit switches to the other side of the tape and continues fast-forwarding. SOUND ADJUSTMENTS 21 MUTE ][ Press SEL to select the mode that you wish to adjust from: VOL (volume), BASS (bass), TRE (treble), BAL (balance) and FAD (fader). The following indicators appear in cyclic order. !..UI...?’EFI=+”TFE+ 1111....-+’l%q If you do not proceed with step 2 within 5 seconds, the selected mode is canceled, and the indication returns to the current source mode. 2 Press +/– to adjust the level. Press and hold either button to change the level rapidly. + — Decreases the Increases the [...l~l”.” volume level volume level .,,... .. .. ..... .. Decreases the Increases the .,,,.. ..c..,... 1“,.,11. ... .... ... ... basslevel bass level Decreases the Increases the “’WE treble level treble level I Decreases the Decreases the 1111,,,. level of the right level of the left s~eaker(s) s~eaker(s) Decreases the level of the rear speakers Without selecting any mode with SEL, only the volume level can be adjusted by pressing +1–. MUTE button Plressthis button to temporarily lower t...