Assessments - 3, GPA: 5
(
)
)
|
Facilidade de uso
This function can be turned ON or OFF from the head unit by following procedure below. 1 Press and hold the INTLZ button for at least 2 seconds. 2 Press the f UP button to select the MUTE mode. Each press changes the modes as shown: > DIM > SUBW > BEEP > MUTE DEMO < AUX < SCR < NOTE If you press the DN g button the display scrolls in reverse sequence. 3 Press the TUNE button to turn on or off the Mute mode. Each press toggles between the MUTE ON and OFF modes. NOTE The initial setting at the factory is "MUTE ON". 4 Press and hold the INTLZ button for more than 2 seconds again to return to normal operation. CD Text Scroll Setting This CD player has the ability to scroll the disc and track name recorded on CD-Text discs. The scrolling feature will work with names greater than 8 characters. 1 Press and hold the INTLZ button for at least 2 seconds. 2 Press the f UP button repeatedly to select "SCR". Each press of the f UP button changes the modes as shown: > DIM > SUBW > BEEP > MUTE DEMO < AUX < SCR < NOTE If you press the DN g button the display scrolls in reverse sequence. 3 Press the TUNE button to toggle mode between SCR AUTO and MANU. • SCROLL AUTO: the display of CD text is scrolled continuously. • SCROLL MANUAL: the display is scrolled only when a disc is loaded or when a track is changed. 4 When the setting is completed, press and hold the INTLZ button for more than 2 seconds to return to the normal mode. NOTES • Initial mode is "SCR MANU". • The unit scrolls only CD text names. The disc titles input manually (refer to page 11) cannot be scrolled. 7-EN n MODE INTLZ/DISP SOURCE A.PROC BLACK OUT TUNE DN gf UP Setting the AUX Mode You can input TV/video sound by connecting an optional Ai-NET/RCA Interface cable (KCA-121B) to this component. 1 Press and hold the INTLZ button for more than 2 seconds. 2 Press the f UP button repeatedly to select "AUX" . Each press of the f UP button changes the modes as shown: NOTE If you press the DN g button the display scrolls in reverse sequence. > DIM > SUBW > BEEP > MUTE > SCR DEMO < AUX (AUX Mode Display Setting.) < . Displayed after AUX ON is set. 3 Press the TUNE button to toggle the mode between AUX ON and AUX OFF. NOTES • The initial setting at the factory is AUX OFF. • You can set the AUX mode display by pressing the DN g or f UP button after AUX ON is set, select the AUX mode display setting, and then press the TUNE button. 4 Press the INTLZ button for at least 2 seconds to activate the normal mode. 5 To adjust the volume, etc., first press the SOURCE button and select the AUX mode, then make the necessary adjustment. > TUNER > CD > AUX NOTE When AUX ON is selected, you cannot select the changer to be used even for a connected changer. 8-EN Demonstration This unit has the Demonstration feature which simulates the display functions on the display panel. 1 Press and hold the INTLZ button for at least 2 seconds. 2 Press the f UP button to select the DEMO mode. Each press changes the modes as shown: > DIM > SUBW > BEEP > MUTE DEMO < AUX < SCR < NOTE If you press the DN g button the display scrolls in reverse sequence. 3 Press the TUNE button to turn on or off the DEMO mode. Each press toggles between DEMO ON and DEMO OFF. If no buttons are pressed 30 seconds after the DEMO mode is turned ON, "DEMO" blinks 3 times in the display. The DEMO mode then begins. NOTE The initial setting at the factory is "DEMO OFF". 4 Press and hold the INTLZ button for more than 2 seconds again to return to normal operation. Adjusting the built -in Audio Processor You can change the Bass/Treble Frequency emphasis, High Pass Filter, Low Pass Filter, and Sub Woofer Phase on this unit, so that you can create your favorite sound effects. 1 Press the A.PROC button for more than 3 seconds to enter Bass/Treble parameter setting mode. 2 Within 5 seconds, press the DN g or f UP button repeatedly to select the desired parameter. >.BC or BW DEFP < SUBW < > TC > HPLP < . Each time you press the MODE (Audio Control) knob, the BC and BW change alternatery. 3 Press the MODE (Audio Control) knob to toggle between the BC and BW. 1. BC (Setting the Bass Frequency): > 60Hz > 70Hz > 80Hz > 90Hz 180Hz < 150Hz < 130Hz < 100Hz < Emphasizes the displayed Bass frequency ranges. 2. BW (Setting the Bass Band Width): (Q-Factor) > WIDE1 > WIDE2 > WIDE3 > WIDE4 (Narrow) <.................................> (Wide) Changes the displayed frequency’s band width to narrow or wide. NOTE A narrow or wide wave pattern on the display will indicate the selected band width. 3. TC (Setting the Treble Frequency): > 10.0kHz > 12.5kHz > 15.0kHz > 17.5kHz Emphasizes the displayed treble frequency ranges. 4. HP (Setting the High Pass Filter): > OFF > 80Hz > 120Hz > 160Hz Outputs all frequencies higher than that selected according to your preference. 5. LP (Setting the Low Pass Filter): > OFF > 160Hz > 120Hz > 80Hz Outputs all frequencies lower than that selected according to your preference. (Only available when using the subwoofer outp...
Este manual também é adequado para os modelos :Unidade - CDA-7965 (649.18 kb)
Unidade - CDA-7863 (649.18 kb)
Unidade - CDA-7862 (649.18 kb)