Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
To cancel, press BACK. The channel can now be recalled at any time by pressing that preset. Channel Guide: When pressed, a channel list is displayed with the current channel in play highlighted. Use the up/down arrows and scroll bar on the right to view the available XM radio channels. Enter the number corresponding to a desired XM channel using the keypad, and then press the check mark ( ) to tune to that frequency. 31 SWC (Steering Wheel Control) SWC (Steering Wheel Control) SWC Menu The ADVUV630 is compatible with the PAC (Pacifi c Accessory Corporation) steering wheel control adapter SWI-PS. A 3.5mm female connector (labeled “SWC”) on the back of the head unit allows connectivity to the PAC adapter. Please refer to the instructions included with the PAC adapter for detailed installation information. The steering wheel control option allows you to program your existing steering wheel controls to work with the ADVUV630. Accessing the “SWC” Menu: To access SWC mode, select the “SWC” icon on page 2 of the Main Menu. NOTE: Before you begin, you MUST press the button to clear any prior programming options. If a mistake is made during the programming sequence, press the button to clear all settings and start over. Otherwise, the steering wheel control function may not function properly. Programming Keys 1-7: 1. Press the button to clear any existing program settings. 2. Touch the option (N/A) next to each Key number to open a window with possible programming options (use the up/down arrow buttons on the right side of the screen to view additional Key choices). 3. Use the up/down arrows to navigate the list. Touch to select the desired function for the selected Key number. 4. Continue with Key 1 - Key 7 (Keys +1 through +7 are reserved for future use). 5. After selecting a desired function for each Key (1-7), press the button to begin programming your choices to the buttons on your steering wheel control. Follow the on-screen commands to complete this process, pressing the left/right arrow buttons to move between Key selections. 32 System Settings Menu System Settings Menu Settings Menu Accessing the “Setup” Menu: Press MENU to access the “Main Menu.” Press Next to view a second page of menu options and then select the Settings icon. Accessing Menu Items: Press the submenu feature you wish to adjust (Video, General, etc.). The submenu feature for adjustment will be highlighted. Pressing the feature will display the adjustable parameters. Available menu options are as follows: Video Menu Options: • Aspect Ratio: Choose Full • Rear Camera: The Rear Camera input can be displayed on the unit’s front panel in “Normal View” or a “Mirrored View”. In the “Mirror View” the camera image is reversed as if looking through a rear-view mirror. General Menu Options: • User Interface Color: Choose White, Red, Blue, Amber or Green to determine the accent color for buttons and specific text for on- screen menus. • Tuner Region: Choose the region that corresponds with your location (USA or Europe). • TFT Standby: Select the length of time to pass before the TFT standby feature activates (10 seconds or 20 seconds). • RGB Light: The RGB light illuminates the front panel buttons (eject, PWR-VOL, etc.) There are 8 preset colors and 3 custom color options. Choose the “Scan Color” option to preview the 8 preset color options. Press to select a color. The Edit Color menu allows you to design a custom color. To begin, touch the Edit Color option and then press to highlight Custom 1, 2 or 3. Touch Adjust to open the “Edit Color” window. To choose a custom color, drag across the color bar or input the RGB value using the +/- arrow buttons on the right side of the screen. Touch Initialize to load (factory installed) the original backlight color. • Beep: An audible beep tone occurs when front panel or on-screen control buttons are pressed. The beep tone can be disabled by setting this 33 System Settings Menu System Settings Menu Settings Menu option to “Off.” • Wallpaper: Choose a preferred wallpaper image (Black, Shore Waves, Lotus Flower, Smart Cars, Dense Flowers, User Defined) to be displayed behind the Main Menu options. Select the “User Defined” option to load up to 12 user-defined wallpaper images using the Micro-SD slot located at the top right corner of the front panel (labeled “MAP”). • Calibration: This touch screen calibration adjustment is used to set the parameters of the touch screen to ensure that when the screen is pressed that it corresponds to the feature the user is selecting. To calibrate the screen, first select the Touch Screen Calibration. Press the Yes icon and it will be selected. Follow the instructions on the screen to press and briefly hold the stylus. The stylus will move to each corner of the screen and fi nally to the center. If the screen is pressed the new calibration parameters will be accepted. If the screen is not pressed within the thirty seconds, the new parameters will be disregarded. Time Menu Options...
Este manual também é adequado para os modelos :Unidade - ADVUV630 (1.56 mb)
Unidade - ADVUV630 (1.56 mb)
Unidade - ADVUV630 (1.56 mb)