Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
Changing Audio Modes Press this knob [SEL] to change the audio mode as follows. VOL a BASS a TRE (Volume) (Treble) cd FADE b BAL (Fader) (Balance) Bass and Treble Press the knob to select the BASS or TREBLE mode and then turn it clockwise or counterclockwise to increase or decrease the bass/treble level. -12 to 12 -12 to 12 Power and Sound Controls (continued) Balance Press the knob to select the BALANCE mode and then turn it clockwise or counterclockwise to shift the sound volume to the right or left speakers. or L 1 to 15 Balance Center (R: Right, L: Left) Fader Press the knob to select the FADER mode and then turn it clockwise or counterclockwise to shift the sound volume to the front or rear speakers. or R 1 to 15 Fader Center (F: Front, R: Rear) Note: In the audio mode (BASS/TRE/BAL/FADE), the display will return to regular operation mode when there is no input for more than 5 seconds (2 seconds in the VOL mode). 5500UFEW l k S•HDB (Super High Definition Bass) (Only for CQ-5500U) This featare enhances bass definition. Press and hold [MUTE] (S•HDB) for more than 2 seconds to activate high-defintion bass. Press and hold Press and hold [MUTE] (S•HDB) for more than 2 seconds to cancel. 5500UFEW l k Press and hold Tone Enhancement (Loudness) (Only for CQ-5300U) Press and hold [MUTE] (LOUD) for more than 2 seconds to enhance bass and treble tones when listening at low or medium volume. Press and hold [MUTE] (LOUD) for more than 2 seconds again to deactivate when listening at higher volumes. Power and Sound Controls (continued) Mute Press [MUTE] to mute the sound completely. Press [MUTE] again to cancel.5500UFEW l k SS/TREB/BAL/FADER Selecting Auxiliary Source (Only for CQ-5500U) Press and hold [MODE] (AUX) for more than 2 seconds to select AUX Input mode. Press and hold Connect the auxiliary equipment (any other appropriate equipment) to AUX IN Connector. Canceling AUX Input mode Press [MODE] (AUX) to resume the previous mode. Radio Basics 5500UBASS/TREB/BAL/FADER FEW l k SS/TREB/BAL/FADER Mode Selection Press [MODE] to change the operation mode as follows. Radio a Compact Disc a CD Changer (when connected) (Only for CQ-5500U) c d Press and hold [MODE] for more than 2 seconds. AUX (Only for CQ-5500U) To change to the tuner mode In case of CD changer mode or CD mode, press [MODE]. Selecting a Band Press [BAND] to change the band setting as follows. FM1 a FM2 a W/B a AM (Weather Band) cd "ST" indicator lights when FM stereo broadcast available. SS/TREB/BAL/FADER ASS/TREB/BAL/FADER l FEW k 5500U Hold and release l FEW k 5500U Manual Tuning Press [TUNE j jj] or [TUNE i ii] to tune in a higher or lower frequency. Seek Tuning Press and hold [SEEK j jj] or [SEEK i ii] for more than 0.5 seconds, then release it. Seek tuning will automatically stop when a signal of the next broadcast station is received. Radio Basics (continued) Station Preset FM1, FM2 and AM can save maximum 6 stations each in their preset station memories. Caution: To ensure safety, never attempt to preset stations while you are driving. ASS/TREB/BAL/FADER d 5500UFEW l k d Manual Station Preset Press [BAND] to select a desired band. Use manual or seek tuning to find a station to be stored in the preset memory. Press and hold one of the preset buttons [1] to [6] until the display blinks once. Preset Number Note: You can change the memory setting by repeating the above procedure. ASS/TREB/BAL/FADER Press and hold Press and hold Auto Station Preset Select a band and press and hold [BAND] (APM: Auto Preset Memory) for more than 2 seconds. The 6 strongest available stations will be automatically saved in the memory on preset buttons [1] to [6]. Once set, the preset stations are sequentially scanned for 5 seconds each. Notes: In the case of Auto Station Preset mode, only FM2 is available for FM stations. (FM1 is not available.) Auto Station Preset is not activated in Weather Band. Any stations preset previously on the selected band will be erased. Tuning in a Preset Station Press the corresponding preset buttons [1] to [6] to tune in a preset station. Tuning in a Weather Band Station Press any of the buttons [1] to [6] to monitor the preset station. The frequency (162) remains unchanged. Note: The weather band (CH1-6) has been preset. CH7 is selected by pressing [jj] or [ii]. WB Weather Band Frequency Channel Number Weather Band Stations National Weather Radio Broadcasts from over 380 locations throughout the U.S. on seven VHF/FM frequencies. Tune to weather band to receive continuous weather information 24 hours a day on one of the following frequencies. 1. 162.550 MHz 2. 162.400 MHz 3. 162.475 MHz 4. 162.425 MHz 5. 162.450 MHz 6. 162.500 MHz 7. 162.525 MHz Occasionally the frequency of an existing or planned station must be changed because of unexpected radio frequency interference with adjacent NOAA Weather Radio Stations and/or with other Government or Commercial Operations within the area. If you have a question concerning NOAA Weather Radio...