Assessments - 2, GPA: 4.5
(
)
)
|
Facilidade de uso
9 ENGLISH To cancelthe timer To cancel program 1, press TUNE 7 or TUNE A repeatedly until the “PRG1 OFF indication flashes in step 2. To cancel program 2, press TUNE Y or TUNE A repeatedly until the “PRG2 OFF” indication flashes in step 4. Noles l When you preset two programs, be sure that they do not overlap. l Even if the unit is in a mode other than Radio mode, the unit switches to Radio mode and tunes in the preset radio program at the preset time automatically. When the program is over, the unit returns to the former mode automatically. l When this function is activated, TUNE 7/A, A. ME, LO and the preset number buttons do not work for tuning in stations. l Even if you are listening to a radio program with this function, pressing the following buttons switches the unit to other mode: — Pressing BAND changes the unit to Radio mode. — Pressing DIR changes the unit to Tape Play mode. — Pressing CD changes the unit to CD Changer Play mode. If you switch modes with these buttons, the unit does not turn off at the turn-off time of the timer. To switch to CD/MD IN mode, press DIR, CD, or BAND before connecting a portable CD/MD player, etc. to the CD/MD IN jack. Press the following buttons to operate tape TAPE PLAYBACK 3 1 DIR 1 1 Press OPEN to open the front panel and insert a cassette. Playback starts in the direction that the unit played back previously. A (eject) button 2 Close the front panel, Tape running indicator 3 Adjust the volume with +/-. Notes l If a cassette is already inserted, press DIR to start playback. l Be sure to close the front panel after inserting or ejecting a cassette. transporl. To do this Press this button Eject the cassette Change the playback side Stop fast-forwarding or rewinding and resume playback Fast-forward either side of the tape Rewind either side of the tape Stop the tape and turn @ the unit off (for more than 2 seconds) l At the end of the tape in Fast Forward mode, the other side of the cassette will start playing automatically. l At the end of the tape in Rewind mode, the same side will start playing automatically. Direction indications F~J] Displayed when the upper side of the p~i’ Displayed when the lower side of the = Tape transport display When you start tape playback, the transport display indicates the tape movement. Upper side: During playback, fast-fowarding Lower side: During rewindina Lower side: During playback, fast-fowarding Upper side: During rewinding During fast-forwarding or rewinding, the transport display accelerates. Before turning the ignition off Be sure to eject any cassette from the unit before turning the ignition off. mm ENGLISH 10 TAPE PLAYBACK SOUNDADJUSTMENTS Switching modes 22 When the unit is in Radio or CD Changer Play mode, inserting a cassette switches the unit to Tape Play mode automatically. To preventtapeproblems Before inserting a cassette into the unit, make sure that there is no slack in the tape. If necessary, take up the slack by inserting a pencil into the MUTE spindle hole and winding. Tapes of 90 minutes or longer are extremely thin 1 Press SEL to select the mode that you and easily deformed or damaged. They are not wish to adjust from: VOL (volume), recommended. BASS (bass), TRE (treble), BAL (balance) and FAD (fader). The following indications appear in cyclic order. If you do not proceed with step 2 within 5 seconds, the selected mode is canceled, and the indication returns to the current source mode. 2 Press +/– to adjust the level. Press and hold either button to change the level rapidly. + Decreases the Increases the volume level volume level Decreases the Increases the bass level bass level Decreases the Increases the treble level treble level Decreases the Decreases the level of the right level of the left speaker(s) speaker(s) Decreases the Decreases the level of the front level of the rear speakers speakers Without selecting any mode with SEL, only the volume level can be adjusted by pressing +/–. MUTE button Press this button to temporarily Iowerthevolume. Press it again to restore the previous volume. 11 ENGLISH You can adjust the position of sound stage and tone balance to best serve a particular seat just by pressing DRV. DRV Press DRV to change the position of sound stage. Each time you press DRV, the sound stage changes as follows. FL For the front left seat = R For the front right seat Note When DRV is activated, you cannot adjust BAL (balance), FAD (fader), BASS (bass) and TRE (treble) modes. You can enjoy music with strong bass sound. H-BASS Press H-BASS to obtain powerful bass. Each time you press H-BASS, the bass sound level changes as follows. OFF L H-BASS 1 LOW J H-BASS 2 Medium J. H-BASS 3 High [ When H-BASS is activated, the” -” indicator lights up, ENGLISH 12 CD CHANGER PLAY (CT-FX729M only) You can play discs with this unit by connecting the optional AIWA ADC-EX1 06, ADC-M60 CD changer. Make sure that the disc magazine loaded with the discs is inserted in the connected CD changer. To install the un...
Este manual também é adequado para os modelos :Unidade - CT-FX719 (2.83 mb)