Assessments - 6, GPA: 3.7
(
)
)
|
Fotos e especificações JVC KD-DV6207 |
Facilidade de uso
player, External input [24]. • EXT IN : To use any other external component than the above, [25]. TAG DISP • TAG ON [Initial] Tag display • TAG OFF REAR SPK*6 Rear speaker output • ON [Initial] • OFF AMP GAIN Amplifier gain control • LOW PWR • HIGH PWR [Initial] IF BAND Intermediate frequency filter • AUTO [Initial] • WIDE : Shows the tag while playing MP3/WMA/WAV tracks. : Cancels. : Select this to turn on the rear speaker output. : Cancels. : VOL 00 – VOL 30 (Select if the maximum power of each speaker is less than 50 W to prevent the speaker from being damaged.) : VOL 00 – VOL 50 : Increases the tuner selectivity to reduce interference noises between adjacent stations. (Stereo effect may be lost.) : Subject to interference noises from adjacent stations, but sound quality will not be degraded and the stereo effect will remain. *1 Only for RDS FM preset stations. *2 Depending on the “AMP GAIN” setting. *3 Displayed only when DAB tuner is connected. *4 Some characters or symbols will not be shown correctly (or will be blanked) on the display. *5 Displayed only when one of the following sources is selected—FM, AM, DISC, USB, or LINE IN. *6 Displayed only when Dual Zone is activated (see page 26). 30 Disc setup menu Disc setup menu These operations are possible on the monitor using the remote controller. ENGLISH ~Enter the disc setup menu while stop. YSelect a menu. !Select an item you want to set up. . Select an option. To return to normal screen Menu Item Setting LANGUAGE MENU LANGUAGE Select the initial disc menu language. Refer also to “Language codes” on page 39. AUDIO LANGUAGE Select the initial audio language. Refer also to “Language codes” on page 39. SUBTITLE Select the initial subtitle language or remove the subtitle (OFF). Refer also to “Language codes” on page 39. ON SCREEN LANGUAGE Select the language for the on screen display. Continued on the next page 31 SETTINGS ENGLISHMenu Item Setting PICTURE MONITOR TYPE Select the monitor type to watch a wide screen picture on your monitor. OSD POSITION Select the on-screen bar position on the monitor. • 1 : Higher position • 2 : Lower position (Guidance below the disc setup menu will disappear.) FILE TYPE Select the file type to play. • AUDIO : Play MP3/WMA/WAV files. • VIDEO : Play DivX/MPEG Video files. AUDIO DIGITAL AUDIO OUTPUT Select the signal format to be emitted through the DIGITAL OUT (Optical) terminal. • OFF : Cancels. • PCM ONLY : Select for an amplifier or a decoder incompatible with Dolby Digital, DTS, MPEG Audio, or connecting to a recording device. • DOLBY DIGITAL/PCM : Select for an amplifier or a decoder compatible with Dolby Digital. • STREAM/PCM : Select for an amplifier or a decoder compatible with Dolby Digital, DTS, and MPEG Audio. DOWN MIX When playing back a multi-channel disc, this setting affects the signals reproduced through the LINE OUT jacks (and through the DIGITAL OUT terminal when “PCM ONLY” is selected for “DIGITAL AUDIO OUTPUT”). • SURROUND COMPATIBLE : Select to enjoy multi-channel surround audio by connecting an amplifier compatible with Dolby Surround. • STEREO : Normally select this. D. RANGE COMPRESSION You can enjoy a powerful sound at low or middle volume levels while playing a Dolby Digital software. • AUTO : Select to apply the effect to multi-channel encoded software (excluding 1-channel and 2-channel software). • ON : Select to always use this function. OTHERSDivX REGISTRATION This unit has its own Registration Code. Once you have played back a disc in which the Registration Code recorded, this unit’s Registration Code is overwritten for copyright protection. Menu Item Setting PICTURE MONITOR TYPE Select the monitor type to watch a wide screen picture on your monitor. OSD POSITION Select the on-screen bar position on the monitor. • 1 : Higher position • 2 : Lower position (Guidance below the disc setup menu will disappear.) FILE TYPE Select the file type to play. • AUDIO : Play MP3/WMA/WAV files. • VIDEO : Play DivX/MPEG Video files. AUDIO DIGITAL AUDIO OUTPUT Select the signal format to be emitted through the DIGITAL OUT (Optical) terminal. • OFF : Cancels. • PCM ONLY : Select for an amplifier or a decoder incompatible with Dolby Digital, DTS, MPEG Audio, or connecting to a recording device. • DOLBY DIGITAL/PCM : Select for an amplifier or a decoder compatible with Dolby Digital. • STREAM/PCM : Select for an amplifier or a decoder compatible with Dolby Digital, DTS, and MPEG Audio. DOWN MIX When playing back a multi-channel disc, this setting affects the signals reproduced through the LINE OUT jacks (and through the DIGITAL OUT terminal when “PCM ONLY” is selected for “DIGITAL AUDIO OUTPUT”). • SURROUND COMPATIBLE : Select to enjoy multi-channel surround audio by connecting an amplifier compatible with Dolby Surround. • STEREO : Normally select this. D. RANGE COMPRESSION You can enjoy a powerful sound at low or middle volume levels while playing a Dolby Digital software. • AUTO : Select to apply the effect ...