Assessments - 11, GPA: 4.5
(
)
)
|
Fotos e especificações Pioneer DEH-2400UB |
Facilidade de uso
3 Perform the following procedures to set the menu. To proceed to the next menu option, you need to confirm your selection. CLOCK SET (setting the clock) 1 Turn M.C. to adjust hour. 2 Press M.C. to select minute. 3 Turn M.C. to adjust minute. 4 Press M.C. to confirm the selection. FM STEP (FM tuning step) Normally, the FM tuning step employed by seek tuning is 50 kHz. When AF or TA is on, the tuning step automatically changes to 100 kHz. It may be preferable to set the tuning step to 50 kHz when AF is on. ! The tuning step remains at 50 kHz during man ual tuning. 1 Turn M.C. to select the FM tuning step. 50 (50 kHz) — 100 (100 kHz) 2 Press M.C. to confirm the selection. DEMO (demo display setting) 1 Turn M.C. to set the demo display to on or off. 2 Press M.C. to confirm the selection. En 3 English 0202 Section Operating this unit TITLE (multi-language) This unit can display the text information of a compressed audio file even if they are embedded in a Western European or Russian language. ! If the embedded language and the selected language setting are not the same, text information may not display properly. ! Some characters may not be displayed properly. 1 Turn M.C. to select the desired setting. EUR (European) — RUS (Russian) 2 Press M.C. to confirm the selection. QUIT appears. 4 To finish your settings, turn M.C. to select YES. Press to select. # If you prefer to change your setting again, turn M.C. to switch to NO. Press to select. Notes ! You can set up the menu options in the initial settings. For details about the settings, refer to Initial settings on page 9. ! You can cancel set up menu by pressing SRC/ OFF. Basic operations Important ! Handle gently when removing or attaching the front panel. ! Avoid subjecting the front panel to excessive shock. ! Keep the front panel out of direct sunlight and high temperatures. ! To avoid damaging the device or vehicle interior, remove any cables and devices attached to the front panel before detaching it. 4 En Operating this unit Removing the front panel to protect your unit from theft 1 Press the detach button to release the front panel. 2 Push the front panel upward (M) and then pull it toward (N) you. 3 Always keep the detached front panel in a protection device such as a protection case. Re-attaching the front panel 1 Slide the front panel to the left. Make sure to insert the tabs on the left side of the head unit into the slots on the front panel. 2 Press the right side of the front panel until it is firmly seated. If you cannot attach the front panel to the head unit successfully, make sure that you are placing the front panel onto the head unit correctly. Forcing the front panel into place may result in damage to the front panel or head unit. Turning the unit on 1 Press SRC/ OFF to turn the unit on. Turning the unit off 1 Press and hold SRC/ OFF until the unit turns off. Selecting a source 1 Press SRC/ OFF to cycle between: TUNER (tuner) —CD (built-in CD player) — USB (USB)/ iPod (iPod) — AUX (AUX) Adjusting the volume 1 Turn M.C. to adjust the volume. CAUTION For safety reasons, park your vehicle when removing the front panel. Note When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control terminal, the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the source off. Menu operations identical for set up menu/function settings/audio adjustments/ initial settings/lists Returning to the previous display Returning to the previous list (the folder one level higher) 1 Press . Returning to the ordinary display Canceling the initial setting menu/set up menu 1 Press BAND/ . Returning to the ordinary display from the list 1 Press BAND/ . Tuner Basic operations Selecting a band 1 Press BAND/ until the desired band ( F1, F2, F3 for FM or MW/LW) is displayed. Recalling preset stations 1 Press c or d. ! If MAN (manual tuning) is selected in SEEK, you cannot recall preset stations. You need to select PCH (preset channel) in SEEK. For details about the settings, refer to SEEK (left/right key setting) on page 6. Manual tuning (step by step) 1 Press c or d. ! If PCH (preset channel) is selected in SEEK, you cannot tune up or down manually. You need to select MAN (manual tuning) in SEEK. For details about the settings, refer to SEEK (left/right key setting) on page 6. Seeking 1 Press and hold c or d, and then release. You can cancel seek tuning by briefly pressing c or d. While pressing and holding c or d, you can skip stations. Seek tuning starts as soon as you release c or d. Note This unit’s AF (alternative frequencies search) function can be turned on and off. AF should be off for normal tuning operation (refer to AF (alternative frequencies search) on the next page) . Operating this unit Storing and recalling stations for each band Using preset tuning buttons 1 When you find a station that you want to store in memory, press one of the preset tuning buttons ( 1 to 6) and hold until the preset...
Este manual também é adequado para os modelos :Unidade - DEH-3400UB (4.62 mb)