Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
The display will show a message WELCOME to indicate it is ready to use. Press and hold POWER button on the unit or button on the RC to turn the unit off. After the unit is off, volume level and radio current settings will be memorized, and when you turn the unit on it will resume the stored status you set. Mode selecting Press MODE/ button to select between unit operation modes: AUX => RADIO => DISC => USB => CARD. USB, CARD, DISC modes will only show on the display when a USB device, memory card or a disc is inserted into the unit. Volume control The volume level can be adjusted at any time by rotating VOLUME knob or pressing / buttons on the RC. Mute function Press MUTE/ button to cancel the sound. Press it again or change the volume level to resume the sound. Audio parameter setting Press repeatedly SEL/ button to select bass, treble, balance or fader mode. The corresponding word appears on the display. Rotate VOLUME knob or press / buttons on the RC to adjust the selected parameter. When DSP is on, treble and bass control is not available. Balance is to adjust the balance between the left and right speakers. Fader is to adjust the balance between the rear and front speakers. In each mode, the waiting time is about 5 seconds, and the waiting time is over, it returns to the last display mode of radio or disc playback mode. Beep Press repeatedly SEL/ button to select BEEP ON; rotate VOLUME knob or press / buttons on the RC to toggle between BEEP ON (beep sound will be heard when buttons are pressed) and BEEP OFF, then leave the unit idle for the new setting to take effect. Equalizer modes Press repeatedly SEL/ button to select DSP. Rotate VOLUME knob or press / buttons on the RC to choose an equalizer effect: POP => ROCK => CLASS => FLAT => OFF. After you have reached the desired effect, leave the unit idle in order for the new setting to take effect. Loudness Press repeatedly SEL/ button to select LOUD ON (LOUD OFF). Rotate VOLUME knob or press / buttons on the RC to select between LOUD ON/LOUD OFF. LOUD function is to emphasize the bass output; the word LOUD ON indicates that the LOUD mode is on. Color (option) Press repeatedly SEL/ button to select COLOR1 (COLOR2). Rotate VOLUME knob or press / buttons on the RC to select between COLOR1 (red panel backlight) or COLOR2 (green color backlight). Clock setting The clock can be set anytime when the power is on. Press three times button on the RC or press PTY/CLK button on the unit, then press and hold the button for 3 seconds; Operation the time indication will blink on the display. Rotate VOLUME knob or press / buttons on the RC to adjust hours. Press SEL/ button to go to setting minutes. Rotate VOLUME knob or press / buttons on the RC to adjust minutes. Press button on the RC or PTY/CLK button on the unit for the new setting to take effect. Press button on the RC or PTY/CLK button on the unit anytime to view the time display. Subwoofer control Press and hold the BND/SUB button to turn the subwoofer output ON. An external amplifier is required to operate a subwoofer. AUX in jack AUX-in jack is intended for connecting an external audio or video equipment to amplify the sound. If connection is made correctly, the audio signal from the external source will be translated through the acoustics of the head unit. This enables to adjust the volume and quality of the sounding. For example, you can connect an MP3-player to listen to tracks using the car acoustic system. Radio operations Band select Press repeatedly BAND/SUB button on the panel or button on the RC to select your desired radio band during RADIO mode: FM1, FM2, FM3, AM1 (MW1), AM2 (MW2). In each set of the bands you can store up to 6 preset stations, making total 30 preset memory stations. Auto/Manual tuning Press and hold PREVIOUS/NEXT buttons on the panel or / buttons on the RC to automatically adjust the radio frequency. The radio will seek to the next up or down strong and clear frequency station. Repeat this action to seek for other desired stations. To adjust the needed frequency manually, press repeatedly PREVIOUS/NEXT buttons on the panel or / buttons on the RC. Programming tuner stations There are six numbered preset buttons, under which you can store and recall stations for each band. Select the needed station, then press and hold a preset button. The station will be saved in the memory under the corresponding number. To recall a stored station, press the corresponding preset button. Automatic store/preset scan Automatic store Press and hold F/PS button on the panel or button on the RC. The radio will automatically store the 6 strongest available stations to the 6 preset memories of the current band. To stop auto store, press this button again. Preset scan Press F/PS button on the panel or button on the RC, the receiver will scan the saved stations in the current band. Mono/Stereo control (in FM radio mode) Press SEL/ button until the display shows ST ON (ST OFF). Turn VOLUME knob or press / b...