Assessments - 1, GPA: 5
(
)
)
|
Facilidade de uso
REG OFF: The unit switches to another station, within the same network when the receiving signals from the current station become weak. ( In this mode, the program may differ from the one currently received.) • TA (Traffic Announcement) ALARM/ SEEK TA ALARM: When the tuned station has no TP information for 5 seconds, a double beep sound is output. TA SEEK: When the tuned station does not receive TP information for 5 seconds, the receiver retunes to the next station that has the TP information. • PI (Programme Identification) SOUND/ MUTE PI SOUND: When the frequency of a tuned station switches to an AF (Alternative frequency) with an unidentified PI, it keeps the sound. PI MUTE: When the frequency of a tuned station switches to an AF with an unidentified PI, it mutes the sound until the PI is identified. • CT (Clock Time) ON/ OFF You can use the RDS CT information to update the time. When RDS CT information is not received and then you set CT to OFF, you can adjust the time by yourself. Refer to the page 12 for setting the clock. 3 Operating NEWS FINANCE EASY M AFFAIRS CHILDREN LIGHT M INFO SOCIAL CLASSICS SPORT RELIGION OTHER M EDUCATE PHONE IN JAZZ DRAMA TRAVEL COUNTRY CULTURE LEISURE NATION M SCIENCE DOCUMENT OLDIES VARIED POP M FOLK M WEATHER ROCK M Operating 17 3 Using an USB device (OPTIONAL) 1. Open the USB cover. 2. Connect the USB device. 3. Press SRC repeatedly to select a source to USB. 4. Rotate the volume knob on the unit to adjust the volume. Or press VOLUME W/S on the remote control. Moving to another drive When connecting this unit to multi reader, press BAND on the unit (or DRV on remote control) to go the next drive. Each time you press the button, the driver modes change. Quick Search of a desired fi le You can select and play a desired file regardless of the order in USB. 1. Press the volume knob on the unit. Or press ENTER on the remote control. 2. Rotate the volume knob on the unit to select a desired ROOT or folder and press it. Or press w / s and press ENTER on the remote control. 3. Rotate the volume knob on the unit to select a desired track/ file and press it. Or press w / s and press ENTER on the remote control. Note Playable USB device Requirement • Do not extract the USB device during operation (play, etc.). • An USB device which requires additional programme installation when you have connected it to a computer, is not supported. • Regular back up is recommended to prevent data loss. • If you use a USB extension cable, USB HUB, USB Multi-reader, or external HDD, the USB device may not be recognized. • When you connect a partitioned USB device into the unit, only the first partition is recognized on it. • Some USB device may not work with this unit. • Digital camera and mobile phone are not supported. • USB Port of the unit cannot be connected to PC. The unit cannot be used as a storage device. • Using NTFS file system is not supported. (Only FAT (16/ 32) file system is supported. Operating Other functions are same with "Listening to a CD". Refer to page 12-13. , 18 Troubleshooting Troubleshooting 4 Symptoms Cause Solution Power doesn't turned on. The unit doesn't operate. Leads and connectors are not properly. Confirm once more that all connections are correct. The fuse is blown. Rectify the problem that caused the fuse to blow, and then replace it. Be very sure to install the correct fuse with the same rate. Noise and other factors are causing the built in microprocessor to operate incorrectly. Turn the unit off and then on again. No sound is heard. Cables are not connected correctly. Connect the cables correctly. There's audio skipping. This unit is not firmly secured. Secure this unit firmly. The playback is not possible. The disc is dirty. Clean the disc. The disc of unplayable type is loaded. Check what type the disc. Radio stations cannot be tuned in. The signal strength of the stations is too weak. (when tuning in with automatic tuning.) Tuned in the stations manually. No station has been preset or preset stations have been cleared. (When tuning by scanning preset stations.) Preset the stations. (Refer to the page 15.) The unit does not operate correctly even when the appropriate remote control buttons are pressed. Battery power is low. Load a new battery. Troubleshooting Appendix 19 Specifi cations General Output Power: 53 W x 4 CH (Max.) Power Source: DC 12 V Speaker impedance: 4 . Ground System: Negative Dimensions (W x H x D): 178 x 50 x169 mm (without Control Panel) Net Weight: 1.37 kg TUNER FM Tunning Range: 87.5 to 108.0 MHz S/N Ratio: 55 dB Distortion: 0.7 % Usable Sensitivity: 12 dB.V AM (MW) Tunning Range: 520 to 1720 kHz or 522 to 1620 kHz S/N Ratio: 50 dB Distortion: 1.0 % Usable Sensitivity: 28 dB.V CD Frequency Response: 20 Hz to 20 kHz S/N Ratio: 80 dB Distortion: 0.12 % Channel Separation (1 kHz): 55 dB AUX Frequency Response: 20 Hz to 20 kHz S/N Ratio: 80 dB Distortion: 0.1 % Channel Separation (1 kHz): 45 dB Max Input Level (1 kHz): 1.1 V USB (OPTIONAL)...