“ON”/ “OFF” “VOLUME OFFSET” Sets each source’s volume as a difference from the basic volume. “–8” — “0” (AUX: “–8” — “0” — “+8”) ( : Factory setting) 1 Select the source Press the [SRC] button. Select a source other than “STANDBY”. 2 Enter Function setting mode Press the [VOL] knob. 3 Enter Audio Control mode Turn the [VOL] knob and press it when the desired item is displayed. Select “AUDIO CONTROL”. 4 Select the setting item to adjust Turn the [VOL] knob and press it when the desired item is displayed. 5 Make a setting Turn the [VOL] knob to select a setting value, and then press the [VOL] knob. 6 Exit Function setting mode Press the [ ] button for at least 1 second. . • The “SUB-W PHASE” item can be made when a setting other than “THROUGH” is selected for the “LPF SUBWOOFER” item. Remarks • Supreme Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding at low bit rate (less than 128Kbps, Sampling frequency is 44.1kHz). Supplementing is optimized by compression format (MP3, WMA and AAC) and processed according to bit rate. The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range. 52 | DPX504U/ DPX404U/ DPX304 English | 53 Function of DPX504U DSP Setup SRC 4 . VOL CarTypeSelection You can compensate the delay of the sound arrival time by selecting your environment from the following car types. Display Overview “OFF” Not compensating. “Compact” Compact car “Sedan” Sedan “Wagon” Station wagon “Minivan” Minivan “SUV” Sport-utility vehicle “Passenger Van” Passenger van ( : Factory setting) 1 Select the source Press the [SRC] button. Select a source other than “STDBY”. 2 Enter Function setting mode Press the [VOL] knob. 3 Enter Cabin select mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Audio Control” >“Detailed Setup” > “Car Type”. 4 Select the car type Turn the [VOL] knob to select the car type, and then press the [VOL] knob. 5 Exit Function setting mode Press the [ ] button for at least 1 second. . • You can compensate the distances in more details by using (page 55) function. SpeakerSetting The speaker X’Over is automatically set when the position and size of each speaker are selected from the following items. Speaker “Front” Item “SIZE” Range Speaker Size Front “O.E.M.”, “10cm”, “13cm”, “16cm”, “17cm”, “18cm”, “4x6”, “5x7”, “6x8”, “6x9”, “7x10” “LOCATION” Speaker Location Front “Door”, “On Dash”, “Under Dash” “TWEETER” Speaker Size Tweeter “None”, “Use” “Rear” “SIZE” Speaker Size Rear “None”, “O.E.M.”, “10cm”, “13cm”, “16cm”, “17cm”, “18cm”, “4x6”, “5x7”, “6x8”, “6x9”, “7x10” “LOCATION” Speaker Location Rear • “Door”, “Rear Deck” • “2nd Row”, “3rd Row” (Car Type: “Minivan”, “Passenger Van”) “SubWoofer” “SIZE” Speaker Size Subwoofer “None”, “16cm”, “20cm”, “25cm”, “30cm”, “38cm Over” ( : Factory setting) 1 Select the source Press the [SRC] button. Select a source other than “STDBY”. 2 Enter Function setting mode Press the [VOL] knob. 3 Enter Speaker setting mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Audio Control” >“Detailed Setup” > “Speaker Setting”. 4 Select the item you want to set Operation type Selects the item. Operation Turn the [VOL] knob. Adjust each item. Press the [4] or [.] button. Set the value Press the [VOL] knob. 5 Exit Function setting mode Press the [ ] button for at least 1 second. 54 | DPX504U/ DPX404U/ DPX304 CarTypeFineAdjustments Reference point Adjusting fine tuning of the speaker position compensation value specified at (page 54). FRONT50cm80cm150cm+70cm+0cm+100cm Display Item Range “FRONT” Front speaker 0 – 440 cm “REAR” Rear speaker 0 – 440 cm “SW” Subwoofer 0 – 440 cm FRONT ( : Factory setting) REAR REAR 1 Select the source Press the [SRC] button. Select a source other than “STDBY”. 2 Enter Function setting mode Press the [VOL] knob. SUB-W 3 Enter Car Type Adjustment mode 5 Exit Function setting mode Press the [ ] button for at least 1 second. Turn the [VOL] knob and press it when the desired item is displayed. Select “Audio Control” >“Detailed Setup” > “Car Type Adjust”. 4 Select the item you want to set Operation type Selects the item. Operation Turn the [VOL] knob. Adjust each item. Press the [4] or [.] button. Set the value Press the [VOL] knob. The settings of the delay time are automatically identified and compensated by specifying the distances of each speaker from the center of the vehicle interior. 1 Set the front and rear positions and the height of the reference point to the position of the ears of the person sitting in the front seat, and set the right and left positions to the center of the vehicle interior. 2 Measure the distances from the reference point to the speakers. 3 Calculate the distance difference in accordance with the farthest speaker. English | 55 Function of DPX504U DSP Setup X’OverSetting Fine adj...
