Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
RDS stations that have been preset for FM1 cannot also be preset in FM2 or FM3. • When the local seek function is turned whilst auto memory entry takes place, stations with poor reception are not stored. • When the Traffic Information function is on , only the local traffic information station frequency will be stored. — 22 — Cancelling Auto Memory Entry During Its Operation: Press the MENU place to stop the process. Recalling a Preset Station: Press the preset station button The number of the recalled AF (Alternative Frequency) When poor reception is experienced, another frequency broadcasting the same same RDS network with better reception. The . indicator lights up when the AF function is on. Display and setting: "AF ON" : The AF function is on. "AF OFF" : The AF function is off. NOTE • When no other stations with stronger reception are available for the same programme in the RDS network, you may hear the incoming broadcast in bits and snatches. Turn off the AF function in such a case. • The AF function can be turned on or off even when the standby mode has been turned on. If the power is on, the AF function tunes in to stations that offer good reception. Restricting RDS Region (Region Restrict Function) You can choose whether or not to restrict the RDS channels, received with the AF function for a particular network, to a specific region. When the Region Restrict Function is on, the region is restricted. Display and setting: "REG ON" : The Region Restrict Function is on. "REG OFF" : The Region Restrict Function is off. Auto TP Seek When the TI function experienced when listening another traffic information searched for automatically. first powered on. Display and setting: "ATPS ON" : The Auto TP Seek Function is on. If the traffic information station you are experiences poor reception, this function automatically seeks another TP station. "ATPS OFF" : The Auto TP Seek Function is Monaural Reception When poor stereo reception is experienced, this function reduce noise and improve listening conditions. Display and setting: "MONO ON" : The monaural reception is on. "MONO OFF" : The monaural reception is off. Function of the KRC-279RA/279RG/25RA/25RG Text Scroll This function permits the CD text and MD title to be scrolled and the entire text to be displayed. Switching between manual scrolling and automatic scrolling is permitted. The factory default is manual scrolling. Display and setting: "SCL AUTO" : Automatic scrolling "SCL MANU" : Manual scrolling NOTE Sometimes stations in the same network broadcast different programmes or use different programme service names. — 23 — Accessories External view Number of 2 CAUTION English .......................................... 1 1 .......................................... 2 2 .......................................... 1 3 2 CAUTION The use of any accessories except for those provided result in damage to the unit. Make sure only to use accessories shipped with the unit, as shown above. Installation Procedure 1. To prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery. 2. Make the proper input and output cable connections for each unit. 3. Connect the cable on the wiring harness. 4. Take Connector B on the wiring harness and connect it to the speaker connector in your vehicle. 5. Take Connector A on the wiring harness and connect it to the external power connector on your vehicle. 6. Connect the wiring harness connector to the unit. 7. Install the unit in your car. 8. Reconnect the - terminal of the battery. 9. Press the reset button. • If your car is not consult your Kenwood • Only use antenna conversion antenna cord has an • Make sure that all cable inserting jacks until they lock • If your vehicle's ignition does the ignition cable is connected voltage such as a battery cable, the with the ignition (i.e., it will not turn ignition). If you want to link the unit's connect the ignition cable to a power source on and off with the ignition key. • If the fuse blows, first make sure that the cables caused a short circuit, then replace the old fuse the same rating. • Do not let unconnected cables or terminals touch metal car or anything else conducting electricity. To prevent short circuits, also do not remove the caps on the ends of the unconnected cables or the terminals. • Connect the speaker cables correctly to the terminals to which they correspond. The unit may receive damage or fail to work if you share the - cables and/or ground them to any metal part in the car. • After the unit is installed, check whether the brake lamps, indicators, wipers, etc. on the car are working properly. • Insulate unconnected cables with vinyl tape or other similar material. • Some disc changers need conversion cables for connection. See the section on "Safety Precautions" for details. • If the console has a lid, make sure to install the unit so that the faceplate does not hit the lid when closing and opening. — 24 — Connecting Connecto...
Este manual também é adequado para os modelos :Unidade - KRC-15RG (524.59 kb)
Unidade - KRC-179RA (524.59 kb)
Unidade - KRC-179RG (524.59 kb)
Unidade - KRC-25RA (524.59 kb)