(Default setting) Selecting Tuning Mode You can choose from three tuning modes: auto seek, preset station seek, and manual. The "AUTO 1‘ indicator lights up when auto seek tuning is selected, and the "AUTO 2" indicator lights when preset station seek tuning is selected. Display and setting: "AUTO 1" : Auto seek tuning mode (Default setting) "AUTO 2“ : Preset station seek tuning mode "MANUAL" : Manual tuning mode Auto Memory Entry You can automatically store all the receivable frequencies in the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful when you are travelling and do not know what stations are available. Up to 6 frequencies can be stored this way. Display and setting: 1 Select the display "A-MEMORY" during the selecting function in the menu system. 2 Hold down either the or button for two seconds or more to start auto memory function. The numbers of the preset station buttons showed in order. When all the stations in a certain band are stored in the preset memory, the auto memory entry stops. The tuner then plays the last station received. | NOTE| •When the AF function is turned on whilst auto memory entry takes place, only RDS stations (i.e., stations with RDS capability) are stored. RDS stations that have been preset for FM1 cannot also be preset in FM2 or FM3. • When the local seek function is turned whilst auto memory entry takes place, stations with poor reception are not stored. • When the Traffic Information function is on, only the local traffic information station frequency will be stored. Cancelling Auto Memory Entry During Its Operation: Press the MENU button whilst auto memory entry is taking place to stop the process. Recalling a Preset Station: Press the preset station button (#1-6) for the desired station. The number of the recalled station is displayed. AF (Alternative Frequency) Function When poor reception is experienced, automatically switch to another frequency broadcasting the same programme in the same RDS network with better reception. The RDS indicator lights up when the AF function is turned on. Display and setting: 'AF ON" : The AF function is on. (Default setting) "AF OFF" : The AF function is off. | NOTE | When no other stations with stronger reception are available for the same programme in the RDS network, you may hear the incoming broadcast in bits and snatches. Turn off the AF function in such a case. 23 — Menu settings Restricting RDS Region (Region Restrict Function) You can choose whether or not to restrict the RDS channels, received with the AF function for a particular network, to a specific region. When the Region Restrict Function is on, the region is restricted. Display and setting: "REG ON" : The Region Restrict Function is on. (Default setting) "REG OFF" : The Region Restrict Function is off. I note | Sometimes stations in the same network broadcast different programmes or use different programme service names. Auto TP Seek Function When the Tl function is on and poor reception conditions are experienced when listening to a traffic information station, another traffic information station with better reception will be searched for automatically. This function is on, when unit is first powered on. Display and setting: "ATPS ON" : The Auto TP Seek Function is on. If the traffic information station you are tuned to experiences poor reception, this function automatically seeks another TP station. (Default setting) "ATPS OFF" : The Auto TP Seek Function is off. Monaural Reception When poor stereo reception is experienced, this function will reduce noise and improve listening conditions. Display and setting: "MONO ON" : The monaural reception is on. "MONO OFF" : The monaural reception is off. (Default setting) Text Scroll This function permits the CD text and MD title to be scrolled and the entire text to be displayed. Switching between manual scrolling and automatic scrolling is permitted. Display and setting: "SCL AUTO" : Automatic scrolling "SCL MANU" : Manual scrolling (Default setting) Name Preset This function allows you to assign the name to be displayed-for the currently playing disc. See the next page for the name presetting method. Presetting Disc Names (DNPS) : page 18 Power OFF Timer Set the time for the OFF Timer function activated when you selected Standby mode. If the predefined time elapses, this unit's power is automatically turned off. Display and setting: "OFF---" : Power OFF Timer function is cancelled. "OFF 20M" : Unit's power goes OFF after 20 minutes. (Default setting) "OFF 40M" : Unit's power goes OFF after 40 minutes. "OFF 60M" : Unit's power goes OFF after 60 minutes. H i I 25 — Accessories Number of items 1 2 1 | ACAUTIOW~l The use of any accessories except for those provided might result in damag...
Log: