Assessments - 4, GPA: 4.5 ( )

Fabricante : Kenwood Arquivo Tamanho: 645.91 kb Arquivo Nome : Língua de Ensino:

por este dispositivo também tem outras instruções :

Unidade - KRC-791 (2.06 mb)

Unidade - KRC-791 (4.94 mb)

Unidade - KRC-791 (3.14 mb)

• Volume offset: from the 5 Exit Audio Control mode Press the [AUD] button. Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Press the [SRC] button. Select the "ALL OFF" display. 2 Enter Speaker Setting mode Press the [Q] button. 3 Select the Speaker type Press the [ 4] or [ . ] button. Each time the button is pressed the setting switches below. Speaker type Display OFF "SP OFF" For 6 & 6x9 in. speaker "SP 6*9/6inch" For 5 & 4 in. speaker "SP 5/4inch" For the OEM speaker "SP O.E.M." 4 Exit Speaker Setting mode Press the [Q] button. — 8— TEL Mute TEL Mute When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL" display disappears and the audio system comes back ON. Switching Display Switching the information displayed. Press the [DISP] button. Each time the button is pressed the display below. In Tuner source Information Display Program Service name or Frequency Radio text "R-TEXT" Displaying the frequency reception Press the [DISP] The frequency seconds In Tape source Information Play side & Tape counter Play side & Tape running Play side In External disc source Information Display Track Time Disc name "DNPS" Disc title "D-TITLE" Track title "T-TITLE" Switching Clock Display Switching the displayed information. Press the [CLK] button. Each time the button is pressed it switches between display and current source. During clock display the clock indicator is — 9— General features General features Theft Deterrent Faceplate English Selecting the display when this device is switched to Auxiliary input source. 1 Select Auxiliary input source Press the [SRC] button. Select the "AUX" display. 2 Enter Auxiliary input display setting mode Press the [NAME.S] button for at least 2 seconds. The presently selected AUX Name is displayed. 3 Select the Auxiliary input display Press the [ 4] or [ . ] button. Each time the button is pressed it switches through the below displays. • "AUX" • "TV" • "VCP" • "GAME" • "PORTABLE" 4 Exit Auxiliary input display setting mode Press the [NAME.S] button. When operation stops for 10 seconds, the name selected, and Auxiliary input display setting Faceplate Angle The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate 1 Turn the ignition OFF or press the [SRC] button for at least 1 second. The power turns OFF and the faceplate slides open. 2 Holding the center part of the faceplate pull it out. When the faceplate is kept remove open, according to the (page 27) setting, the faceplate is hidden and The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate its special storage case while detached. Do not expose the faceplate or its storage case to or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Reattaching the Faceplate 1 Set the left side of the faceplate Press the [ANG] • Do not apply excessive 2 Press the right damage. • The faceplate — 10 — Hiding the Control Panel Hiding the Control Panel Prevents tampering with the unit while your car is being serviced etc. Hiding the control panel Press the [SRC] button for at least 1 second. The faceplate slides open. When the time set in (page 27) lapses, the faceplate is hidden and the power turns OFF. Showing the control panel Press the left part at the upper side of the faceplate. The faceplate will open and show the control panel. AM FM SRC # 1-6 MENU 4/ . Band display Frequency display Preset station number ST indicator — 11 — Tuner features Tuner features Tuning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. 2 Select the band Press the [FM] or [AM] button. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. 3 Tune up or down band Press the [ 4] or [ . ] button. During reception of stereo stations the "ST" indicator is ON. Canceling Direct Access Tuning Press the [DIRECT] button on the remote. Station Preset Memory Putting the station in the memory. 1 Select the band Press the [FM] or [AM] button. 2 Select the frequency to put in the memory Press the [ 4] or [ . ] button. 3 Put the frequency in the memory Press the [#1] — [#6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each — [#6] button. Direct Access Tuning (Function of remote) Entering the frequency and tuning. 1 Select the band Press the [FM] or [AM] button. 2 Enter Direct Access Tuning mode Press the [DIRECT] button on The "– – – –" display. 3 Enter the frequency Press the number buttons Example: Desired frequency Press button Auto Memory Entry Putting a station with go...

Baixe o seu

Para fazer o download, introduza 2 dígitos :