Record in conformity with the ID3 tag version 1.x. Also, the display may be incorrect if an MP3/WMA file uses the ID3 tag v1.x standard and if this standard has been expanded after production of the machine software. English | 73 Troubleshooting Guide Troubleshooting Guide The following messages are displayed when certain problems are occurring in your system. Take the recommended actions. Hot Error The protective circuit in the unit activates when the temperature inside the unit exceeds 60°C (140°F), stopping all operation. ] Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc will start playing again. Hold Error The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. ] Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc will start playing again. Mecha Error The disc player is malfunctioning. ] Eject the disc and try inserting it again. Contact the Kenwood dealer if this indicator continues blinking or the disc cannot be ejected. Disc Error The unplayable discs is inserted. Read Error The disc is upside-down. ] Load the disc with the labeled side up. The disc is quite dirty. ] Clean the disc, referring to the section on (page 15). Region code Error The DVD software encoded for other region code. Parental level Error The parental level is set to high levels. Error 07 — 67 The unit is malfunctioning for some reason. ] Press the reset button on the unit. If the "Error ##" code does not disappear, consult your nearest service center. 74 | English Specifications Specifications Specifications subject to change without notice. Monitor section Picture size : 6.95 inches wide 154.1(W).87.1(H)mm Display system : Transparent TN LCD panel Drive system : TFT active matrix system Number of pixels : 336,960 (480H.234V.RGB) Effective pixels : 99.99% Pixel arrangement : RGB striped arrangement Back lighting : Cold Cathode Fluorescent Tube DVD section D/A Converter : 24Bit Decoder : Linear PCM/Dolby Digital/dts/MP3/WMA Wow & Flutter : Below Measurable Limit Frequency response Sampling frequency;96k: 20~22,000Hz Sampling frequency;48k: 20~22,000Hz Sampling frequency;44.1k: 20~20,000Hz Total harmonic distortion (1k) : 0.007% Signal to Noise ratio : 98dB (DVD-Video 96kHz) Dynamic range : 98dB (DVD-Video 96kHz) DISC Format : DVD-Video/VIDEO-CD/CD-DA Sampling frequency : 44.1kHz/48kHz, 96kHz Quantifying bit number : 16/20/24bit FM Tuner section Frequency range (50kHz) : 87.5~108.0MHz Usable sensitivity (S/N=30dB) : 9.3dBf (0.8.V/75.) Quieting sensitivity (S/N=50dB) : 15.2dBf (1.6.V/75.) Frequency response (±3.0dB) : 30Hz~15kHz S/N (dB) (MONO) : 70dB Selectivity (±400kHz) : . 80dB Stereo separation : 40dB (1kHz) AM Tuner section (KVT-747DVD/767DVD) Frequency range (9kHz) : 531kHz~1611kHz Usable sensitivity : 28dB. LW Tuner section (KVT-737DVD) Frequency range (9kHz) : 153kHz~281kHz Usable sensitivity : 45.V MW Tuner section (KVT-737DVD) Frequency range (9kHz) : 531kHz~1611kHz Usable sensitivity : 45.V Video section Color system of external video input : NTSC/PAL External video input level (RCA jacks) : 1Vp-p/75. External audio max input level (RCA jacks) : 1V/22k. Analog RGB input : 0.7Vp-p/75. Audio section Maximum Power (Front&Rear) : 50W.4 Full Bandwidth Power (Front&Rear)(at Less than 1%THD) : 22W.4 Preout level (V) : 5V/10k. Preout impedance : 80. Tone action Bass: 100 Hz ±10 dB Middle: 1 kHz ±10 dB Treble: 10 kHz ±10 dB General Operating voltage : 14.4V (11V~16V) Current consumption : 15A Dimensions (W.H.D) Main unit: 182mm.53mm.161mm Hideaway unit: 225mm.40mm.168mm Operational temperature range : -10°C~60°C Storage temperature range : -20°C~85°C Weight Main unit: 2.2kg Hideaway unit: 1.1kg Although the effective pixels for the liquid crystal panel is given as 99.99% or more, 0.01% of pixels may not light or may light incorrectly. English | 75 The marking of products using lasers (Except for some areas) CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit. The marking of products using lasers (Except for some areas) CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit. is a trademark of DVD Format/Logo Licensing Corporation registered in the U.S., Japan and other countries. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this ...
)
