Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
They can scratch the surface of the panel and/or cause the indicator letters to peel off. Cleaning the As dust tends to accumulate clean it every once in get scratched if you put slot. Lens Fogging Right after you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, CDs may be impossible to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer. 2CAUTION Do Not Load 3-in. CDs in the CD slot If you try to load a 3 in. CD with its adapter into the unit, the adapter might separate from the CD and damage the unit. — 4— Handling Playing a CD or warped can skip and the unit incorrectly, resulting sound quality. Take the precautions to prevent your getting scratched or damaged. Handling CDs • Do not touch the recorded side of the CD (the side opposite the label) when holding it. • Do not stick tape on either side of the CD. Tape Storing CDs • Do not store CDs in areas exposed to direct sunlight (such as a car seat or the dashboard) or other hot places. • Remove CDs from the unit when not listening to them for a while, and put them back in their cases. Do not pile up CDs that are removed from their cases or prop them against something. Cleaning CDs If a CD has gotten using a commercially or a soft cotton cloth, starting center of the disc and moving not clean CDs with conventional cleaners, anti-static formulas, or such as paint thinner or benzene. Checking New CDs for Burrs When playing a new CD for the first time, check that there are not any burrs stuck to the perimeter of the disc or in the central hole. CDs with burrs stuck on them may not load properly or may skip while playing. Remove burrs using a ballpoint pen or a similar utensil. Burrs Burrs — 5— Do Not Load Do not use commercially accessories that can slot, such as stabilizers, CD cleaning discs, since they unit to malfunction. Removing the CD Only remove the CD from the machine a horizontal direction, holding it flat. You damage the surface of the CD if you try pulling it down as it ejects. Do Not Use Special Shape CDs • Be sure to use round shape CDs only for this unit and do not use any special shape CDs. Use of special shape CDs may cause the unit to malfunction. COMPACT DIGITAL AUDIO • Be sure to use CDs with disc mark only for this unit. Do Not Use CDs with Sticker on the Labeled Side Do not use the CD with the label sticker stuck on it. Using such a CD may cause the CD to be deformed and the sticker to peel off, resulting in malfunction of the unit. English General Power CLK/ u/ d 4/ . ADJ SRC/ AUD/ PWR OFF A.ADJ PWR OFF AME ADJ AUTO KDC-115S LOUD A.ADJ CRSC 1 2 3 4 5 6 SRC BAND CLK ATT AUD ATT/ #1~5 LOUD ATT indicator LOUD indicator Turning on the power: Press the SRC (source) NOTE Turn the power on before carrying Turning off the power: Press the PWR OFF button for at least Switching Modes Switching Modes: Each time you press the SRC (source) button, the mode switches as follows: Tuner mode CD mode Standby mode Selecting standby mode: Press the SRC button repeatedly and switch to "OFF" . When "OFF" is displayed, the standby mode is activated. The standby mode turns all functions off while leaving the power to the unit on. Use this mode when you want to have the display illuminated but don't want to listen to anything. NOTE The mode switches to the next mode from any mode which cannot be used. Volume Increasing Volume: — 6— Press the u button to turn up Decreasing Volume: Press the d button to turn down Attenuator This function allows you to turn down Turning Attenuator On/Off: Press the ATT button to switch the attenuator When the attenuator is on, the ATT indicator When the attenuator is off, the volume returns level. NOTE Turning the volume up, or turning it all the way down deactivates the attenuator function. Loudness This function amplifies low and high tones when the volume is turned down. The LOUD indicator lights up when the loudness function is on. Turning Loudness On/Off: Press the LOUD button for at least one second to switch the loudness on and off. Audio Control Setting Adjust various parameters of sound quality. 1 Press the AUD button for at least one second to enter the control mode. 2 Selecting mode Press the BAND button. Each time the button change. Please refer to the following modes. NOTE Source tone memory Each source ( FM, AM and CD ) has store the bass and treble tone settings. The settings made for a particular source automatically whenever you use that source mode uses the tone settings made for FM, 3 Adjust each mode Press the 4/ . button. Please refer to the following for the adjusting values. 4 Press the AUD button to end the control mode. "BAS" : Adjust the bass level. Setting values: - 8 – + 8 "TRE" : Adjust the treble level. Setting values: - 8 – + 8 "BL" : Adjust the balance level. Setting values: Left 15 – Right 15 ...