Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
• KDC-C301 / KDC-C600 / KDC-C800 / KDCC601 / KDC-C401 Use the extension cable attached to the CD changer, and the optional CA-DS100 converter cable. • KDC-C100 / KDC-C302 / C205 / C705 / non-Kenwood CD changers Cannot be used with this model. 2 CAUTION You can damage both your unit and the CD changer if you connect them incorrectly. — 3— Safety precautions English NOTE • If you experience problems installation, consult your • If the unit does not seem try pressing the reset button not solve the problem, consult dealer. Cleaning the Faceplate Terminals If the terminals on dirty, wipe them with Cleaning the Unit If the front panel gets dirty, turn power and wipe the panel with a cloth or soft cloth. Cleaning the CD Slot As dust can accumulate it occasionally. Your you put them in a dusty Lens Fogging Right after you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, CDs may be impossible to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a whilst, consult your Kenwood dealer. 2 CAUTION Do Not Load 8-cm (3-in.) CDs in the CD slot If you try to load an 8-cm CD with its adapter into the unit, the adapter might separate from the CD and damage the unit. LOUD PWR OFF VOL ADJ NAME.S PTY MENU CLKSCAN RDM REP D.SCN M.RDM DISC DISC TI SRC Reset button • Characters in the LCD may become difficult to read in temperatures below 41 °F (5 °C). • The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may represent something impossible in actual operation. • The functions that can be used and the information that can be displayed will differ depending on the external disc players being connected. 2 CAUTION Do not wipe the panel with a stiff cloth or a cloth dampened by volatile solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or cause the indicator letters to peel off. The marking of products using lasers (Except for some areas) CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit. — 4— Handling Compact discs Playing a CD that is dirty, scratched or warped can cause the sound to skip and the unit to operate incorrectly, resulting in worsened sound quality. Take the following precautions to prevent your CDs from getting scratched or damaged. Handling CDs • Do not touch the recorded side of the CD (i.e., the side opposite the label) when holding it. • Do not stick tape on either side of the CD. Tape Storing CDs • Do not store CDs in areas exposed to direct sunlight – such as a car seat or above the fascia panel (dashboard) – or other hot places. • Remove CDs from the unit when not listening to them for a whilst, and put them back in their cases. Do not stack CDs that have been removed from their cases or prop them against something. Cleaning CDs If a CD has become using a commercially or a soft cotton cloth, starting centre of the disc and moving not clean CDs with conventional cleaners, anti- static formulas, such as paint thinner or benzene. Checking New CDs for Burrs When playing a new CD for the first time, check that there are not any burrs stuck to the perimeter of the disc or in the central hole. CDs with burrs stuck on them may not load properly or may skip whilst playing. Remove burrs using a ballpoint pen or a similar utensil. Burrs Burrs — 5— Do Not Load CD Accessories in Slot Do not use commercially accessories that can slot, such as stabilisers, CD cleaning discs, since they unit to malfunction. Removing the CD Only remove the CD from the machine horizontal direction. You may damage surface of the CD if you try pulling it down it ejects. Do Not Use Special Shape CDs • Be sure to use round shape CDs only for this unit and do not use any special shape CDs. Use of special shape CDs may cause the unit to malfunction. COMPACT DIGITAL AUDIO • Be sure to use CDs with disc mark only for this unit. Do Not Use CDs with Sticker on the Labelled Side Do not use the CD with the label sticker stuck on it. Using such a CD may cause the CD to be deformed and the sticker to peel off, resulting in malfunction of the unit. General features Power SRC/ Turning on the power: PWR OFF Press the SRC button. NOTE English LOUD PWR OFF PTY MENU CLKSCAN RDM REP D.SCN M.RDM DISC TI . ATT/LOUD FM 4 #1-5 SRC AMAUD u d LOUD indicator ATT indicator Turn the power on before carrying Turning off the power: Hold down the PWR OFF button for Volume Increasing Volume: ...
Este manual também é adequado para os modelos :Unidade - KDC-3080RA (461.92 kb)
Unidade - KDC-3080RG (461.92 kb)
Unidade - KDC-4080R (461.92 kb)
Unidade - KDC-4080RV (461.92 kb)