Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
General General SRC/ Turning on the power: Press the SRC (source) NOTE English #1-5 LOUD PWR OFF AME ADJ A.ADJ CRSC CLKSCAN RDM REP D.SCN M.RDM DISC DISC AUTO FM . AM 4 SRC PWR OFF ATT/ LOUD u d AUD/ A.ADJ CLK ATT indicator LOUD indicator Turn the power on before carrying Turning off the power: Press the PWR OFF button for at Switching Modes Switching Modes: Each time you press the SRC (source) button, the mode switches as follows: Ў Tuner mode Ў CD mode Ў External disc control mode 1 (KDC-4016 only) Ў External disc control mode 2/AUX mode (KDC-4016 only) Ў Standby mode Selecting standby mode: Press the SRC button repeatedly and switch to "OFF" When "OFF" is displayed, the standby mode is activated. The standby mode turns all functions off while leaving the power to the unit on. Use this mode when you want to have the display illuminated but don't want to listen to anything. NOTE • The mode switches to the next mode from any mode which cannot be used. • The external disc control mode will differ depending on the unit that is connected. • The AUX mode is available only when the changer / AUX — 6— switching adapter changer (KDC-CPS85, KDC-connected to this unit. During the AUX mode, When the CA-C1AX is being the External Disc Control Mode. Volume Increasing Volume: Press the u button to turn up the volume. Decreasing Volume: Press the d button to turn down the volume. Attenuator This function allows you to turn down the volume quickly. Turning Attenuator On/Off: Press the ATT button to switch the attenuator on and off. When the attenuator is on, the ATT indicator blinks. When the attenuator is off, the volume returns to the original level. NOTE Turning the volume up, or turning it all the way down deactivates the attenuator function. Loudness This function amplifies low and high tones when the volume is turned down. The LOUD indicator lights up when the loudness function is on. Turning Loudness On/Off: Press the LOUD loudness on and Audio Control Setting Adjust various parameters of 1 Press the A.ADJ button for at least control mode. 2 Selecting mode Press either the FM or AM button. Each time the button is pressed, the adjustment change. Please refer to the following for the contents of the modes. NOTE Source tone memory Each source ( CD, FM, AM and disc changer ) has its own memory in which to store the bass and treble tone settings. The settings made for a particular source are recalled automatically whenever you use that source ( for example, FM mode uses the tone settings made for FM, AM for AM, etc.). 3 Adjust each mode Press the 4/ . button. Please refer to the following for the adjusting values. 4 Press the AUD button to end the control mode. "BAS": Adjust the bass level. Setting values: - 8 - + 8 — 7— General General Clock display Setting values: - 8 - Turning clock display Each time you press the between the clock and each English "BL": Adjust the balance level. Setting values: Left 15 - Right 15 "FD": Adjust the fader level. Setting values: Front 15 - Rear 15 ec4/dB (Sound Coordinate) You can recall the best audio setting preset for different types of the music. 1 Press the AUD button to enter the Sound Coordinate mode. 2 Press a preset button (#1-5). The preset settings of the bass and treble tones are recalled. #1: Flat #2: Rock #3: Pops #4: Jazz #5: Easy 3 Press the AUD button to end the sound coordinate mode. Adjusting Time Adjust the time. 1 When the time is not displayed, first press the display the time. 2 Press the CLK button for at least two seconds to enter clock adjustment mode. The time display will blink. 3 • Adjusting the hours Press the FM button to advance the hours, or press the AM button to make the hours go back. • Adjusting the minutes Press the . button to advance the minutes, or press the 4 button to make the minutes go back. 4 Press the CLK button to end the clock adjustment mode. Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Projections Release button Grooves NOTE You can call the following settings with this function; bass center frequency, bass level, bass quality factor, bass extension, treble center frequency, and treble level setting. — 8— Removing the Removing the . The faceplate is unlocked, NOTE • The faceplate is a precision damaged by shocks or jolts. in its special storage case while • Do not expose the faceplate or its storage sunlight or excessive heat or humidity. Also avoid too much dust or the possibility of water splashing. Reattaching the Faceplate: 1 Align the projections on the unit with the grooves on the faceplate. 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. Tuner features FM/ CRSC . ST indicator AUTO/ AME AM LOUD PWR OFF AME A.ADJ CRSC CLKSCAN RDM REP D.SCN M.RDM DISC DISC AUTO 4#1-6 SRC SRC ADJ FrequencyBand display Preset station number indicator AUTO indicator — 9— Tuner features Tuner features Tuning You can choose between ...
Este manual também é adequado para os modelos :Unidade - KDC-2016 (1.05 mb)